Thanks for posting. I went on 200+ mi. ride last weekend on my fz07 and I noticed how much better my friend's seat was on his fz07 with an aftermarket seat. I think I'm gonna try doing this because my butt was hurting after that ride.
very nice. I'm wondering if you could reshape the seat slightly and still have a nice fitting cover. I want to create a slight "back" on my boulevard m50 seat so I sit about 3/4" lower.
gargoylefun . it probably won't look that good, but all you can do is try. don't be afraid of failure, you can always take it apart again. do what you can to make it yours. good luck.
I did this on my Sport Standard, because I also do a lot of riding with cruiser friends and Charity Rides, and, because of some physical injuries, I don't do the full "Track Day" style of hanging off and knee-dragging...so I mainly stay 'planted' in the regular riding position. But I used new alcantara material to re-cover the seat. I did very little cutting or re-shaping, except to slightly widen the seat across the middle and rear while keeping the front fairly narrow. I didn't really 'want' the added seat height, but it was unavoidable to get the needed cushioning. I also did a similar mod to the pillion, so a passenger would be more comfortable. The new material looks GREAT, and was pliable enough to get it pulled tight with no wrinkles. And it is a LOT more comfortable!
can i just ask you why do they give foam to put it on the topside of the gel?? what would happen if i dont have the foam and just put the coverseat over the gel? because am from belgium and i cant translate the word foam i dont understand what it is and what for
Just cause I’m a creep starter how come you didn’t do the rear seat so your helper/wife had gel to LOL!! Great job hoping to try this with my Harley seat
Jon Hill , ive done 3000 miles on it, and so far it feels pretty good. I have always wanted to try a mustang seat but don't want the 600 dollar expense. it was a good project and I will continue to use it.
don't waste your money on mustang seats honestly I have a mustang wide touring o my vtx 1300 and for the first time rode 300 miles and my bum feels like I got paddled by my elementary school principal
The foam that they gave you is suppose to wrap around the seats sides. It's called a smoothing foam. Anyone can see where you cut to deep and didn't wrap the foam all the way around. Not a bad job but not a good job, I've redone 3 of my seats you should have gotten the memory foam with it, it makes a big difference.
UA-cam tip: Don't ever talk about what you will do. Just do it. If you are using future tense, you are doing something wrong 90% of the time. Get a tripod, get to work, and talk as you work.
Built not bought! I'm not sure exactly why someone would critique a guy for sharing his way of making a modification... I looked at your videos, and didn't see any How-To's.... Nut up or shut up!
That's genius Bryan. Can't wait to have a go at doing it - thanks for sharing this great idea.
it's easier to shape seat foam if you throw it in the freezer overnight
Most helpful comment I have ever read on UA-cam!
Or you can easily cut and shape foam with an electric carving knife with a bit of silicone spray. (Or without it).
Thanks for posting. I went on 200+ mi. ride last weekend on my fz07 and I noticed how much better my friend's seat was on his fz07 with an aftermarket seat. I think I'm gonna try doing this because my butt was hurting after that ride.
Where did you buy your gel pad please ?
Why can’t you put it extra on top??
Brilliant video, nice to see a Shadow Seat being used. i can now follow this for my conversion, thanks
very nice. I'm wondering if you could reshape the seat slightly and still have a nice fitting cover. I want to create a slight "back" on my boulevard m50 seat so I sit about 3/4" lower.
is it okay to not cut into the foam and just shape the gel and put on top of foam? I need to raise my position up a bit anyway.
gargoylefun . it probably won't look that good, but all you can do is try. don't be afraid of failure, you can always take it apart again. do what you can to make it yours. good luck.
I did this on my Sport Standard, because I also do a lot of riding with cruiser friends and Charity Rides, and, because of some physical injuries, I don't do the full "Track Day" style of hanging off and knee-dragging...so I mainly stay 'planted' in the regular riding position.
