How To Fix Sticky & Sucky Drum Brakes On A Dirt Bike!
Вставка
- Опубліковано 21 лип 2024
- aaronsenduro.com/ In today's video, I will show you how to adjust and fix sticking drum brakes, as well as showing you how to replace your drum brake pads! This applies to both the front and rear drum brakes, and to nearly all dirt bikes and motorcycles!
Find My Favourite Hand Picked Dirt Bike Parts & Accessories Here: www.amazon.ca/shop/aaronsenduro
0:00 Intro
0:33 Reasons Why It Could Be Sticking
2:02 Wheel Removal
2:18 How The Drum Works
3:47 Removing The Brake Pads
4:17 Removing The Pivot Arm
5:55 Why This Is My Sticking Issue
6:22 How I'm Going To Fix The Sticking Brakes
7:52 Re-Assembling Brake Drums
11:55 Conclusion &Adjusting Tension
Aaron's Merch: rdbl.co/3qMtEKS
My Instagram! / aaron_greenway
Business Inquiries: AaronGreenwayMFG@Gmail.com
-------------------------------------------------------------------------------------------
Kalair GFX Custom dirt bike graphics kits:
ebay.to/39Pufp1
Send Kalair GFX a DM on Instagram, tell them I sent you and you will get a discount ;)
Get Havoc Goggles! www.havocracingco.com/collect...
Dirt bike trailer hitch Carrier - amzn.to/3hn1fq6
Want to get the same first bike I bought? Check it out below:
Apollo RFZ x15 125cc Small Wheel: amzn.to/3e3Q0BI
Apollo RFZ x18 125cc BIG WHEEL:amzn.to/3eatOrp
(backup link)
amzn.to/3v1nPeA
Apollo RFZ x19 125cc HEADLIGHT & BIGWHEEL:amzn.to/3rdANDO
I May receive a commission through the affiliate links above! Thank you all for your support! - Авто та транспорт
Well that worked. The pivot shaft that spreads the pads was about seized. Works like a dream now. Thank you
Only happy to help!
so helpful and clearly explained - I am a 68yr old mother with Lyme trying to help my autistic 25 yr old son with his CG125 rear brake. I used to ride bikes , but it's a good few years ago and I need to get my head around doing these kind of jobs again.I might need to watch this a few times so it sticks in my head . . but thanks . . . good stuff.
Only happy to help! Hopefully you can get it sorted out!
@@AaronsEnduro you did the front brake though - need to transfer the ideas to the rear.
@@gilljames6485 its the same thing front or rear
Good video bud!! I currently don't have a bike with drum brakes but I'll probably be getting one soon. Now I'll know what to do!!
Yessir!! 🤘🏼 should definitely help get the brakes dialled!
Thank you!
Dude! Thank you for making this video. I searched for hours and finally came across yours. I really appreciate it!
Well thank you for watching and enjoying it!
If you want to support the channel and get even more information and cool behind the scene and 1-1 help , check this out!
ua-cam.com/channels/cviyKZ2Vf3IHFliwebzODA.htmljoin
Just subscribed, this video was a huge help. Mine didn't even turn..... I have been riding like that for months.
Only happy to help! Thanks for watching, glad its fixed!
This really helped me out! Cheers buddy!
Glad i could help! Thanks for watching!
Great video. Thank you.
Glad you enjoyed it! Thanks for watching!
Thank you for sharing 👍
Thanks for watching!
Finally i got the perfect video.... I faced the same problem bro..! Love from india
Only happy to help!!
I press my brakes and they don't move there's no slack so I need to pull the entire wheel off to fix the brake arm and adjust it down for more slack?
Great vid! I need to fix the rear brake on my e-bike, this will help a ton.
Thanks for watching!! Hopefully get your bike up and riding in no time!
Thanks mate 👌👍
No problem mate 👌🏼
I just changed the brake shoes of my bikes rear brake and suddenly its way too tight and also sticky, i tried changing the inside springs, but its still the same. Any idea on how to fix it?
The brakes are probably adjusted for the worn out brake pads
Finally, someone who speaks English.
Glad i could help!
excellently resented
Thanks for watching!
Nice!
Indeed!
Hey! I have almost the same problem with my bike (crf 100f) i pull the front brake,nothing wrong,but the then the spring cant push it back,so it sucks
Need more tension from the spring
@@AaronsEnduro how do I add more tension??
Adjust the arm on the spline shaft
@@AaronsEnduro I just got this bike it was fine I was adjusting where the brake was on the bars but then that happened so where whould I adjust it from thanks
Thanks
Np! Hope it helped ya!
What would be the cause of the rear drum break locking up. When i ride even around 40km/h and I push the rear brake it locks ups
Sounds like the drum separator is over rotating and binding up when you apply the brakes
@@AaronsEnduro what would be the best way to fix this
Checking that your pads aren’t completely worn out, and or that the adjuster is adjusted correctly
I replaced the pads and the problem is solved. Thank you
Fantastic! Happy to hear!
I have a crf 70 and I took the brakes apart cleaned and sanded the pivot arm inside the hub. Still not great. I noticed your has a spring at the end of the cable and mine doesn’t not. Am I suppose to have a return spring? I have them on the shoes just not on the cable
Is your brake lever not returning at all ?
From my knowledge, yes it needs the spring at the bottom of the cable
Lever and brake pivot arm will not return. Wondering if the cable is to blame
Oh , ya you’re missing the spring buddy
@@AaronsEnduro it operates smoothly with cable disconnected from the brake pivot arm. I’m seeing videos of 70s without the spring but there’s a spring that I found on eBay that is a legit oem spring for 70s. I did buy this used.
That was very informal thank you
only happy to help!
Now where do you suggest to buy parts from ? I think I need a new cable
But can’t find part on Amazon
Depends on what bike
@@AaronsEnduro it’s a 2000 model xr70r
What country u in
so the back ones are the same thing because my back break works but barely
Same idea! Id also check your pads to see if they have any pad left !
@@AaronsEnduro thank you i will
THANKKK YOUU MAAAAAAANN ffs now i can wheelie without looping my shit
Only happy to help!
I need cables like those but don't know where to get them
Drum brake cables?
🤘
🙌🏼
@@AaronsEnduro ✌️your a Rockstar bro!
You’re a great viewer bro!!
Thanks for the vid/ could not have been butter
Only happy to help! I appreciate you watching!
The arrow is to let you know if the shoes are to worn out
The "barrel" is called a cam
To be Frank ...
Your too Frank and no cuts and edits,when you missed a bolt or nut your like I missed it and let me do it again.
I like your frankness... 🙏
Frank runs in the family
@@AaronsEnduro don't let him run too far 😂
Thanks for watching and supporting!
Splines not 'gears'.
Shoes not 'pads'.