As someone who started in film way back when it was film, and cameras had to be 'blimped' so you could shoot with sound... The game has changed so many times, I've lost track. Embrace the change and always be at the forefront.
I'm a small business owner that has nothing do with the film industry. I have a friend thats a successful photographer that can edit. Would this be a stupid industry to try to break into?
Yeah, man. This thing looks amazing. "There's a touch to it". This has always been my complaint about the consumer grade drones. They just don't have a good feel. Super jealous!
@@bartofilms the microphone would be near the shot being recorded and not from the drone itself. If the sound of the drone does get picked up they can isolate it and remove it.
It’s so, so, so TRUE this statement. Adapt or die. Too many people hold onto the past because of their fear of change making them redundant. Technology & change has opened so many possibilities for future film makers now it’s impossible to say it’s a unionised profession that is ELITE. Just like photography in 2000 when digital changed everything. What was once an elitist form of expression / profession - so has filming in a digital world now become available to a globe of expressive creators. Embrace the change & showcase your finest abilities. NOW IS THE TIME to do so.
Going by all the very average footage we see from most youtube drone operators, I feel your job is very safe. It’s about so much more than simply flying a drone. It’s about the eye, the attention to detail, about producing the most insane footage. Thanks for sharing - I could watch your drone footage every day.
The world needs more Trent Palmer videos. At least I do. I didn't understand half of what was said in this, but all these videos are a calming break from the world. Thanks.
This is entertaining to me. RTK has been in use in agriculture for vehicle navigation for decades now. Amazing to see it come to a use case like this as a new application of it!
Thanks for the review Trent. Great job. As a commercial pilot with 2 Inspire 2's, I am excited about how much of an improvement this new version is. It has been long overdue and I am glad it is finally hear.
DJI are just constantly lifting their game. Very impressive. Once they all move to toroidal props they will also be way quieter which will be a game changer for on set work.
Very nice video to watch . DJI INSPIRE 3 is pretty cool drone for aerial cinematography. I am also using DJI Drones for more than 7 years in Indian Film Industry. I started to use DJI Phantom 3 then phantom 4,Inspire 1,Inspire 2 and now very proud to own & operate DJI INSPIRE 3 . I am a DGCA(India Govt) certified Drone Pilot from Kerala/India. Love all DJI PRODUCTS…❤❤❤
RTK GPS seems to be a new term for what we called *“Differential GPS”* when I was working at Trimble Navigation. We used it for crop dusting systems. The ground station is simply a fixed reference point that compares its known position with the GPS calculated position and then send the difference as a correction value to the in- flight GPS. This correction is what increases the accuracy.
RTK is sort of an "addon" to DGPS. "Pure" DGPS is comparing the known to the GPS position as you describe, but RTK goes beyond this. A RTK system augments the basic timecode used to determine position as transmitted by the GPS satellites with carrier phase information as seen by the base station. By comparing the phase as seen by the base station with that as seen by the receiver RTK can provide additional accuracy beyond "basic" DGPS. DGPS lets you get down to about 3cm level accuracy, while adding RTK lets you reach 1cm or less.
@@ulsig95 GBAS is one implementation of DGPS that provides a communication infrastructure, some special functions, and a common means of access; to my knowledge, GBAS doesn't include RTK functionality (it doesn't use the carrier phase as part of positioning). Usually, then, an RTK system will provide more accuracy but will require more effort to find and use a compatible base station.
I've been waiting for someone that actually shoots aerials full time to review the I3. Nice work Trent! I'd love to come down and check it out sometime.
Heavy lift quote from a friend, downtown San Fran, on the water in the warf, drone fails with a red on it on take off and AD yells and "DRONE TEAMS wrapped" hahahah Thank god for the inspire 3 ;)
From my point of view the big game changer in cameras was the move from film to digital ,all this new stuff basically builds on the digital revolution. Of course if your job is making films/movies having kit that makes your job easier is a bonus. Regards, Jim the Brit in NI UK
Wow this is a really amazing highly technical advancement for the camera drone industry. But only for the truly experienced professionals who knows all the aspects of a machine such as this. Years of experience is required for a flying camera system like this. When needed, I’ll call you for that work.
