So did you uninstall the driver first and then reinstalled it? I have a Rtx 3070. And I used DDU to uninstall the driver, then I reinstalled everything and code 43 is still here. It is also giving me horizontal green lines on my screen and blackscreen after every driver installation (update) from GeForce Experience. For the reinstallation of the driver, did you reinstalled a different (older) version of the driver?
As you have green line on screen reinstall drivers or new BIOS will definitely not help first apply warranty as I think your card is probably still in warranty and if not I will recommend reheating GPU like I do in video that should help
@@frogtechtips I am not comfortable (professional) enough to heat the gpu. I guess I will do the warranty route and see if I can get a replacement. Thank you!!!!
Amazing! I got the code 43 on my GeForce GTX 770 and tried all the other solutions. Nothing worked except this. The flux, heatgun and new thermal paste worked beautifully! Thank you so much! 😁👍
Hello I have acer aspire 5750 and NVIDIA GT540M is my graphics card . it is showing me code 43 and I tried every thing however the problem not solve . please help me .
My word I cant believe this. I have spent hours and hours trying to fix a special USB dongle with this same error. I didnt think it could be a hardware fault but after watching this and reading all the comments about how the reflow worked i thought let me just check the device with an eye glass and sure enough I found the D+ pin on the USB connected was not making contact (bad solder job). I resoldered it and sure working well now. Thank you so much.
I have 4 AMD Radeon VII's. It posts and fans run, but get a code 43 error. Do you think this will work in my case? I have tried flashing VBIOS's already and nothing works. Booted them in HIVEOS (Linux OS) and it posts, but gives an error that says waiting to cool down, so I'm curious if the thermal paste is insufficient and unsoldered the chip.
This worked on my asus geforce 760GTX , I used a 2500W strong hair dryer turned all the way upto max heat and reheated for 6 mins ( without flux ) I used isopropyl alcohol to clean up both sides and booom It worked like a charm , Thanks to FROG I can play games smoothly again after a long time 🙏.. (It's been a week now and it sill works!)
@@frogtechtips yes but no luck... It only giving me blackscreen.. i still have the card but did not try anything much since i got myself a new graphics card
Hello it was like 5 month ago when i bought my gtx 760 from Aliexpress when i plugged gpu in pc it had locked 800x600 resolution, lines on screen and it was so slow in games and apps.I have tried everything in pc but nothing on gpu itself except cleaning it.I don't have that heat tools and that liquid that you pour in gpu. Also I plugged gpu in tv cos my monitor does not have hdmi it only has vga not even dvi thank you.
I’ve been using my pc without a graphics card because it broke. It has screen tearing and the code 43 error. Then I saw this video. It fixed my rtx 2080ti. Thank you soo much bro. You deserve a sub.
@@jano8862 I will just try again but this time with little bigger temperature and longer time to heat up as well and after I will undercloock GPU about 5% you will loose little FPS in game but your card will have less stress when you use and this can help. Best ways to undercloock GPU is flash BIOS with new under clock value or second opinion is used afterburner I hope that will help
Hi heat gun is best way as you will heating just part you need with oven you will heat everything I will not recommend but is up to your choice oven method can works as well just don'tn use fan and remove all plastic parts as can Melted
Like I write I don't recommend do that on oven but if you want to try set up max temperature is possible and keep there like 10 to 15 min on preheat oven and once you switch off Keep card inside till fully cool down
bro i have the same problem with my msi gtx 760 i was playing league and at sudden it kicked me out and the screen started glitching I restarted the pc but after this code appeared I tried many times to install the driver but it’s not working help please
Hello! Can you tell me what it is in that syringe. It is necessary to use it? Thank you. I have the same problem with a GTX 560. I hope that will be useful. I ve tried everything. Thank you.
Hey Frog, You should put affiliate links to type of flux/brand you used, heat gun etc. I’m sure everyone will use ur link. Anyways my question is just that, which flux did you use for this Thank you
Hi you can have a look on description on this video's there is many links ua-cam.com/video/hhVQjffkLts/v-deo.html But ye I will update description in this video as well later I forgot to do it :-)
I have a Radeon VII with error code 43. Fans and LED starts, but I get no picture signal. I heard that an Error Code is NOT able to be repaired at Radeons VII. Is that true?
No picture either means bad drivers or that the card is broken. If it's not because of drivers then throw it in the oven for 10 minutes at 200c and it might start working again
Hi just want to thank you for this it saves me a money, i opened the GPU clean with laquer , clean the dry thermal paste put some flux and reheat with hot air 10 to 15mins, then clean the board dry and rethermal and it works the artifacts gone before when i enter heaven benchmark the artifacts shows right away but now i can complete the whole stress test and its working. Thank you so much ! subscribe
Hi Frog, I'm looking to try this on an AMD Radeon RX580 8GB card which has an error code 43. Can you tell me how long you did the reflow heating in your video?
@@simonng1806 did you heat VRam as well if that doesn't help is time to buy new GPU goop point is now is GPU Very cheap RX 580 8gb you can buy about 60 to 80 Euro now
Hii mate i have msi laptop gp65 leopard sek and my RTX 2060 is giving error 43....i tried reinstalling the windows, drivers, flashing the vbios everything i found on the internet even i tried to heat it with dryer but like 30-35 seconds......can u please guide what should i do like even if this is repairable or not....my laptop is fully working on intel graphics (UHD)....PLEASE GUIDE ME!.....HISTORY: i started the laptop normally and started valorant while i idle on the main menu some drviers error came had to hard restart then the gpu never stopped working...PLEASE DO REPLY!!
Hi on laptop is always hard repair something like this and if you want try reheat you need to do abou 7 to 10.min.under 300 Celsius. But on laptop is so risky as there is to many components near that GPU Sorry for Bad news
my rtx 2060 mobile, no error 43, and detect by laptop, but always instanly shutdown when gpu under load 2%, gpu z show rtx on idle consume 15-25watt, before vrm shorted and was replace with new one, may i know what the problem is?
Moje karta gt740m se ukazuje a dokonce když preinstaluju windows tak 3-4 dny funguje bez problémů na plnou zátěž. Pak se notebook restartuje a nepomůže nic. Jen reinstalace. BIOS update nemůžu udělat protože můj notebook nemá baterku, nafoukla se a vyhodila. Ale prej je na to potřeba. Nějaké rady prosím? Možná se nakonec pustím do toho reflow, už jsem to párkrát dělal. Notebook jsem koupil před týdnem a nevěděl jsem o této závadě dell vostro 5470.
