NC Studio HOW TO set up all the parameters to a new CNC machine A to Z
Вставка
- Опубліковано 10 чер 2022
- A Roger Clyde Webb easy learning CNC tutorial NC Studio HOW TO set up all the parameters to a new CNC machine A to Z
Help support my channel and become a Patron www.patreon.com/user?u=15079773
The Australian Inventors Workshop™ 2022
Sponsored By
Thunder Laser Global
My CARVECO code 5% discount code is
ROGERWEBB5798
(ONLY AT THIS ADDRESS BELOW)
store-us.carveco.com/?ref=B40...
Everything @ Banggood DE 2.5% discount
(ONLY AT THIS ADDRESS BELOW)
aklam.io/9Dh0ux
My Fusion 360 20% discount
(ONLY AT THIS ADDRESS BELOW)
AMAX 3636, MIDI 4040, MAXI 1212, CNC Router, Sieg X2 CNC Mill & Sieg 4 x 20 CNC Lathe
Plans and parts listing available on my Patron pages
WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 16! Disclaimer: These videos, commentary, and or advice are intended for entertainment and inspiration for adults over 16 -year-old. Woodworking and metalworking are dangerous. Always seek professional advice and training before using any power tools or CNC machines. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand, that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.
Hi Mr. Roger, great explanation, there is one other thing I would like to add to help with accuracy, the travel distance for the axis can be calculated quite easily and accurately using proportions and would eliminate guess work, here are the facts (1) Your first ruler measurement was very close to 8mm (2) your pulse setting was 10mm (3) your screen settings that produced 8mm movement was 0.003125. because lowering the screen setting number (0.003125) increases travel distance, follow this procedure:
Multiply the axis distance travel (8mm) by the screen settings (0.003125), divided by the desired axis travel (10mm) or (8*0.003125)/10= 0.0025.
This works for all axis, hope this helps😏.
Big thanks to both of you!
I need help... My CNC machine isn't cutting a perfect circle perfectly. It ends up looking oval shaped. Any help as to how to resolve this issues..?
@@nelsonpac6870 Your X and Y axis configuration settings, along with the stepper/servo motor drivers dip switches must have the same settings. If there steps per inch/mm are different, when the g-codes to cut a curcle is received, it will distorte the shape, I am pretty sure that everything is off, you probable only recognized it because you tried to cut a circle. If you are using mach3/NcStudio etc, set the "X" and "Y" motor step per inch/mm the same and then then calibrate your machine and this should solve your problem. I would also suggest to increase accuracy, avoid using small measurements like 5 inches but use the longest distance possible along the X and Y table.
formula for calibrate:
motor parameter( y x z ) × fact distance / distance jog (10) = correct motor parameter
Nice work! Thanks! I can add a bit information about calculation of pulse) With that no need to measure real travel path. It can be programmed after simple calculation. 1st - Motor Step angle - How much degrees motor rotate per one pulse (Usually 1.8 degree) 2nd is Driver pulse setting (Setup of switches on step motor driver, on the driver we have table picture), and that pulse setting helps to get accuracy, smooth work, accelerations and much much more for great work of CNC machine. And 3rd - Sizes of ball screw, diameter, screw angle, screw pitch and lead. For example.. Motor step is 1.8 degree. One full revolution of screw is 360 degree. 360/1.8=200.. That means, for 1 rotation of screw need 200 Steps (Pulses). On the driver we have setting of pulse 400 and at these time motor will get 400 pulses for 1 revolution, 360/400=0.9 degree (Driver divide motor steps). For example Screw lead = 10mm, what means, that 1 full revolution of screw will move axis on 10 mm in linear path. So we know that 200 pulses will move axis on 10 mm without divide, then 10/200=0.05, where 0.05mm is one pulse. If Driver divides steps like 400 pulses/rev, then 10/400=0.025mm is one pulse. If driver divide on 1600, then 10/1600=0,00625mm and etc. Dividing fix accuracy, noise, vibrations of motor and etc.. And to finish.. Lead can be different cause We can have a single thread screw or two thread screw.. With single all works like typed, with two threads, we need to divide number on 2. Driver dividing is very important, cause biggest dividing give accuracy, but slows speeds of revolutions and making noise, vibrations.. Lower dividing means lower accuracy, but speeds grow up and machine work smoothly. About Servo motors is the same.. there need to know servo encoder step.. and if we have some kind of gearbox, then also need to know gear ratio for dividing pulse. Angular axis works without lead calculations, but we can have a gearbox, so that is simple)) I hope it can help to save time and get ideal settings for CNC mashine)
thanks, always great info!
Hi Roger, I just want to know did you get the BKREF window open. I need to reset my machine coordinates
Good morning Roger, thanks for the video. One thing that I couldn’t catch in the tutorial, was how to “make it home itself” what button did you press to initiate homing
Hello dear, thanks for the lecture. Once time the motion card is installed, does it pair with the computer? Or does not need to be unpair?