The reality is the quality coming out of the Inspire 3 is just insanely good. The way the movement feels / looks + recroping, stabilization, tracking (in camera and/or post), composites on routes. You don't need to know anything about all this - you can just look at the quality of the images coming out - the night shots are unreal given the small size on that.
Impressive stuff indeed ... I did however think it was gonna go sideways in the barn shot .. that was a pretty big glitch to the left ... I bet the operator had a heart stopping moment ...
There's absolutely no way I could afford this drone with my current income but I still love it. I'm not even a drone pilot nor a videographer but I used to be a professional photographer and I would be obsessed with learning all I could with this thing. I've watched a few other reviews and it's extremely impressive and it does stuff that I couldn't even comprehend with my lack of knowledge of the TV industry. Love the videos and I hope I get to see more of this beauty in your YT content
Next level living and experience. I’ve found that life is lived in upward levels of advancement in technology and if one is to stay relevant one has to move along with it. Master this one, and move up to the next.
Trent, I just watched this Inspire 3 review video again one year later. Can you/would you consider doing a one-year update on your thoughts of the Inspire 3? Thanks.
I've just seen the inspire 3 in person a week ago and the difference between 2 and 3 is huge. Also the controller is finally what it should have been from the begging, a computer with a large screen, and loads of custom buttons just so you set everything up from there. I finally see the need I'm buying the RTK kit for this one, I'd imagine multi day event coverage would be insane to stitch everything together with a simple fade.
Very impressive ! It is a big decision you took ! You got nerves ! Is the manual flying heavy drone era completely finished or will there be a small niche for some operators? A great video again. Thank you and congratulations for this new change in your business.
Seven year old technology vs. current state of the art - All I could imagine was the difference between a 7 year old cellphone and the current capabilities of the new ones!! Very understandable. You millions are witnessing technology growth at exponential growth versus any of the previous generations!! That's technology and man's desire to dream big.
In addition to all the benefits you explained I guess (1) its more portable and (2) it's a lot less $$$ than a heavy lift. I use drones in the construction sector (UK) based and have RTK enabled fixed wing (AgEagle Sensefly eBee X) plus 5 other DJI drones. I used to have an Inspire. Whilst some clients may wonder why the drone chap is using a Mavic Mini 3 Pro the ever decreasing size and capability is impressive. I flew 8 construction sites yesterday all in built up areas, 7 with a mini and one with a Mavic 2 Pro. Client got the edited videos a couple of hours ago and is very happy. His H&S Manager also pleased as he likes the smallest drone available to be used to eliminate risk. Have to say though how many times do DJI drones fail, very rare. Next purchases will be a Mavic 3 Pro & Enterprise RTK.
Just out of curiosity, will this bad boy & its case fit into the Freedom Fox, Trent? If so, how well? If not, are you contemplating how you can safely & securely mount it?
I don't see a lot of need for a new phantom, since the mavic 3 line delivers enough quality, while still getting the super portable benefits that you miss with phantom style drones. With that said, maybe there is something in the middle between Mavic and Inspire for people like me that would love having a full frame sensor up there but for which the pricing of inspire is just too far away for my business.
Thanks for a great video mate! With Inspire 3 it might become one man's job. First, you can set your waypoint/3D dolly track and then concentrate on the camera gimbal operation. Am I right?
If you don’t need interchangeable lenses and all the other great Inspire features, Keyframe on Skydio can do the same barn shot. Except it’s 1/15th the price. Would love to show you.
Great job doing a thorough review and reporting on how well this works for your business. Anyone want to buy three Inspire 2’s? Well, not really,..as good as the Inspire 3 is, it does not blow the Inspire 2 out of the water. I will be ordering once they have more batteries.