@@frogtechtips Když komplet přeinstaluju ovladače a nainstaluju starší tak ukazuje všechno OK ale neukazuje se mi nvidia control panel a není ani v správci úloh. Po restartu se občas vrátí code 43 ale ovladač zůstane stejný, ten se kterým to dřív fungovalo. už fakt nevim co s tím.
@@skyes9461 tak to fakt netuším nestretol som sa s takýmto priebehom no môžeš skúsiť reheating GPU ale keďže je to laptop davaj pozor na ostatné komponenty
@@frogtechtips Hele pohrál jsem si trošku v registru a zatím to funguje ale zas nemůžu do správce úloh. jak tam vlezu tak mam blue screen. ale když to bude fungovat tak jsem s tím v pohodě. :D
@@frogtechtips one more question, my gtx titan x has die chip off on the top left and right = little but it has rainbow lines on boot but it gives code 43 after login, is that ok or is it dead, btw how long to heat up the die and how long to cool it with the heat gun
@@TristanCookr ok you can try reheat GPU I think can help and there is nothing to loose or jus buy another used good GPU on this Day is extremely cheap
Hi, i got a laptop Lenovo Legion y520 GTX1050 and i woke up in the morning one day and my GPU just actually died somehow...I get error code 43 on device manager and i have done every repair thing that i could do, reinstalled everything, DDU, windows many times, same problem...Is there a solution to it on laptop? If i open it up, change the termal paste, etc? Could be this or just get a hole new motherboard at this point...The curious case is that it died while nothing was happening, it was off. I just woke up and it was like this, while the other night i played and used t just fine...Thanks a lot.
@@generalthrones like on video if it's not clear one this one look on my channel there is more videos about this problem and how to solve But ye first step is clean GPU
after updating mine my screen goes black when clicking start menu then if I shut down or restart my pc it goes error again even i already uodated it before shutting down
@@frogtechtips i cant evem shut it down because it goes black screen again and again. i cleaned my fan before and i remove some parts does the screws are reason to this also
@@Kuya_Dude not sure man but definitely something going wrong and if you tried all other solutions and card is out of warranty I will try reheating that should help
Did all you said, My GTX 760 now works properly. Its a very old card. Once fixed i saw a lines throughout my PC. I have installed latest drivers and the resolution is 1080p. Looking good so far. GPU z, cpu z, msi afterburner and everything shows card specs now. Lets see how long it works.
@@SpiritedIn-ux2cr nič good work and ye is old card nothing to loose if you try this method btw I hope you are click subscribe and if you can recommend my channel to your friends as thanks:-)
Still didn't work for me. Not sure what the problem is with my Evga geforce 2080 TI but it sucks, error code 43 is still on and the videocard itself heats when it runs. :/
I have the same code 43 but my gpu works in the lower pci slot. The top pci express 16 slot won’t run any of the two GPUs I tried. Gives me red lines through the monitor :/
I have a asus 2070 strix, i checked my graphics card but i keep getting error code 43, also im seeing lines going across my screen. Any help on getting rid of those lines?
As you have a line on screen is definitely GPU die problems I will recommend apply warranty but if your card is out of warranty I will try reheating GPU like I do in video nothing to lose anyway
I get rx470 problem no signal no detect picture but if use gpu onboard it can see card in device manager and have yellow code 43 if use this tip it can fix problem?
@@frogtechtips I'm not sure it was a gtx 1080 someone was selling saying it had an error 43 code and it had been cleaned and repasted but didn't say anything about heating but it is still showing the code so I came looking to see how to fix it
@@CresuZClips ok than open card look for PCB and check for missing parts or physical damage on it if card looks good than try reheating GPU that should help
i have 1650 super asus phoinex and i have same issue but sometimes everything great and sometimes it shows up error code 43 if i clean the gpu and replace thermal paste it would be fine ?
Thank you man this fixed my rtx 2080ti. I was playing gears 5 and pressed alt tab to go online and minimize the game but when I switched back an hour later the screen just went blue and after that I was getting error 43 and couldn't install drivers. I followed your steps last night and just slotted my card back in and reinstalled drivers and it's working perfectly.
Another testimonial that this could work.. Bought a broken ASUS GTX 970, 4GB of DDR5. It had Error 43. I sat it on a baking pan and used a heat gun.. I could not find the right type of flux, so I didn't use any. (don't use plumbers flux, because it is conductive and will short out your components.) I followed your heating instructions. Initially I tried it and it seemed to be worse, so I set it aside.. I thought I had gotten it too hot..oh well.. Today I tried it again and after reloading the driver, it's working fine! A long term test is in order though.. Thanks Much!!
@@frogtechtips Just bought 2 "bad" Gigabyte AMD Radeon HD 7950 3GB GDDR5 GPU's for $25.00. One was completely dead, the second had a wide blue vertical line through it and was not recognized by Windows. Heat gunned the second one. Boom! back in operation. Heat gunned the first one... Boom ! back in operation. But when I compared their performance, the first one had lower score. Took it apart and heated it again. Now both GPU's perform equally. So out of four cards I had, I got three of them working. I could have never have afforded to buy these GPU's.
@@doorguru168888 so good job you done IAM really happy my videos help you I hope you Also not forget click subscribe and if you can please recommend my channel to your friends as well :-)
I got the error last week and most of the time I just manually uninstall it on device manager and after restarting it, It fixes itself up. But then it happened again recently and when I try the same method. It doesn't fix itself now
I bought a GTX 750 Ti from a guy, he did not inform me about the artifacts and he did not inform me about an inept attempt to change the bios to the GTX 760 ...
That's strange I will send this GPU back to him if possible and try get money back If not trying reflashing bios to correct one and maybe this will be help
Hi not every card can be repaired with this method your card have probably some different foult as well bad New for you is you will need new card probably
Hi Frog. I'm currently getting a issue with my asus flowX13 gpu. At some point, Im not sure when, the gpu (3050Ti Labtop) stopped working and windows task manager stopped detecting it as well. I went into device manager and it says the gpu has an error 43 - I checked online and tried all the solutions they offered (reinstalling drivers, safemode, etc). Right now its using the default AMD radeon graphics. I checked the asus armoury crate as well and it states that the GPU is in extreme powering saving mode and I can't get it out of it. (its not on IGPU mode). Thanks!
