Proper Use of Torque Wrenches & Drivers: Beam Style
Вставка
- Опубліковано 28 чер 2024
- This video covers the proper use and techniques for Park Tool's BEAM STYLE torque wrenches.
Video Content:
00:00 Intro
00:12 Set-Up
00:44 Proper Techniques
01:14 Storage & Care
More Info:
www.parktool.com/en-us/our-se...
➤ Subscribe: / parktool. .
➤ Like: / parktool
➤ Follow: / parktoolblue
➤ Fix It:
Did you know that Park Tool is the #1 resource for bicycle repair education?
• Visit our UA-cam Channel: / parktool
• Visit the Repair Help section of Parktool.com: www.parktool.com/blog/repair-h...
• Check out The Big Blue Book of Bicycle Repair: www.parktool.com/product/big-b...
➤ About Park Tool:
Since our founding in 1963, Park Tool has been the leading name in bicycle tools. Our UA-cam channel is an extension of our mission to be the ultimate resource for mechanics and riders of all skill levels. Here you will find comprehensive repair help tutorials for a wide range of components and processes, as well as troubleshooting guides, tips and tricks, and information on the latest Park Tool products. - Навчання та стиль
Beam style FTW!
Did a head on a Ford 2.3 with one and ran that thing full blast on the water with no issues.
A very important tool..
Quick too the point 👍
How do you factor in extensions?
With the 14 Nm wrench can I torque twice to tighten a 28 Nm bolt?
I think not. I remember fastener torque increases exponentially instead of in a linear fashion. (I could be wrong)
Sure. As you can use two 4mm Allen keys instead of using one 8mm hex. That’s all the same. 😁
@@matyassalata9150 😄
@@matyassalata9150 👍
😂
#askgmbntech
Big question, leading to quite some arguments over the years:
Is it ok to lube cables ?
Some say definitely, some say only with certain lubes, others say never ever because it attracts dust etc
I've had XTR cablesets that came pre-lubed with some sort of bearing grease from factory, and on the other hand a Shimano employee that told me the cables are self lubricating via the silicon inner lining....
Myself I always use a drip of oil at the adjustment screws and end caps (wiping away the excess) and feel an immediate change in resistance, and also apply a thin coat of grease on new inner cables.
I know certain solvents can damage the inner liner, so what are recommended types of lube to use, if any ?
Зачем такое говно вообще покупать.