I use rtk on my tractor to get repeatable lines sub inch accuracy it’s really awesome it is satellite tho I am surprised this still uses a base station mine uses a modem and AT&T service subscription
Hello Trent, is there any proxies on the SSD when you you choose to record in DNG RAW ? Also, do you have any issue with the high rolling shutter when shooting in 8K ?
The RTK and real time aperture control are next level for a platform that size. When you overlay all the images like you described for the hangar build, do you just crop in a little bit and the editing software will align them to remove any variations from image to image?
Love the intro to this tech and all the great details. DJI got their money worth from this Promo! Just a note: the swinging back and forth on the hand held shots by the kit had me seasick, actually closed my eyes and just listened a few times.
Egads, a bazillion features! How does anyone keep track of all that?? Just today I tried Adaptive Cruise Control on a loaner car. I had trouble figuring out how to turn it on (no words, just tiny icons I'm supposed to figure out what they mean), but once engaged, it was weird to see it working. Following a car going 5 mph below the speed limit, I was annoyed, but the system didn't care. It just kept its distance and did everything it was supposed to. Technology is so mind-boggling! They say a poor workman blames his tools, but I say a good workman has good tools. Seeing the results, I'd say you're a pretty good workman.
Ahh finally you sold out and got an inspire and i was thinking about buying the Alta 8. is the inspire 3 that good cause i still have my I2 fully kitted
10 months have passed and set life hasnt changed much. Yes, a few heavylift gigs have been swapped to Inspire 3 but nothing crazy. But it was certainly an end of the Inspire 2 Era :D
Great video. Very informative. A Baofeng UV5R. Unless you're licensed and haven't told us, I'd hate to see you get entangled with the FCC too, even at 1 watt and in the middle of nowhere. Those old ones are prone to scatter RF. Just sayin'. GMRS would work.
Thanks for the level of detail! What do you think of Gerald and Josh insinuation that it has the Sony A1 sensor? On the same vein, I assume your ex heavy rig would still be needed when directors want the look of an Alexa or Red, etc.
Great video! At 18:00mins or there abouts I noticed some unintentional sideways movement. Was this the obstacle avoidance kicking in or something else?
"I don't want a bag on it too bad cuz at this point we're getting very nitpicky" -having not set a single negative thing during this entire sales pitch lol
Great video Trent! Gotta say the 50mm doesn’t feel the same. Really can’t wait for more lenses! Gotta get me a RTK after watching this love the day to night transitions you guys did!
There is a bill set to congress to presently ban DJI products from being used by consumers in the USA. If it goes thru congress we will not be able to use any DJI Products in the USA.
and anyone with a 3DR Solo is thinking those 3D dolly and cable cam routes sound familiar. It is about time DJI included these things, they should've moved more smarts to the aircraft instead of relying on the controller to send stick commands for so long.
The technology is really amazing. I just wish we had US companies doing more of this type of stuff. The application of the technology can be used in many different industries.
The main reason why we don't; patents. The cost would be double of this DJI rig just from frivolous patent licensing. They would have to be the size of DJI to defend themselves.
RTK seems to be much like LAAS at airports for precision like approaches. I would really like to see more videos of you working at your job, but I imagine there are restrictions by the production companies. But, maybe, after the movies or ads come out we could see how you did the shots.
As someone who started in film way back when it was film, and cameras had to be 'blimped' so you could shoot with sound... The game has changed so many times, I've lost track. Embrace the change and always be at the forefront.
So I wonder about the noise these things create. I'd imagine they will be for foley work only as microphones will always pick up their rotor wash?
I'm a small business owner that has nothing do with the film industry. I have a friend thats a successful photographer that can edit. Would this be a stupid industry to try to break into?
Yeah, man. This thing looks amazing. "There's a touch to it". This has always been my complaint about the consumer grade drones. They just don't have a good feel. Super jealous!
@@bartofilms the microphone would be near the shot being recorded and not from the drone itself. If the sound of the drone does get picked up they can isolate it and remove it.