Hi on laptop is always hard fix problems like this and as you try all other solutions and if your laptop is out of warranty you can try reheating GPU but on laptop is so hard as you need take off all of the parts
@@KT-yl9wc If you have your warrentee, I'd definitely suggest you to do an asus return, I ended up sending it back twice because the first time they just updated my software and called it a day. I sent it back the second time and they ended up replacing my motherboard as well.
THIS. FUCKING. WORKED. I dont know how and i dont know for how long, but this actually worked. i did it with absolutly no hope (and no flux) and stoped short before 10 minutes when i heard a pop comming from the board. still assembled it, still conected it, and... here we are!
Hi, my friend I need a photo for that video card to compare with my gpu to check resistors, how many resistors uses that card, I think in my card lost any resistors or Where I can find gpu diagram? Thanks in Advanced
Hello frog I actually having the same problem but my Video card is running in low end like 600x400 something if I do that method can it fix it? Do I have to do it with the heat gun and with the fluid in corners I have gtx 1050 4gb ti
Hi is always hard to say if this method will help you but I always say if you try all other solutions and your card is out of warranty there is nothing to lose anyway
@@frogtechtips hi frog my gpu is good for now but when i played valorant they keep crashing and having a garbage display on it i tried to update the driver and uninstall it what should i do
What did you try btw 1030 is so cheap this day if reheat doesn't work just buy new better card if you not trying reheat just try there is nothing to loose anyway
It worked in my GTX 970! I cleaned the thermal paste, used a lot of IPA 99%, let it dry then used the heat gun. Reinstalled the drivers and voilà! Thank you!
Hello frog... Sir. i did this EXACTLY! to a 2080 ti FE... and now my gpu is totally bricked. NO post, fans are on 100%. the rtx nvidia logo inactive. i inspected my card it has no burn marks or any missing components. whats going!??? i totally regret doing this on a RTX card. any advise is appriciated.
Always hard to say from my experience some card is live even 5 years after repair like this and some can die after 1 h :-) card in this video working still today
sir please help me in my gtx 560 i had the same problem but in gpu z it shows gpu memory is 0 mb and gpu clock is 0 mhz and have flickering dim display
I try flash the stock bios and still wont work, this is my first gpu in my entire life since i have my computer last 2019 hope i can fix it cause i need it for my animation class🥺
Hey man, im really having a hard time figuring out what to do with mine. Same GPU (gtx760) but it's twin frozr. I did all the software thing to get the error 43 out but still there. My last resort will be this and I'm too scared to open it because of lack of experience and Don't have the liquid to reflow nor the heat gun. What do i do? Hope you see this.
Hi if you tried everything else and as your GPU is so old and out of warranty anyway just do what I do in video and that's should be help you can buy cheap heat gun and flux on eBay
Ohh i meant oven, or maybe a blower but is it hot enough. Trying to find alternatives in our house. Thanks for responding tho, really appreciate it and I'll sub cause of that.
I have an issue with an GTX 1060 6gb GPU (Inno 3d Compact X1) that can't run a mats to test it, also has the error 43 and gpu-z shows everything good except ram (0mb), bus and bandwidth. This is a memory corruption issue I guess but I don't know if it is one of the memory chips, memory controller or anything else :( 3
Hi memory module is usually problems I will definitely try reheating memory modul all of them if your card is out of warranty there is nothing to lose anyway and I think will help
Hi I can try fix your card just send me mail or if you will following all steps from video you can do it yourself is easy but if your card is in warranty go that way first
@@ehgawshee1 all other contact is on description just have a look but IAM from Slovakia with is probably not cheap send card to me I will recommend you find a local technician
my gpu amd rx 570 also gets code 43 sometimes and gives no display(i checked with second monitor connected to igpu) on boot but other times it boots up fine and gives display with no problems even on 100 percent load. Could these steps fix my gpu too? I tried it in many different systems and it gives same problem
i have rx 580 sapphire nitro 8gb. and had an error 43 just like ur video. If i do like what u did in this video. will it be fixed? i ady use atipatcher just like others told me. but it still the same. gpu clock and memory clock 0. should i try this?
@@28cxi that's mean just buy new card man is completely dead and you will need probably replaced Vram module but that's is more expensive than new card
@@frogtechtips CS-FLUX Low viscosity Halogen-free liquid flux BGA rework reflow reballing 5g will this get the job done ? also thank you very much for all the help :)
Hey Frog. I got a GTX 1660 Gaming ES Colorful that has Error 43 in it. Will it still work using this method despite having different cards you have used?
Thanks, you saved my gtx770 and my day! I actually don't have a heat gun but i have a strong hair dryer (2500w) so i used it on max heat slow fan for 10 mins and it worked. Maybe it was just the old thermal paste that had to be cleaned up and the hair dryer thing was useless but anyway i have my gpu back and I'm happy. Wish you the best.
Help me frog my laptop has an amd radeon 535 gpu it suddenly stopped showing on the device manager i tried everything and no hope but after a minth later it fixed it self and showing up on the device manager but with an exclamation mark on properties it says code 43 i did everything even formatting the pc and reinstall windows non of them fixed my prob😭
please i really need a fast reply , someone is seeling on ebay his 2080 ti , he's a dad not really in computer , and got the problem he bought another 1 and he's selling this one for 200€ , i'm just asking myself if it's worth trying and buy it ( with the error 43 ) please reply
And don't forget you can still selling that card again on eBay if not working with the same description iam just not sure 200 EUR for broken but is ti version with for 200 is probably ok
@@frogtechtips thanks for your reply , if the card is broken there are other sign than just error 43 , if the card isn't broken and just have the error 43 than it's repairable pretty easily from what i saw on internet , how cqn i know if the card is dead ?'
@@entouaneee5328 you right usually error 43 is easy repair if you know what you doing:-) if card don't have any physical damage is probably repair possible
I have the same error, I tried reinstalling the original bios and patched but nothing, can I send you mine? I can pay you if you want because I’m desperate
thank u so much it really worked .i just used hair dryer for about 7 minutes and new thermal paste i just had to reinstall the driver from device manger and done
Hello, I have a problem, if you can help me, I don't know what version of drivers I need for a video card or give me a link where I can download it, my video card is Msi GeForce gtx 760, my card is
Hello, I have a video card, there is an ISI gtx 760 thread, but I don't know, what version of drivers are compatible with the video card? Send me a link to the drivers version? !!!