Hello can you tell me how I can unchecked the full screen view I can't find it 😂
Thank you for the tutorial but How do you pop up the window for bkref you don’t show that part for setting up homing.
Thanks a lot sir !!!!!
Most welcome!
Hi Rodger I’d love if you could use your expertise to build and setup a CNC plasma table
I think a version from. Your vast knowledge would be spot on
Great suggestion!
hi, rojer can you help my limit switches are working and turn green in iostate but still dont stop the movement ,any help would be great ,and what a great video.
thanks myferind for training
Good video friend. help me with a problem, the sensor of the axis of the z does not mark the limit in the program nc studio. make a metal to the sensor to see if the red light comes on and if it comes on, but in the program it does not turn on the alarm. can you help me please.
thank you ..Roger this is a alternative for me..
Hi Fred, NCstudio only works with Windows XP and 7. 32 bit ok.
@@rogerwebb9600 thank Roger ..yes Roger ..,I was going to ask you with what program it could used..thank you again.👍🏼👍🏼
I have a video that may help you,
ua-cam.com/video/xnwgxgW89nw/v-deo.html
Hi Riger Thanks too much i'm a beginner
hello Mr Roger I just bought a CNC and it came with the NC STUDIO software that I have already installed and follow the settings procedures on your channel and many thanks please I would like to know which software (aspire, artcam, etc.) would allow me to extract the G-CODE for this software and if possible the procedure for importing the G-CODE into NC STUDIO. Thanks in advance
Good morning Rodger our nc studio v10 is display it's like Manu jog Estop what's could be a problem please help
Hi, there is a facility on my patron pages for technical help www.patreon.com/user?u=15079773
Thank you...🇰🇿🇰🇿🇰🇿🇺🇲🇺🇲🇺🇲
Sir i got i problem, i don't know how to remove the full screen in the cnc router, the logiciel is blocked, i need your help
Hi can you please tell me how I can change home position and axis directions in nc studio v5 ?
Hi, there is a facility on my patron pages for technical help
www.patreon.com/user?u=15079773
What did you press to try z, x and y at 14.27 minutes of the video? Thanks in advance
Did you find the answer brother? i couldn't figure out what he did to activate the limit switches
URGENTLY PLS! I need help... My CNC machine isn't cutting a perfect circle perfectly. It ends up looking oval shaped. Any help as to how to resolve this issues..?
Does it work if we have mach3 board on the PT-6012?
NCstudio will work with 99% of CNC routers
Good morning
hello rodger ! is ncstudio work with hom cnc 3018 3 axis mini diy? i by from bangood. is the program free? can you send the drivers icon to downlowd it pleas? thenk you so mach
Hi, Can i use NC Studio for plasma cutter...? Tnx in advance..
Sorry, no
Where can i get this software
Please tell me:Wat is manufacring code?
Hi, the code is ncstudio one word all in lower case
which camputer are you using???
XP
Прошу подскажите как ввести компенсацию люфта в НЦ студио.
What happens at 15:10? A dialogue window pops up but I don’t see where you selected to open it. Thanks.
I will do a video
Can you post the link to the video I can’t find it ?
Or just say how to pop the window up to set the homing positions
you still run this software ? im keen to video call ya and have u talk me thru the setup cos the way u did it is not on my software on ncstudio 8.270 hw WH-PCIMC6A
Can we use this software for cnc micro milling machine?
Sorry no
@@rogerwebb9600 then which software i should use pls suggest me..
Have a look at GRBL for a 3018 CNC router this is universal for small machines.
Mach3 needs dedicated systems to work, see my videos for more information
ciao e complimenti , ti chiedo come poter invertire gli assi su nc studio , perche sulla mia cnc mi va al contrario grazie mille
hi ROGER .i DO NOT KNOW TO STOP A JOB AND RESTART NEXT DAY.FROM LINE WHERE I STOPED JOB.i HAVE A CNC WITH nc studio
I will do a video on it
Nc studio file link shere please
Hello Mr Roger thank you for that amazing explanation,I have question iam currently trying to buy 4 axis wood router and the company is giving me the choice between mach 3 and nc studio ,iam familiar with mach 3 but iam afraid to try new software such as nc studio do you recommend nc studio for 4 axis CNC wood router
Mach 3
@@rogerwebb9600 thank you Mr Roger
i cant download nc studio
I bought a china cnc years ago, but the software never I could not even loaded.
Yep, this can happen if you have a doggy copy of NCstudio. It's better to download a copy direct from Weihong NCstudio
@Prince Valiant Yeah I can't find it either, I use it in work, I'm trying a few things at home and I'd like to test the simulation but I just can't find where to download it from.
Hi
does this software will run on windows 10?
Здравствуйте не найдется перевод на русском языке этого видео
Sir your number
Patron!