It’s so, so, so TRUE this statement. Adapt or die. Too many people hold onto the past because of their fear of change making them redundant. Technology & change has opened so many possibilities for future film makers now it’s impossible to say it’s a unionised profession that is ELITE. Just like photography in 2000 when digital changed everything. What was once an elitist form of expression / profession - so has filming in a digital world now become available to a globe of expressive creators. Embrace the change & showcase your finest abilities. NOW IS THE TIME to do so.
Going by all the very average footage we see from most youtube drone operators, I feel your job is very safe. It’s about so much more than simply flying a drone. It’s about the eye, the attention to detail, about producing the most insane footage. Thanks for sharing - I could watch your drone footage every day.
The world needs more Trent Palmer videos. At least I do. I didn't understand half of what was said in this, but all these videos are a calming break from the world. Thanks.
This is entertaining to me. RTK has been in use in agriculture for vehicle navigation for decades now. Amazing to see it come to a use case like this as a new application of it!
Most of what you said went wayyyy over my head. But one thing I am sure of: If Batman used a drone, this would be the one!
It’s just heavily feature packed for aiding professionals
Thanks for the review Trent. Great job. As a commercial pilot with 2 Inspire 2's, I am excited about how much of an improvement this new version is. It has been long overdue and I am glad it is finally hear.
You're the only one that has mentioned the old lenses still work. Thank you!
DJI are just constantly lifting their game. Very impressive. Once they all move to toroidal props they will also be way quieter which will be a game changer for on set work.
That repeatable shot thing is going to be a MASSIVE selling point for real estate videos, but I couldn't help laugh at the vanishing dog at 14:07 :-)
Very nice video to watch . DJI INSPIRE 3 is pretty cool drone for aerial cinematography. I am also using DJI Drones for more than 7 years in Indian Film Industry. I started to use DJI Phantom 3 then phantom 4,Inspire 1,Inspire 2 and now very proud to own & operate DJI INSPIRE 3 . I am a DGCA(India Govt) certified Drone Pilot from Kerala/India. Love all DJI PRODUCTS…❤❤❤
RTK GPS seems to be a new term for what we called *“Differential GPS”* when I was working at Trimble Navigation. We used it for crop dusting systems. The ground station is simply a fixed reference point that compares its known position with the GPS calculated position and then send the difference as a correction value to the in- flight GPS. This correction is what increases the accuracy.
RTK is sort of an "addon" to DGPS. "Pure" DGPS is comparing the known to the GPS position as you describe, but RTK goes beyond this. A RTK system augments the basic timecode used to determine position as transmitted by the GPS satellites with carrier phase information as seen by the base station. By comparing the phase as seen by the base station with that as seen by the receiver RTK can provide additional accuracy beyond "basic" DGPS. DGPS lets you get down to about 3cm level accuracy, while adding RTK lets you reach 1cm or less.
@@benjaminchung991 Is it similar to GBAS used by aviation?
@@ulsig95 GBAS is one implementation of DGPS that provides a communication infrastructure, some special functions, and a common means of access; to my knowledge, GBAS doesn't include RTK functionality (it doesn't use the carrier phase as part of positioning). Usually, then, an RTK system will provide more accuracy but will require more effort to find and use a compatible base station.
I'm lucky enough to 'want' the Mavic 3 Pro but where you you youngster are going..LOVE LOVE LOVE. That 'dolly in the sky' is mind blowing.
Jerry with the beer in the center console LOL
I've been waiting for someone that actually shoots aerials full time to review the I3. Nice work Trent! I'd love to come down and check it out sometime.
AUD$20 469 base price or USD$14 065 as of 18 Jun 2023. If you want to throw down the cash you will have turn it over a few times.
Heavy lift quote from a friend, downtown San Fran, on the water in the warf, drone fails with a red on it on take off and AD yells and "DRONE TEAMS wrapped" hahahah
Thank god for the inspire 3 ;)
Awesome video Trent, had my Inspire 3 now almost 12 months and love it
Jerry!!! Give him my love. Jeff and I are working this week. We miss you guys!
From my point of view the big game changer in cameras was the move from film to digital ,all this new stuff basically builds on the digital revolution. Of course if your job is making films/movies having kit that makes your job easier is a bonus.