Ok my friend has some RMA 218 is why I was asking just incase i need to buy the correct kind. I dont want to accidentally use any that may have metal if it's not supposed to have it. The link in description showed AMTECH NC-559-ASM No-Clean Tacky Gel Solder Flux. Is this the kind that you used?
@@Holy-Hand-Grenade-of-Antioch you right any flux without metal in is good I prefer gel one but Also liquid one is good as well and the 9ne is description is definitely good as well
it work on my rx 580 = 5 minutes heat gun 1500 low settings without flux gel = i got a signal for 2 minutes but i lost signal again, so i ordered the flux gel and i will try again lol
Máš to i česky? Edit: brácho poraď pls, mám tady rx 470 8gb od xfx, šťáva do ní jde, gpuz hlásí 8192MB RAM, vidí i GPU samotný, jenom nevidím pixel fillrate, texel fillrate a propustnost paměti.. Na 3.3V railu je nějaký zkrat, je tam minimum odpor asi 0.2ohmu. Na kartě se nic nehřeje, resp. nepálí.. GPU se zahřívá, po cca minutě od zapnutí je horké, musí se vypnout pc takže tam šťáva jde.. poraď pls
Zdravím ťa nie nemám to no rád skúsim poradiť išla ti ta grafika predtým normálne. Ak by tam bol skrat tak Pc by nešlo zapnúť takže tam bude iná chýba Vieš aj históriu tej karty
@@frogtechtips kartu jsem už takto koupil, teď řeším na fórech.. btw zkrat tam není, mine fault, jel jsem 4pin zleva ale to je země, 3.3V je 4.pin zprava, tam je reading ok, cca 2K ohmů
@@paveljelinek772 tak v prvom rade by som skontroloval kartu či náhodou nieje aj fyzicky poškodená a keď by bolo všetko ok asi by som najprv skúsil nahriat chip a pamäte keďže aj podľa merania vyzerá že karta je ok
@@frogtechtips no právě, fyzicky vyzerá naprosto vpohodě, asi taky pošlu do servisu.. teď jsem jim posílal 480 8gb od gigabytu, no detect... Na grafice byl myslím zkrat na 3.3V railu, konkrétně na zadní straně jeden ARM čip, nějakej holtek.. a pod proudem úplně hořel takže ho vymění (novej stojí cca 80kč) takže paráda.. a tam se pod šťávou ani ramky, ani gpu, ani mosfety nezahřály takže jsou ok..
After doing all this and installing gpu into pc, my pc now cant detect gpu gtx 760 and uses integrated graphics card, tried to remove and install again but it doesnt help.. pls help
I cant install drivers, it says my system is not supported, In device manager no such NVIDIA exists, my pc doesnt see the GPU.. on GPU green light is on, fans are working
@@frogtechtips thanks for answer, I checked BIOS but I cant find anything related to GPU, I plugged power cable, FAN is spinning and green light is on chip is blinking. I tried to install same 760 on other pc and problem still exists. I cant get any video data from card to monitor. What else would you suggest?
@@PlanesAndCoffee000 that's mean you have 2 card and both have same problem if yes for me sounds like you MB foult or really BIOS setup look on something like with GPU is preferred there definitely must by something on BIOS and also if you can try that card on different pc
@@frogtechtips sorry, maybe my answer was unclear but I installed reheated GTX in other PC to check if problem is still exists and other PC couldnt detect gpu too! This means I damaged gpu or something during reheating :(
its now the 4th time my gtx 1660 had this error code the first 3 times it "fixed itself" after a few days, but now i have the problem for 3 weeks.. I'll try this to fix it. Does someone have other advice?
I got that error43 issue on my palit jetstream 2060 super. Before going on to the windows , the small pink lines appear on the screen and when it comes to windows , the resolution is too low. And I tried to reinstall the drivers and it showed driver installed successfully but nothings has changed. Would it be okay trying the method of reheating? I still need to try on reinstalling windows method.
So did you uninstall the driver first and then reinstalled it? I have a Rtx 3070. And I used DDU to uninstall the driver, then I reinstalled everything and code 43 is still here. It is also giving me horizontal green lines on my screen and blackscreen after every driver installation (update) from GeForce Experience. For the reinstallation of the driver, did you reinstalled a different (older) version of the driver?
As you have green line on screen reinstall drivers or new BIOS will definitely not help first apply warranty as I think your card is probably still in warranty and if not I will recommend reheating GPU like I do in video that should help
@@frogtechtips I am not comfortable (professional) enough to heat the gpu. I guess I will do the warranty route and see if I can get a replacement. Thank you!!!!
@@jxyeee6525 if your card is in warranty definitely go that way you should get a new card
@@jxyeee6525 I got the same problem
@@RainbowX ahh sorry to hear about it. My card was in warranty and I just sent it back to the prebuilt company for a new one.
Amazing! I got the code 43 on my GeForce GTX 770 and tried all the other solutions. Nothing worked except this. The flux, heatgun and new thermal paste worked beautifully! Thank you so much! 😁👍
You welcome and I hope you are click subscribe:-)
Hello I have acer aspire 5750 and NVIDIA GT540M is my graphics card . it is showing me code 43 and I tried every thing however the problem not solve . please help me .
Hi you can still try reheating but on laptop is so hard but is not impossible
@@frogtechtips you mean reheating the card ?
@@yousefff9174 hi yes
My word I cant believe this. I have spent hours and hours trying to fix a special USB dongle with this same error. I didnt think it could be a hardware fault but after watching this and reading all the comments about how the reflow worked i thought let me just check the device with an eye glass and sure enough I found the D+ pin on the USB connected was not making contact (bad solder job). I resoldered it and sure working well now. Thank you so much.
You welcome and I hope you are click subscribe as well
I have 4 AMD Radeon VII's. It posts and fans run, but get a code 43 error. Do you think this will work in my case? I have tried flashing VBIOS's already and nothing works.
Booted them in HIVEOS (Linux OS) and it posts, but gives an error that says waiting to cool down, so I'm curious if the thermal paste is insufficient and unsoldered the chip.
