Excellent sleuthing and what a great find! Thanks for passing that along. I have no problems yet but I'll be looking mine over for any signs that that might be happening. Preventative maintenance is the best kind of maintenance.
Just found your video about rough running 7.3 thanks for the video. Hope your doing well. Maui just burned down recently I hope you didn’t lose anyone.
When they run they're the best truck ever and when they break it can be the end of the world!..so many potential problems with so much wiring..the I.C.P sensor will make the idle drop to 300rpm if it's bad..if you unplug it with the truck running and the idle goes back to normal then it's the I.C.P.. normally when they go,or if you unplug it,the check engine light will come on..i just overhauled my 95,got it up to 1.5 million km!
Nice truck, I saw the thumb nail and was like, dat looks like the bay! Looking to pick up one of these 7.3 really soon, been researching like crazy. Just hard to find anything good on maui. Thanks for the video bradda!
Awesome! I’ll check mine ASAP! Also I have a fuel leak and it’s the weep hole on the pump there’s also a small filter that needs cleaning and if clogged there’s a lose of power on any incline!
Thanks for the help. I have a 97 and the same wires are exposed. A while ago I also discovered to check your wire harness under your intake side of the turbo since it tends to push on it screwing with its ground and thats totally messes everything up
I have a 04 f250 turbo diesel it's doing the exact same thing been like that for like 3 months now can't figure out what it was, got changed the fuel pump filter, flushed the lines, cleaned the Injectors but still doing the same thing
hey 7.3L OBS a got a question i replace the fuel bowl housing,glow plugs,heads injectors harness wiring,IPR & ICP sensor bran new oil and fuel filter AND THE CHECK ENGINE LIGHT COME ON... just when get warm up. (never came on before with the stock parts an sensors.) may day may day hellllpppp.,please (97 f250 7.3L powerstroke obs.)
I know this is old and I hope you've fixed it by now but just fyi to you and anyone else reading this: Most scanners at auto parts and for home use can't scan the 7.3l you need something like AE (auto enginuity) or a snap on or equivalent scanner. When parts stores try to scan mine it makes the truck stall and they tell me they can't connect
Hey with the Dana swaps do I have two change both axels or just the front if I want to engage 4x4 for long periods of time like in the snow or something??
Nothing is deleted. Still has A/C had aftermarket intake and the stock black plastic cover over the fuel bowl has been removed. Might make it seem more roomy
Don't know if that's what's wrong with mine, but I'm betting I know more now than I did. Now if I can find some videos on this crappy shifting auto behind the 7.3
Matt Eberhardt Thanks. It has aftermarket exhaust from the turbo back. K&N intake. Dana 60 swap. Other than that it’s pretty much stock. I have changed all the fluids to full synthetic.
I don't have that problem, yet. But, thanks for the video! I could see this being a real issue later on when my truck gets a few miles on it. Tip....On your next video, try to stop doing the "tisking" with your tongue. Seriously, it's annoying. You probably don't realize how often you do it.
Have the same year truck and model, Recently Acquired a Dana 60 front and rear assembly out if a 95 f350 Intend to switch soon, Would like to know any suggestions. Extra parts needed for swap, Reverse shackles front/rear, suspension blocks for rear, different Pitman arm. What springs for front (suggested Super duty springs for front or f350 rated , and what springs in rear? Interested in a hight of 4". My truck is an automatic. . Any help , greatly appreciated. Thanks
hey 7.3L OBS a got a question i replace the fuel bowl housing,glow plugs,heads injectors harness wiring,IPR & ICP sensor bran new oil and fuel filter AND THE CHECK ENGINE LIGHT COME ON... just when get warm up. (never came on before with the stock parts an sensors.) may day may day hellllpppp.,please (97 f250 7.3L powerstroke obs.)
Thanks for posting. Everyone who has a 7.3 appreciates it.
Excellent sleuthing and what a great find! Thanks for passing that along. I have no problems yet but I'll be looking mine over for any signs that that might be happening. Preventative maintenance is the best kind of maintenance.
Just found your video about rough running 7.3 thanks for the video. Hope your doing well. Maui just burned down recently I hope you didn’t lose anyone.
I’m having the same problem. Thanks for the help. It was driving me crazy finding a solution.
Glad to help
You are my favorite person right now. My 97 just started during this. It was driving me nuts. I have the same cold air intake.
Right on glad to help. It was driving me crazy as well. 👍
I am having this issue right now. I changed the IPR Sensor also. Now going to the harness. Thank you!
Thanks hope you figure it out.
My 95 did the exact same thing. Thank you so much! This was driving me nuts trying to figure out! Lol
Awesome I have been pulling my hair out trying to figure out this exact problem thanks for making this video!!
Right on glad the video helped
When they run they're the best truck ever and when they break it can be the end of the world!..so many potential problems with so much wiring..the I.C.P sensor will make the idle drop to 300rpm if it's bad..if you unplug it with the truck running and the idle goes back to normal then it's the I.C.P.. normally when they go,or if you unplug it,the check engine light will come on..i just overhauled my 95,got it up to 1.5 million km!
Yeah that is so true. Nice to here them going that long. You must be doing something right. 🤙
Nice truck, I saw the thumb nail and was like, dat looks like the bay! Looking to pick up one of these 7.3 really soon, been researching like crazy. Just hard to find anything good on maui. Thanks for the video bradda!
Thanks. Yeah I had to go to Oregon to get it. They are not easy to find on the Islands.
@@chasegj I feel you on that, been looking to go up to find something, there's a truck pandemic right now.
I noticed those wires exposed today now I will check them out closer thanks.
Awesome! I’ll check mine ASAP! Also I have a fuel leak and it’s the weep hole on the pump there’s also a small filter that needs cleaning and if clogged there’s a lose of power on any incline!
