Learn EVPN Route Type 2 and Type 3

EVPN & VXLAN which stands for Ethernet Virtual Private Network and Virtual Extensible Local Are Network. These are two independent protocols which, when working together, offer a great deal of routing capabilities to service provider, data center and enterprise networks.
In this video, part 3 of this series, we will start learning about 2 of the 5 EVPN packet types. Specifically we'll go through Route Type 2 which is used for unicast MAC/ IP advertisement as well Route Type 3 Inclusive Multicast. As the name implies this is for 'handling' multicast traffic within an EVPN network, and a bit more.
👇👇 You can find me on 👇👇
/ davidtownsend1983
=====================================================
💯 Subscribe to keep up with the best Juniper & Junos content 💯:
/ @netcademy
=====================================================
#junipernetworks #juniper #routing #evpn #network #networksolutions #telecommunications #networkengineer #technology #tech #techtalk. #datacenters #cisco #routingandswitching #junos

[@kris___5655]

Thank you for explaining in detail

[@Netcademy]

@@kris___5655 you’re welcome and thank you for your support

[@jonallan121]

Just recently came across your material when looking for some videos to help some colleagues. This is a Great series !
Just one observation… ingress replication is unicast so we wouldn’t expect it to be sending to both spines? It would still send the same amount of bytes as multicast?
The efficiency with multicast is that only those leaf switches with that vlan/Vxlan would require a copy.
Correct me if I assume wrong though, please?
Keep up the amazing content!

[@cankaranisoner9208]

This is best series for EVPN-VXLAN bro. Like bread and butter :D

[@Netcademy]

Thanks very much for the positive feedback

[@mahikris9625]

Excellent explanation .. better if you can show some packet capture added with this .. but great work thank you so much ...

[@Netcademy]

Thanks so much for the positive feedback. My approach is to do the theory first and then in the labs, in verification phase, to do packet captures 👍 So stay tuned as videos on deployment, configuration and verification are coming soon….

[@faridyc344]

Thanks for this great video , just perhaps a correction concerning mp-bgp evpn safi value (70)

[@Netcademy]

Yes, you are right

[@coriolanus14]

HI, thanks for sharing this. Btw, are you using a L3 etherchannel to connect the host to Leaf2 and Leaf3? If not it shouldn't work, unless you connect Leaf2 and 3 with a mlag,vss,vpc...

[@Netcademy]

Hi, you are absolutely correct! It would not work but I have seen cumulus being used to connect a host/ server to different leafs but honestly I don't know the configuration. In this video the video wasn't about the hosts/ servers. The connection is there just for illustrative purposes, nothing more. Thanks