Hi I think if you will following this steps you will repair your card
Any updates?
This is 100% working to my GTX 760.Thank you very much..
You welcome and iam happy I help you
This worked on my asus geforce 760GTX , I used a 2500W strong hair dryer turned all the way upto max heat and reheated for 6 mins ( without flux ) I used isopropyl alcohol to clean up both sides and booom It worked like a charm , Thanks to FROG I can play games smoothly again after a long time 🙏.. (It's been a week now and it sill works!)
Nice and good job I hope you can share my channel between your friends :-)
update?
@@keed23 Started giving constant blackscreen after using for 2 months..
Did you try reheating again but I will recommend use heat gun This time
@@frogtechtips yes but no luck... It only giving me blackscreen.. i still have the card but did not try anything much since i got myself a new graphics card
Hello
it was like 5 month ago when i bought my gtx 760 from Aliexpress when i plugged gpu in pc it had locked 800x600 resolution, lines on screen and it was so slow in games and apps.I have tried everything in pc but nothing on gpu itself except cleaning it.I don't have that heat tools and that liquid that you pour in gpu. Also I plugged gpu in tv cos my monitor does not have hdmi it only has vga not even dvi thank you.
Hi if you bought 6m Ago card must be in the warranty
@@frogtechtips i asked and they said it was more than 6month ago ):
@@lolokula_gaming9403 hi is must give you 12m warranty
I’ve been using my pc without a graphics card because it broke. It has screen tearing and the code 43 error. Then I saw this video. It fixed my rtx 2080ti. Thank you soo much bro. You deserve a sub.
IAM happy for you and I hope you can share my channel between your friends as well
@@frogtechtips Will do for sure :D
Hello frog, unfortunately it broke again. Screen tearing is back and error code 43. Do i do it again or shall i try another fix
@@jano8862 I will just try again but this time with little bigger temperature and longer time to heat up as well and after I will undercloock GPU about 5% you will loose little FPS in game but your card will have less stress when you use and this can help. Best ways to undercloock GPU is flash BIOS with new under clock value or second opinion is used afterburner I hope that will help
@@frogtechtips thank you so much for the help. I will try that when i get home.
Whats the name of the tools and items you used to fix the card?
Ive got a 980ti error 43 seems like i need to do this to mine
All you need is heat gun, flux, thermal and screwdriver
did it worked for you?
@@korhan9089 yop i hope he will let me know as well
@@frogtechtips
👍
did it work ??
I've tried doing this on my acer predator :( gpu still dead do you think I should try heating the vram modules too?
Definitely yes and maybe you can try reheating GPU with higher temperatures as well there is nothing to lose anyway
Hello, is it necessary to use a heat gun or are there more ways like an oven?
Hi heat gun is best way as you will heating just part you need with oven you will heat everything I will not recommend but is up to your choice oven method can works as well just don'tn use fan and remove all plastic parts as can Melted
@@frogtechtips What temprature and how long it shod be in oven? Thanks for answering
Like I write I don't recommend do that on oven but if you want to try set up max temperature is possible and keep there like 10 to 15 min on preheat oven and once you switch off Keep card inside till fully cool down
bro i have the same problem with my msi gtx 760 i was playing league and at sudden it kicked me out and the screen started glitching I restarted the pc but after this code appeared I tried many times to install the driver but it’s not working help please
Hi you will need do repair like I do in video you GPU is dead iam sure
What is the flux you used? G23 paste or liquid based...
Hi any gel flux is good and liquid should be fine as well
Hello frog, i had this situation too but on my laptop. Have you try this method on laptop? Thanks
Hi yes I tried but is more complicated as you will need remove mainboard to be sure you don melt any plastic
Alright thank you, ill try later
Good luck and let me know after
Hello! Can you tell me what it is in that syringe. It is necessary to use it? Thank you. I have the same problem with a GTX 560. I hope that will be useful. I ve tried everything. Thank you.
Hi it is flux and yes is important
Hey Frog,
You should put affiliate links to type of flux/brand you used, heat gun etc.
I’m sure everyone will use ur link.
Anyways my question is just that, which flux did you use for this
Thank you
Hi you can have a look on description on this video's there is many links ua-cam.com/video/hhVQjffkLts/v-deo.html
But ye I will update description in this video as well later I forgot to do it :-)
I have a Radeon VII with error code 43. Fans and LED starts, but I get no picture signal. I heard that an Error Code is NOT able to be repaired at Radeons VII. Is that true?
No picture either means bad drivers or that the card is broken. If it's not because of drivers then throw it in the oven for 10 minutes at 200c and it might start working again
oven is last option I will recommend
Hi just want to thank you for this it saves me a money, i opened the GPU clean with laquer , clean the dry thermal paste put some flux and reheat with hot air 10 to 15mins, then clean the board dry and rethermal and it works the artifacts gone before when i enter heaven benchmark the artifacts shows right away but now i can complete the whole stress test and its working. Thank you so much ! subscribe
Hi good job my friend and I hope you can recommend my channel to you friends as well
definitely i will my friend@@frogtechtips
Does it still work?
Good question for him:-)
hello, if i dont have a heat gun like you do in the video, will a blowdryer work?
You can try some people have luck with hairdryer
@@frogtechtipsthis is a bit late, but is the flux needed? And if it’s necessary, which one do you recommend?(one that has fast shipping preferably)
@@eon7095 hi it is to help not make a short under chip some links is on description for flux
Hi Frog, I'm looking to try this on an AMD Radeon RX580 8GB card which has an error code 43. Can you tell me how long you did the reflow heating in your video?
10 ti 15 min should be ok
It didn't work after 10-15 heating. I think it will be the faulty memory chips.
@@simonng1806 did you heat VRam as well if that doesn't help is time to buy new GPU goop point is now is GPU Very cheap RX 580 8gb you can buy about 60 to 80 Euro now
Hii mate i have msi laptop gp65 leopard sek and my RTX 2060 is giving error 43....i tried reinstalling the windows, drivers, flashing the vbios everything i found on the internet even i tried to heat it with dryer but like 30-35 seconds......can u please guide what should i do like even if this is repairable or not....my laptop is fully working on intel graphics (UHD)....PLEASE GUIDE ME!.....HISTORY: i started the laptop normally and started valorant while i idle on the main menu some drviers error came had to hard restart then the gpu never stopped working...PLEASE DO REPLY!!