Good luck. I had to replace my fuel pump a while back it was leaking as well.
Dude ,thanks so much for the video,my truck is doing the same lately I was already going crazy.again thanks 👍👍👍👍😜👍
Thanks for the help. I have a 97 and the same wires are exposed. A while ago I also discovered to check your wire harness under your intake side of the turbo since it tends to push on it screwing with its ground and thats totally messes everything up
Thanks. That’s good to know any potential spots. It can be tricky tracking down wiring issues
Thank you for posting this!
I am so glad you made this video! Thank you very much!
No problem glad it could help you out
The engine oil temp sensor was going out on my 96er...caused the same issue.
yeah I just bought a 94 of the same truck, going to the KN, when I have it out will do that same fix.
Great help and video. Thanks
Glad to help
Thanks for your time bro. Good deal
My 03 is doing the exact same thing. Hoping this is all it needs as well
Yeah good luck it was driving me crazy until I found what is was
Thank you for your knowledge and time ..
Glad to help
I have a 04 f250 turbo diesel it's doing the exact same thing been like that for like 3 months now can't figure out what it was, got changed the fuel pump filter, flushed the lines, cleaned the Injectors but still doing the same thing
Awesome thanks for the help
hey 7.3L OBS a got a question
i replace the fuel bowl housing,glow plugs,heads injectors harness wiring,IPR & ICP sensor
bran new oil and fuel filter
AND THE CHECK ENGINE LIGHT COME ON...
just when get warm up.
(never came on before with the stock parts an sensors.)
may day may day hellllpppp.,please
(97 f250 7.3L powerstroke obs.)
Have you ran a diagnostic on it to see what code it is throwing. That would be the best place to start
@@chasegj i take it to the auto parts and they said no codes
the scanner don’t reed nothing
I know this is old and I hope you've fixed it by now but just fyi to you and anyone else reading this:
Most scanners at auto parts and for home use can't scan the 7.3l you need something like AE (auto enginuity) or a snap on or equivalent scanner.
When parts stores try to scan mine it makes the truck stall and they tell me they can't connect
Hey man i have an old 92 7.3 IDI non turbo, i want to do a dana 60 swap but i have coil springs in the front, what do i do to convert to leafs?
Hey with the Dana swaps do I have two change both axels or just the front if I want to engage 4x4 for long periods of time like in the snow or something??
Just the front. It’s set up just as if it were a F350.
Holy spaceeee!!! What did you delete ? The air compressor and ac system?
Nothing is deleted. Still has A/C had aftermarket intake and the stock black plastic cover over the fuel bowl has been removed. Might make it seem more roomy
Don't know if that's what's wrong with mine, but I'm betting I know more now than I did. Now if I can find some videos on this crappy shifting auto behind the 7.3
Yeah the Auto trans in the 7.3 has always had problems. I hear you can get them rebuilt really strong. That’s why I went with a 5spd though.
@@chasegj its plenty strong, just don't like to shift till about 2500 rpm. I'm sure it's a module or sensor, but no joy so far.
97 7.3 here as well. Impressed with how quickly your fires up. What other work have you done to it? Thanks for the video
Matt Eberhardt Thanks. It has aftermarket exhaust from the turbo back. K&N intake. Dana 60 swap. Other than that it’s pretty much stock. I have changed all the fluids to full synthetic.
@@chasegj get that K&N out of there. Pretty well know to dust turbos and motors.
BBslider001 good to know will look into it
Stickshift. Good man!
Hey question what issues did you have while driving? Mine feels like it’s starving for fuel then is fine just thought I’d check thanks
Yeah exactly how mine felt
I had bad injectors when this happened to me. I'd have good power then nothing. Then it would be fine again. Hard idle at stops and stuff
Have you replaced the CPS? I had the same problem. I highly recommend the international cps from dfuser. It’s about $45.
Hey Ralph did you ever figure out your problem
Thank you my friend
Thank you!!!
also great video and good thinking.!
Thanks I will check my wires.
I don't have that problem, yet. But, thanks for the video! I could see this being a real issue later on when my truck gets a few miles on it.
Tip....On your next video, try to stop doing the "tisking" with your tongue. Seriously, it's annoying. You probably don't realize how often you do it.
did your CHECK ENGINE light come on too?
No check engine light. Just random rough idle
@@chasegj a friend told me it may be the crankshaft sensor too.
Yes rough idle can be caused by many different things. This just happened to be my problem and was an easy fix.
Nice Truck
Thanks
Have the same year truck and model,
Recently Acquired a Dana 60 front and rear assembly out if a 95 f350
Intend to switch soon,
Would like to know any suggestions. Extra parts needed for swap,
Reverse shackles front/rear, suspension blocks for rear, different Pitman arm. What springs for front (suggested Super duty springs for front or f350 rated , and what springs in rear?
Interested in a hight of 4".
My truck is an automatic. . Any help , greatly appreciated.
Thanks
Thanks my is doing the same thing
Thanks hope it helps. Good luck
Hey man do you have a number I can reach you at ? I would love to discuss the problem I have with my 97 with you
hey 7.3L OBS a got a question
i replace the fuel bowl housing,glow plugs,heads injectors harness wiring,IPR & ICP sensor
bran new oil and fuel filter
AND THE CHECK ENGINE LIGHT COME ON...
just when get warm up.
(never came on before with the stock parts an sensors.)
may day may day hellllpppp.,please
(97 f250 7.3L powerstroke obs.)
I'm sorry to say it but I love the power stroke but soon as I have some spare time I'm going to do a conversion to a 12 valve Cummins
So ur saying this is why my truck likes to act like it’s has a huge ass lumper cam during startup
I like
Can you count how many times he smacks his tongue?