Regards, Jim the Brit in NI UK
Amazing demo at 0:49 could you please let me kknow the name of the track / artist please ? Thank you!
Wow this is a really amazing highly technical advancement for the camera drone industry. But only for the truly experienced professionals who knows all the aspects of a machine such as this. Years of experience is required for a flying camera system like this. When needed, I’ll call you for that work.
The reality is the quality coming out of the Inspire 3 is just insanely good. The way the movement feels / looks + recroping, stabilization, tracking (in camera and/or post), composites on routes. You don't need to know anything about all this - you can just look at the quality of the images coming out - the night shots are unreal given the small size on that.
You can see the potential in that drone's capabilities...wow! It IS on another level.
Impressive stuff indeed ... I did however think it was gonna go sideways in the barn shot .. that was a pretty big glitch to the left ... I bet the operator had a heart stopping moment ...
There's absolutely no way I could afford this drone with my current income but I still love it. I'm not even a drone pilot nor a videographer but I used to be a professional photographer and I would be obsessed with learning all I could with this thing. I've watched a few other reviews and it's extremely impressive and it does stuff that I couldn't even comprehend with my lack of knowledge of the TV industry. Love the videos and I hope I get to see more of this beauty in your YT content
I love how jerry is just rocking a Blue moon in the cup holder. Lol
Next level living and experience. I’ve found that life is lived in upward levels of advancement in technology and if one is to stay relevant one has to move along with it. Master this one, and move up to the next.
Nice to see a peek behind the pro curtain, Trent! Thanks for the vid.
Cool, Thanks for showing a little more of your other world you live in. Love the variety of videos you produce.
Trent, I just watched this Inspire 3 review video again one year later. Can you/would you consider doing a one-year update on your thoughts of the Inspire 3? Thanks.
Good video, I subscribed. I am at a cross road too. Mavic 3 cine pro and wanting to transition to inspire 3! 🎉
Did I miss a hanger update.? Glad you're staying competitive in your field.
Love the shots of Reno, makes me homesick!
I've just seen the inspire 3 in person a week ago and the difference between 2 and 3 is huge. Also the controller is finally what it should have been from the begging, a computer with a large screen, and loads of custom buttons just so you set everything up from there. I finally see the need I'm buying the RTK kit for this one, I'd imagine multi day event coverage would be insane to stitch everything together with a simple fade.
Good morning from Minnesota! Great episode!
RTK GPS is wild. I've been custom building a system for multirotor. It's not cheap!
I've spent my time working on survey crews & using RTK units & I'm blown away that they've been able to incorporate that functionality into this unit.
Was that they Grizzly Ranch golf cart overpass? Sparks marina? Beautiful country that Plumas area! Go get the sierra buttes or lower sardine lake! 👍
I wanted to but when we shot this Gold Lake rd was still under feet of snow!
Very impressive ! It is a big decision you took ! You got nerves ! Is the manual flying heavy drone era completely finished or will there be a small niche for some operators?
A great video again. Thank you and congratulations for this new change in your business.
This video makes me want to sell all my toys and grab an inspire 3 and become a director no lie
💯🧳❤️🔥🎥💎🎞️🎬
Seven year old technology vs. current state of the art -
All I could imagine was the difference between a 7 year old cellphone and the current capabilities of the new ones!! Very understandable.
You millions are witnessing technology growth at exponential growth versus any of the previous generations!!
That's technology and man's desire to dream big.
The repeatable shots reminds me of the old 3Dr Solo's 'smart shots' from @ 8 years ago.
I feel like we're getting a great look at the future for us very novice drone pilots. Thanks for the video Trent!
DANG! what a machine and you have the talent to make it all work! IMPRISSIVE!!!
DJI Inspire 3. Ultimate review. Thank you 👍
18:02 what caused the drone to move to the left? Human input?
great review... question please: is the flight dynamics (top speed, arc etc etc) as good as your heavy lifting custom copter?