Hi on laptop is always hard repair something like this and if you want try reheat you need to do abou 7 to 10.min.under 300 Celsius.
But on laptop is so risky as there is to many components near that GPU
Sorry for Bad news
my rtx 2060 mobile, no error 43, and detect by laptop, but always instanly shutdown when gpu under load 2%,
gpu z show rtx on idle consume 15-25watt, before vrm shorted and was replace with new one,
may i know what the problem is?
If you replace VRM did you replace with correct one and iarw you sure is all solder balls under chip have good point
Moje karta gt740m se ukazuje a dokonce když preinstaluju windows tak 3-4 dny funguje bez problémů na plnou zátěž. Pak se notebook restartuje a nepomůže nic. Jen reinstalace. BIOS update nemůžu udělat protože můj notebook nemá baterku, nafoukla se a vyhodila. Ale prej je na to potřeba. Nějaké rady prosím? Možná se nakonec pustím do toho reflow, už jsem to párkrát dělal. Notebook jsem koupil před týdnem a nevěděl jsem o této závadě dell vostro 5470.
Tak to je dosť zaujímavé že pár dní funguje a potom nie ja by som skúsil najprv undercloock karty a hlavne prepastovanie
@@frogtechtips prepastoval jsem to hned po koupi.
@@frogtechtips Když komplet přeinstaluju ovladače a nainstaluju starší tak ukazuje všechno OK ale neukazuje se mi nvidia control panel a není ani v správci úloh. Po restartu se občas vrátí code 43 ale ovladač zůstane stejný, ten se kterým to dřív fungovalo. už fakt nevim co s tím.
@@skyes9461 tak to fakt netuším nestretol som sa s takýmto priebehom no môžeš skúsiť reheating GPU ale keďže je to laptop davaj pozor na ostatné komponenty
@@frogtechtips Hele pohrál jsem si trošku v registru a zatím to funguje ale zas nemůžu do správce úloh. jak tam vlezu tak mam blue screen. ale když to bude fungovat tak jsem s tím v pohodě. :D
hey man, my gtx titan x and rx 580 has code 43, so this good CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component 10g .
Hi this is reheating not reballing but ye if you wand ask about that flux ye should be fine
@@frogtechtips thanks
@@renaissance18 you welcome
@@frogtechtips one more question, my gtx titan x has die chip off on the top left and right = little but it has rainbow lines on boot but it gives code 43 after login, is that ok or is it dead, btw how long to heat up the die and how long to cool it with the heat gun
@@renaissance18 hi is always hard to get answer only way to find out is trying an I usually heating about 10 to 15 min
My gpu works but only with a driver from 2017 its a 1050ti nvidia any advice?
@@TristanCookr did you try bios update that can help
@@frogtechtips i did not and i have zero idea how to do that
@@frogtechtips it displays the code 43 error whenever i update to a different driver apart from the one it came with in a cd format from 2017
@@TristanCookr ok you can try reheat GPU I think can help and there is nothing to loose or jus buy another used good GPU on this Day is extremely cheap
@@frogtechtips ill try that also how do you update the bios and would i need to update the grapics cards bios or the pc's bios?
So u just had to replace the thermal paste and re install the drivers??
And reheating GPU as well
you just saved my RX 580, it was all because it covered with thermal paste!
Nice and I hope you subscribe and share my channel as well
What do you mean? That you had too much thermal paste on it? Did you even have to do the reflow?
@@-Twotonepony- good question to him
Hi, i got a laptop Lenovo Legion y520 GTX1050 and i woke up in the morning one day and my GPU just actually died somehow...I get error code 43 on device manager and i have done every repair thing that i could do, reinstalled everything, DDU, windows many times, same problem...Is there a solution to it on laptop? If i open it up, change the termal paste, etc? Could be this or just get a hole new motherboard at this point...The curious case is that it died while nothing was happening, it was off. I just woke up and it was like this, while the other night i played and used t just fine...Thanks a lot.
You can use this method on laptop as well just is more complicated as you need take off MB and do reheat
@@frogtechtips so i should give it to someone that knows what is doing, basically...not ruin it myself XD
@@iosif6959 definitely is better idea
thanks a lot, sir. Appreciate it
You welcome
Bro, please help me my GTX 660 is on code 43 and i dont know how to fix it, I can install the driver but it still shows the code 43
As is old card I only can recommend reheating GPU or buy used one you can buy now GPU very cheap bro
@@frogtechtips Bro what solutions did you use to in the first steps of the video ? Like the thing you used to clean the GPU
@@generalthrones like on video if it's not clear one this one look on my channel there is more videos about this problem and how to solve
But ye first step is clean GPU
Bro i have error code 43 in my laptops graphic card, so would chaning the thermal paste maybe fix my issue?
Usually that doesn't help but you can try at first point
after updating mine my screen goes black when clicking start menu
then if I shut down or restart my pc it goes error again even i already uodated it before shutting down
Did you try any repair or roll back old drivers flash BIOS and staff like that
@@frogtechtips what i did was set to default settings in bios but it still says error after reboot in device manage
@@frogtechtips i cant evem shut it down because it goes black screen again and again. i cleaned my fan before and i remove some parts does the screws are reason to this also
@@Kuya_Dude not sure man but definitely something going wrong and if you tried all other solutions and card is out of warranty I will try reheating that should help
Did all you said, My GTX 760 now works properly. Its a very old card. Once fixed i saw a lines throughout my PC. I have installed latest drivers and the resolution is 1080p. Looking good so far. GPU z, cpu z, msi afterburner and everything shows card specs now. Lets see how long it works.
@@SpiritedIn-ux2cr nič good work and ye is old card nothing to loose if you try this method btw I hope you are click subscribe and if you can recommend my channel to your friends as thanks:-)
Hello. Please can I use this method without flux? I don't have flux, can I use only heat gun carefuly?
Hi you can but is some risk to make a short under chip Flux is cheap just buy some if you can
Still didn't work for me. Not sure what the problem is with my Evga geforce 2080 TI but it sucks, error code 43 is still on and the videocard itself heats when it runs. :/
Did you try reheating btw do you know history of the card
I have the same code 43 but my gpu works in the lower pci slot. The top pci express 16 slot won’t run any of the two GPUs I tried. Gives me red lines through the monitor :/
If your card working on second slot just use that one maybe is something wrong with your first slot
I have a asus 2070 strix, i checked my graphics card but i keep getting error code 43, also im seeing lines going across my screen. Any help on getting rid of those lines?
