Ciao Antonio, ci mancherebbe! Se ricordo bene la pedaliera aveva un problema sulla parte regolatrice, in poche parole tu fornisci alla pedaliera un voltaggio in alternata, ed internamente c'e' la rettifica, filtraggio e regolazione di voltaggi. Un paio di regolatori erano passati a miglior vita. Poi encoder e interruttori e' il pane quotidiano per i line6 pod 2.0, xt, e le versioni a pedaliera dei suddetti. Hanno i loro anni e i segni di usura si fanno sentire. Se ti va seguimi su instagram a mad_customelectronics
If I recall it right, one of the two voltages regulators: 7815(U2) and 7915(U3) was shorting to ground, and doing that, also the screen backlight circuit wasnt working. If you are familiar with electronics and have a multimeter, check if at the output of U2 an U3 you have +15V and -15V, and check also for shorts. If you are not so familiar with electronics, search for a local repair shop. Hope you fix your multifx
@@mikestormm Thank you a lot for the answer. I fixed the same problem in my POD, but I found another problem. U21 (LATTICE LC4128) doesn't generate 15MHz and 6MHz clocks (the screen just flashes, and the system doesn't start). Did you face the same problem?
@@TVSefero never had this issue before. Nowadays pod xt and xt live are coming in less. We had a huge demand for hd500 and hd500x fix. Hope you fix your multufx
How to plug it properly? I plugged the bass line into INPUT (tried both norm/pad) and then from the output of the Basspod (try both line/amp) to my amp. But I don't have any sound... Am I doing something wrong?
Hi Charlotte, your bass cable goes to input, from the Left/Mono output you go to your amp, and try to rotate clockwise the little plastic volumepot shaft you see just close to the Left/Mono out. Let me know if it makes sound
I still use it too for many years...
I personally have the Pod XT, served me well while gigging, at the moment I dont play live anymore but its fun to play with.
Ciao Antonio, ci mancherebbe! Se ricordo bene la pedaliera aveva un problema sulla parte regolatrice, in poche parole tu fornisci alla pedaliera un voltaggio in alternata, ed internamente c'e' la rettifica, filtraggio e regolazione di voltaggi. Un paio di regolatori erano passati a miglior vita. Poi encoder e interruttori e' il pane quotidiano per i line6 pod 2.0, xt, e le versioni a pedaliera dei suddetti. Hanno i loro anni e i segni di usura si fanno sentire. Se ti va seguimi su instagram a mad_customelectronics
Ciao, spieghi in italiano?
Hello, I have the same problem with my pod. May you say what the exact problem was on your device? Thank you.
If I recall it right, one of the two voltages regulators: 7815(U2) and 7915(U3) was shorting to ground, and doing that, also the screen backlight circuit wasnt working. If you are familiar with electronics and have a multimeter, check if at the output of U2 an U3 you have +15V and -15V, and check also for shorts. If you are not so familiar with electronics, search for a local repair shop. Hope you fix your multifx
@@mikestormm Thank you a lot for the answer. I fixed the same problem in my POD, but I found another problem. U21 (LATTICE LC4128) doesn't generate 15MHz and 6MHz clocks (the screen just flashes, and the system doesn't start). Did you face the same problem?
@@TVSefero never had this issue before. Nowadays pod xt and xt live are coming in less. We had a huge demand for hd500 and hd500x fix. Hope you fix your multufx
How to plug it properly? I plugged the bass line into INPUT (tried both norm/pad) and then from the output of the Basspod (try both line/amp) to my amp. But I don't have any sound... Am I doing something wrong?
Hi Charlotte, your bass cable goes to input, from the Left/Mono output you go to your amp, and try to rotate clockwise the little plastic volumepot shaft you see just close to the Left/Mono out. Let me know if it makes sound