But I used new alcantara material to re-cover the seat. I did very little cutting or re-shaping, except to slightly widen the seat across the middle and rear while keeping the front fairly narrow. I didn't really 'want' the added seat height, but it was unavoidable to get the needed cushioning. I also did a similar mod to the pillion, so a passenger would be more comfortable. The new material looks GREAT, and was pliable enough to get it pulled tight with no wrinkles. And it is a LOT more comfortable!
you would need to replace the leather, as you need more of it. did you do it?
can i just ask you why do they give foam to put it on the topside of the gel?? what would happen if i dont have the foam and just put the coverseat over the gel? because am from belgium and i cant translate the word foam i dont understand what it is and what for
it helps hide the line you've cut into the foam to place the gel. don't use it if you dont want.
spons schuim, Schaumgummi, caoutchouc m mousse
Amazing job done!. I was looking for exactly something like this but didn't know how and where to start.
how many manufacturers &suppliers of gold gel pad . Please send him address. Thanks for this video.
Where did you get the gel? And how much was it ?
Aldo x Loco , i think i got it from Amazon for 60.00.
Thank you
Just cause I’m a creep starter how come you didn’t do the rear seat so your helper/wife had gel to LOL!! Great job hoping to try this with my Harley seat
I usually ride solo, my wife rides her own.
Sir where did you get that nice Gel?
Gino Hernandez at Amazon.com
we can supply the gel
Nice job, where did you get the gel, I like the idea and I am going to do the same for my daughters bike
hey you start making more videos
Hi Bryan. After 3 years, can you share your opinion ? It is still confortable ?
Absolutely. Still looks as good as the day I did it.
@@bryanjones3996 ty
After the Gel Pad did you notice any huge difference in riding the motorcycle ? Is it worth it, please share your experience.
It's a lot better than is was. I can put in a good days ride now. I couldn't before.
hello,men.Where i can buy this gel sheets?please.I only see one in ebay,thank you.
mandragor1967 amazon.com i think is where i got mine.
OK,THANKS
My father invented these, they’re called the Phantom Pad
i wish i hade an grandpa like you so you could do it for me :) just wonderfull
Kind words friend, thank you.
been awhile since you have done this....would you say it was worth it? can you comment its effectiveness? thanks
Jon Hill , ive done 3000 miles on it, and so far it feels pretty good. I have always wanted to try a mustang seat but don't want the 600 dollar expense. it was a good project and I will continue to use it.
don't waste your money on mustang seats honestly I have a mustang wide touring o my vtx 1300 and for the first time rode 300 miles and my bum feels like I got paddled by my elementary school principal
Mustang seat costs more than many recliners! What’s up with that? They’re doing something else with bikers butts than just a seat! 😂👍🏻
The foam that they gave you is suppose to wrap around the seats sides. It's called a smoothing foam. Anyone can see where you cut to deep and didn't wrap the foam all the way around. Not a bad job but not a good job, I've redone 3 of my seats you should have gotten the memory foam with it, it makes a big difference.
Thanks!
Where did you boight the gel pad? Thanx!!
MoTo VRUMM I bought it from Amazon
we can supply the gel, cheaper than Amazon
Nice job looks good
ELECTRIC CARVING KNIFE WORKS GREAT,,
Southpawsgarage what a brilliant idea.
this is awesome
You took a little too much foam off the seat in my opinion.
we can supply the gel.
BQ Derek email address id love to try some
nice video
nice job
UA-cam tip: Don't ever talk about what you will do. Just do it. If you are using future tense, you are doing something wrong 90% of the time. Get a tripod, get to work, and talk as you work.
тот самый случай, когда руки их жопы растут.
THIS IS A VIDEO OF HOW NOOOOT TO DO THIS, HAHAHAHAHAHAH
Don't really care. Seat still looks good and rides good after all these years.HAHAHAHAHA.
Built not bought! I'm not sure exactly why someone would critique a guy for sharing his way of making a modification... I looked at your videos, and didn't see any How-To's.... Nut up or shut up!
@@cowboyassass1n he did an awful job there, sorry
Wrooooooooooooong
So I take it you didn't really listen. This was the first time . I still have this bike and it's doing fine. So I guess fuck you is my response.