As you have a line on screen is definitely GPU die problems I will recommend apply warranty but if your card is out of warranty I will try reheating GPU like I do in video nothing to lose anyway
@sayem laeeq you right
@sayem laeeq did you try reheating GPU as well
@sayem laeeq but is working still better than not working at all
@sayem laeeq I think you writing is working with old drivers btw did you try reheating GPU like I do in video
I get rx470 problem no signal no detect picture but if use gpu onboard it can see card in device manager and have yellow code 43 if use this tip it can fix problem?
Hi only way to find out is trying
If the GPU has already been cleaned and repasted and it's still doing it what can I do then?
Did you try reheating as well
@@frogtechtips I'm not sure it was a gtx 1080 someone was selling saying it had an error 43 code and it had been cleaned and repasted but didn't say anything about heating but it is still showing the code so I came looking to see how to fix it
@@CresuZClips ok than open card look for PCB and check for missing parts or physical damage on it if card looks good than try reheating GPU that should help
I don't have heat gun can it be heated in microwave oven
Definitely not never do that on microwave
@@frogtechtips how about hair dryer?
Some people have luck with hair dryer just look on the contents but I think is not strong enough
It's been 1 month since I've done this in my gtx 780 and is still working
Another proof you done good job and this style of fix working I hope you will recommend my channel to your friends
3 days ago my screen turned blue and grey and i could do nothing. I am just really svarer to destroy my gpu is there any other way?
There is not many way to fix and if your card is out of warranty try reheating GPU
i have 1650 super asus phoinex and i have same issue but sometimes everything great and sometimes it shows up error code 43 if i clean the gpu and replace thermal paste it would be fine ?
Hi that's hard to say but sometimes this helps only way to find out is make some more testing
Does i can make it with a hair dryer
@@CarLoxx12 you can try some people have luck with hair dryers
@@frogtechtips okay
@@CarLoxx12 you welcome
Thank you man this fixed my rtx 2080ti. I was playing gears 5 and pressed alt tab to go online and minimize the game but when I switched back an hour later the screen just went blue and after that I was getting error 43 and couldn't install drivers. I followed your steps last night and just slotted my card back in and reinstalled drivers and it's working perfectly.
Brilliant and thanks to let me know I hope you click subscribe as well
Have u change ur thermal paste?
@@kyawhtinlinn3685 yes
same i just think i am going to ruin it when i have to clean it
@@westy25uk Did you use Flux to reflow the GPU? What heat gun did you use?
Another testimonial that this could work.. Bought a broken ASUS GTX 970, 4GB of DDR5. It had Error 43.
I sat it on a baking pan and used a heat gun.. I could not find the right type of flux, so I didn't use any. (don't use plumbers flux, because it is conductive and will short out your components.) I followed your heating instructions. Initially I tried it and it seemed to be worse, so I set it aside.. I thought I had gotten it too hot..oh well.. Today I tried it again and after reloading the driver, it's working fine! A long term test is in order though.. Thanks Much!!
Hi good job and Also good point about some conductive Flux and I hope you are click subscribe as well
@@frogtechtips Just bought 2 "bad" Gigabyte AMD Radeon HD 7950 3GB GDDR5 GPU's for $25.00. One was completely dead, the second had a wide blue vertical line through it and was not recognized by Windows. Heat gunned the second one. Boom! back in operation. Heat gunned the first one... Boom ! back in operation. But when I compared their performance, the first one had lower score. Took it apart and heated it again. Now both GPU's perform equally. So out of four cards I had, I got three of them working. I could have never have afforded to buy these GPU's.
@@doorguru168888 so good job you done IAM really happy my videos help you I hope you Also not forget click subscribe and if you can please recommend my channel to your friends as well :-)
@@frogtechtips Subed three week's ago. 👍
@@doorguru168888 thanks so much
I got the error last week and most of the time I just manually uninstall it on device manager and after restarting it, It fixes itself up. But then it happened again recently and when I try the same method. It doesn't fix itself now
Did you try reheating card
I bought a GTX 750 Ti from a guy, he did not inform me about the artifacts and he did not inform me about an inept attempt to change the bios to the GTX 760 ...
That's strange I will send this GPU back to him if possible and try get money back
If not trying reflashing bios to correct one and maybe this will be help
@@frogtechtips I will try to get my money back :(
@@frogtechtips I started it, it shows code 43
@@alexwesker_re yop try get money back if possible
Hi my flux say it might contain lead should I use it?
I will recommend use non conducted Flux
Well I don't have one
Also how long should I heat it up my heat gun is 1500 watts
I'm just going fluxless
@@MEEL0RKS it is risky but not impossible just try and I do usually about 10 min
I have error 43 on my gpu and vram is showing 0 so will this work?
If you sure is vram Bad best way is replacing foulty vram module but you can try reheating
Hi I have done it as you said but I still got error 43, I dont know what to do
Hi not every card can be repaired with this method your card have probably some different foult as well bad New for you is you will need new card probably
me too :(
Hi Frog. I'm currently getting a issue with my asus flowX13 gpu. At some point, Im not sure when, the gpu (3050Ti Labtop) stopped working and windows task manager stopped detecting it as well. I went into device manager and it says the gpu has an error 43 - I checked online and tried all the solutions they offered (reinstalling drivers, safemode, etc). Right now its using the default AMD radeon graphics. I checked the asus armoury crate as well and it states that the GPU is in extreme powering saving mode and I can't get it out of it. (its not on IGPU mode).
Thanks!
Hi on laptop is always hard fix problems like this and as you try all other solutions and if your laptop is out of warranty you can try reheating GPU but on laptop is so hard as you need take off all of the parts
Have you found any solution? I have the issue with my laptop
@@KT-yl9wc the solution is the same if your laptop is out of warranty
@@KT-yl9wc If you have your warrentee, I'd definitely suggest you to do an asus return, I ended up sending it back twice because the first time they just updated my software and called it a day. I sent it back the second time and they ended up replacing my motherboard as well.
That's right way :-)
THIS. FUCKING. WORKED. I dont know how and i dont know for how long, but this actually worked. i did it with absolutly no hope (and no flux) and stoped short before 10 minutes when i heard a pop comming from the board. still assembled it, still conected it, and... here we are!
