Hello! What kind of contents you are interested in? Share in the comments! 👇 Check out our website to discover more about Wattsan machines: wattsan.com/?+comment&+studio+vs.+dsp+controller+%2F+wattsan+cnc Follow us on Instagram: instagram.com/wattsancnc/ You can contact our managers. They will answer any of your questions: info@wattsan.com
Hi, Daniel! We've got you covered. Please, check our video tutorial on how to use a DSP controller: ua-cam.com/video/8rgotkfmf1U/v-deo.html If you're looking to buy one, please, specify your country of residence.
Hello! Thanks for the question! Parallel port usually works with MACH3, NC studio have PCI board that process signals for machine. It's doesn't need a parallel port and cannot use it.
@@Wattsan I purchased an NC studio card which came with a 15 pin breakout board. It came without documentation. My stepper drive has pins as Pulse+, Pulse -, Dir+, Dir - . I understand the Pulse - & Dir - are to be connected to ground. The 15 pin breakout board has two pins as 5v & 2 pins as G. Logically since these pin outs are coming from the pci card, one should not give the 15 pin breakout board an external 5v supply right? Would that also mean that Pulse - & Dir - should be connected to pin marked as G on break out board?
Dear Wattsan, You said that DSP Controller can save settings, if power failure it will start from last stop position, my question is that is it possible with NC Studio system?
Hello!
What kind of contents you are interested in? Share in the comments! 👇
Check out our website to discover more about Wattsan machines:
wattsan.com/?+comment&+studio+vs.+dsp+controller+%2F+wattsan+cnc
Follow us on Instagram:
instagram.com/wattsancnc/
You can contact our managers. They will answer any of your questions:
info@wattsan.com
I am currently using NC studio but would like to use DSP controller, do you have guide to help me do that
Hi, Daniel! We've got you covered. Please, check our video tutorial on how to use a DSP controller: ua-cam.com/video/8rgotkfmf1U/v-deo.html
If you're looking to buy one, please, specify your country of residence.
Nice video thanks too much.
Ça you shot a video about NC Studio Setting?
Thanks too much!
Thank you! Yes, of course we can!
Hi. I have 2 NC Studio boards from 2011/2012. Where can I get documentation on them?
Can we use a generic parallel port breakout board with NC studio?
Hello! Thanks for the question! Parallel port usually works with MACH3, NC studio have PCI board that process signals for machine. It's doesn't need a parallel port and cannot use it.
@@Wattsan
I purchased an NC studio card which came with a 15 pin breakout board. It came without documentation. My stepper drive has pins as Pulse+, Pulse -, Dir+, Dir - . I understand the Pulse - & Dir - are to be connected to ground. The 15 pin breakout board has two pins as 5v & 2 pins as G. Logically since these pin outs are coming from the pci card, one should not give the 15 pin breakout board an external 5v supply right?
Would that also mean that Pulse - & Dir - should be connected to pin marked as G on break out board?
Dear Wattsan,
You said that DSP Controller can save settings, if power failure it will start from last stop position, my question is that is it possible with NC Studio system?
Hi! Thanks for the question! No, it is not possible
@@Wattsan yes it's possible
احتاج بورد مثل هذا لتوصيل المكينة بالكمبيوتر
Hello! For control machine from PC you need to order NC Studio board, but we're recommend to use RichAuto, it's doesn't require PC to control machine.