In addition to all the benefits you explained I guess (1) its more portable and (2) it's a lot less $$$ than a heavy lift. I use drones in the construction sector (UK) based and have RTK enabled fixed wing (AgEagle Sensefly eBee X) plus 5 other DJI drones. I used to have an Inspire. Whilst some clients may wonder why the drone chap is using a Mavic Mini 3 Pro the ever decreasing size and capability is impressive. I flew 8 construction sites yesterday all in built up areas, 7 with a mini and one with a Mavic 2 Pro. Client got the edited videos a couple of hours ago and is very happy. His H&S Manager also pleased as he likes the smallest drone available to be used to eliminate risk. Have to say though how many times do DJI drones fail, very rare. Next purchases will be a Mavic 3 Pro & Enterprise RTK.
Just out of curiosity, will this bad boy & its case fit into the Freedom Fox, Trent? If so, how well? If not, are you contemplating how you can safely & securely mount it?
I saw a review where they mounted it on a car and the gimble could handle up to about 90 miles an hour. With the speed he flyes it might not work.
@@jginmt I'd be shocked if there's no gimbal-locking mechanism to stabilize the camera when the unit's being moved. Even my old Mavic Pro 2 has one.
Great informative video, let's hope they update the phantom range next or has the phantom been dropped?
I don't see a lot of need for a new phantom, since the mavic 3 line delivers enough quality, while still getting the super portable benefits that you miss with phantom style drones.
With that said, maybe there is something in the middle between Mavic and Inspire for people like me that would love having a full frame sensor up there but for which the pricing of inspire is just too far away for my business.
Dang nice footage from that camera, tech is always advancing and you have to advance with it. Good Job!
Thanks for showing us what highly capable tools can do in the hands of skilled artists!
Thanks for a great video mate! With Inspire 3 it might become one man's job. First, you can set your waypoint/3D dolly track and then concentrate on the camera gimbal operation. Am I right?
Thanks Trent - Love hearing your take on this Much easier to travel with that than the Octo Beast. Good Seeing you Jerry !
You should start a flying fly fisherman channel! I'm into both, but I'm sure there's several viewer who couldn't care less about fly fishing!
Back country flying and fly fishing are the perfect combination! A match made in heaven.
Truly amazing advancement in drone tech...thx
Keep up the great vids...
If you don’t need interchangeable lenses and all the other great Inspire features, Keyframe on Skydio can do the same barn shot. Except it’s 1/15th the price. Would love to show you.
Just WoW (!!) More Quality Gigs Ahead
Great job doing a thorough review and reporting on how well this works for your business. Anyone want to buy three Inspire 2’s? Well, not really,..as good as the Inspire 3 is, it does not blow the Inspire 2 out of the water. I will be ordering once they have more batteries.
Best review I've seen. Incredible technology. You guys are living the dream.
I use rtk on my tractor to get repeatable lines sub inch accuracy it’s really awesome it is satellite tho I am surprised this still uses a base station mine uses a modem and AT&T service subscription
Dude, end of an era.. crazy!
Hello Trent, is there any proxies on the SSD when you you choose to record in DNG RAW ?
Also, do you have any issue with the high rolling shutter when shooting in 8K ?
What an incredible opening sequence !!
That dolly thing is sweet. My skydio 2 does that as well. So much fun.
What an awesome review, so good, I had to watch it again...
The RTK and real time aperture control are next level for a platform that size. When you overlay all the images like you described for the hangar build, do you just crop in a little bit and the editing software will align them to remove any variations from image to image?
If you mark the spot where you set the RTK tripod you'll be within a couple of cm if the terrain is the same.
Love the intro to this tech and all the great details. DJI got their money worth from this
Promo! Just a note: the swinging back and forth on the hand held shots by the kit had me seasick, actually closed my eyes and just listened a few times.
Boy. I bet that baby ain't cheap...
And Trent your edits are just Top Notch for sure...
2nd was the heavy lift a Alta X?
DJI bans in the U.S. currently affecting commercial work, or is it only government agencies?
Egads, a bazillion features! How does anyone keep track of all that?? Just today I tried Adaptive Cruise Control on a loaner car. I had trouble figuring out how to turn it on (no words, just tiny icons I'm supposed to figure out what they mean), but once engaged, it was weird to see it working. Following a car going 5 mph below the speed limit, I was annoyed, but the system didn't care. It just kept its distance and did everything it was supposed to. Technology is so mind-boggling!
They say a poor workman blames his tools, but I say a good workman has good tools. Seeing the results, I'd say you're a pretty good workman.
Ahh finally you sold out and got an inspire and i was thinking about buying the Alta 8. is the inspire 3 that good cause i still have my I2 fully kitted
10 months have passed and set life hasnt changed much. Yes, a few heavylift gigs have been swapped to Inspire 3 but nothing crazy. But it was certainly an end of the Inspire 2 Era :D
Where is the earth rotation effect on the drone?
looked like you almost hit the edge of barn door!!! better have care refresh!!
What kind of wheeled work-cart was that? I like the size and how robust it looks.
A friend and I custom made it, it’s pretty cool although I would probably prefer one of the Inovativ carts
Amazing technology. Thanks for sharing.
So what would Freefly need to do to the X to make it a go to again?
DJI Inspire 3 looks like a game changer!!!!!
Great video. Very informative.
A Baofeng UV5R. Unless you're licensed and haven't told us, I'd hate to see you get entangled with the FCC too, even at 1 watt and in the middle of nowhere. Those old ones are prone to scatter RF. Just sayin'.
GMRS would work.
Thanks for the level of detail! What do you think of Gerald and Josh insinuation that it has the Sony A1 sensor? On the same vein, I assume your ex heavy rig would still be needed when directors want the look of an Alexa or Red, etc.
Best i3 review out there! Thank you
Great video! At 18:00mins or there abouts I noticed some unintentional sideways movement. Was this the obstacle avoidance kicking in or something else?
Saw that. Wonder too
@@kevinfagan1117 I think Gps under the roof wasn't strong enough
Is there a video in how to get into this type of industry ? By Trent of course
if I wanted to get into cinema drones after getting my part 107. Where is the best place to get learn more about or best drones to get started with?
"I don't want a bag on it too bad cuz at this point we're getting very nitpicky" -having not set a single negative thing during this entire sales pitch lol
Great video Trent! Gotta say the 50mm doesn’t feel the same. Really can’t wait for more lenses! Gotta get me a RTK after watching this love the day to night transitions you guys did!
Anyone else think of WAAS when he was explaining RTK? It’s like a miniature version of it.
I tried to fly a great rc helo up a staircase, no good. Stairwell maybe?
Great video on the topic, but you forgot to mention costs?
holy crap your friend that pulled up, is meant for camera talk he jumped into that little review like a pro lol
Nice video & review, but, what happened at 18 min?
Cool.
Do you prefer the ProRes Raw, cDNG or something else for the best quality?
There is a bill set to congress to presently ban DJI products from being used by consumers in the USA. If it goes thru congress we will not be able to use any DJI Products in the USA.
Another awesome video. in your opinion，is there a noticeable difference between full frame and APS-C?
and anyone with a 3DR Solo is thinking those 3D dolly and cable cam routes sound familiar. It is about time DJI included these things, they should've moved more smarts to the aircraft instead of relying on the controller to send stick commands for so long.
The technology is really amazing. I just wish we had US companies doing more of this type of stuff. The application of the technology can be used in many different industries.
The main reason why we don't; patents. The cost would be double of this DJI rig just from frivolous patent licensing. They would have to be the size of DJI to defend themselves.
RTK seems to be much like LAAS at airports for precision like approaches. I would really like to see more videos of you working at your job, but I imagine there are restrictions by the production companies. But, maybe, after the movies or ads come out we could see how you did the shots.
My thought exactly. I’m pretty sure your referencing WAAS. Seems to work the same way on a small scale.
I saw manual input before you exited the barn, dolly can’t be that good lol.