Nice job is little risk do without Flux but good Job I hope you click subscribe as well
i have a rtx 3060ti
and it shows a error code 43
now i dont have the flux to use
how am i supposed to fix it the same way
plss anyone reply and help
Without flux is rising to do but is not impossible but if your card is in warranty try first that way my friend
@@frogtechtips sir how can i contact you
i managed the flux and thermal paste and the needed things
i jusst want to show you the things
plss
@@wasifrazin7560 hi you can contact me on email frogtechtips@gmail.com or on Facebook just find my Also under frog Tech Tips :-)
Out of all the other videos this is the best . Solid
Thanks so much I also hope you subscribe to my channel
how many times can you reheat gpu until it cant be reheated?
Not sure man I think how many times you want :-)
I cant use my keyboard it has been reported to code 43 pliss help
Replacing your keyboard can help
Hi, my friend I need a photo for that video card to compare with my gpu to check resistors, how many resistors uses that card, I think in my card lost any resistors or Where I can find gpu diagram? Thanks in Advanced
Hi I don't have this card on my hand any more and I don't know where to find diagrams sorry can help you with this
I don't have the heat gun what I'm should to do ?
You can use oven but is way IAM not recommended
Hello frog I actually having the same problem but my Video card is running in low end like 600x400 something if I do that method can it fix it? Do I have to do it with the heat gun and with the fluid in corners I have gtx 1050 4gb ti
Hi is always hard to say if this method will help you but I always say if you try all other solutions and your card is out of warranty there is nothing to lose anyway
I just applying right now your method frog hope it works
UPDATE: FROG IT'S WORKING RIGHT NOW ILOVE YOU MAN!! GODBLESSSSS
@@kennedyarriola2570 you welcome man and I hope you will share my channel with your friends as well :-)
@@frogtechtips hi frog my gpu is good for now but when i played valorant they keep crashing and having a garbage display on it i tried to update the driver and uninstall it what should i do
Hello mine doesn't work i use the gt 1030 the small one please reply and help me 🙏
What did you try btw 1030 is so cheap this day if reheat doesn't work just buy new better card if you not trying reheat just try there is nothing to loose anyway
It worked in my GTX 970! I cleaned the thermal paste, used a lot of IPA 99%, let it dry then used the heat gun. Reinstalled the drivers and voilà! Thank you!
You welcome and good job I hope you are click subscribe as well :-)
Did you use flux and add paste after you cleaned?
@@Cutthroatish use flux before you heat up
@@frogtechtips I’m getting pink lines across the screen now when it boots, but doesn’t work (code 43). Maybe I put too much thermal paste on?
@@Cutthroatish just try reheating again with little bigger temperature and longer time
Hello frog...
Sir. i did this EXACTLY! to a 2080 ti FE... and now my gpu is totally bricked.
NO post, fans are on 100%. the rtx nvidia logo inactive. i inspected my card it has no burn marks or any missing components. whats going!???
i totally regret doing this on a RTX card. any advise is appriciated.
Did you use flux as well and ye this sometimes can happen as well is always risk but you can still try reheating again
If this isn't a laptop GPU then you're probably gonna have to take it out entirely if you want to use your PC again...
I can't install Nvidia drivers for my gtx 760 can you give me link of the driver you are installing ?
Just go to NVIDIA web and choose drivers you need
@@frogtechtips I did it's not installing and I have error code 43 do you think it's hardware problem?
@@saleemshaikh4904 if your try all other solutions I think yes you can try reheating as your card is out of warranty there is nothing to lose anyway
@@frogtechtips all right thanks
@@saleemshaikh4904 you welcome
Hello sir, i got error 43 on my asus strix gtx 1070, the artefact appears only on windows but not in bios and safe mode, it's still can be fix?
Hi if you tried all other solutions and your card is out of warranty I will definitely try reheating GPU there is nothing to lose anyway
@@frogtechtips on it sir, just cant find a heatgun nearby right now sir
Or can i just put it under the sun light? We got lot of it
@@faisalrahmat9114 don't think that will help but you can make a experiment
Bro what was the name for that spray bottle which u did at starting
Is isopropyl alcohol
@@frogtechtips Is it nessasary can we just put thermal paste without any thing
@@Error40423 hi clean old thermal paste and put new one is ok
so can I use microfibre cloth instead of it or vineager
@@frogtechtips or can I use nail polish remover
i have the same gpu with code 43 issue but no vram showing, does this process still gonna fix the issue?
If there no physical damage I think yes but you can try reheating just VRAM modules
Hello
How much time the card will live ?
Always hard to say from my experience some card is live even 5 years after repair like this and some can die after 1 h :-) card in this video working still today
@@frogtechtips I hope it will works and live a llitle bit longer
@@fadil-dy5zk if your card is out of warranty there is nothing to lose anyway and proper fix can be so expensive that's I always prefer reheating
@@frogtechtips unfortunately it's not work all time
Sometimes it's turn on ok
And sometimes I got 43code error
@@fadil-dy5zk did you try any fix did you try some older driver's
Why my monitor turn black screen and unable control anything when redownload driver?
That's can be many things but I will bet for bed ram module or HDD at least foulty GPU only way to find out is make.some test
Brother i get blue horizontal pinch lines and code 43 error it will work for me?
Hi if your card is out of warranty try there is nothing to lose anyway
Bro i m stuck in lockdown i dont have gel or anything
Is there any other way?
Mine also gtx 760
@@abmal8730 you can still buy some staff online if you need
sir please help me in my gtx 560 i had the same problem but in gpu z it shows gpu memory is 0 mb and gpu clock is 0 mhz and have flickering dim display
Did you try reheating GPU or any other solutions
Nah i dont try it yet can i email you the picture so that u will now how can i fix it
I try flash the stock bios and still wont work, this is my first gpu in my entire life since i have my computer last 2019 hope i can fix it cause i need it for my animation class🥺
@@saldikurtjhaive412 if you sure there is not physical damage on GPU just follow steps in video and should help
The gpu looks new
Hey man, im really having a hard time figuring out what to do with mine. Same GPU (gtx760) but it's twin frozr. I did all the software thing to get the error 43 out but still there. My last resort will be this and I'm too scared to open it because of lack of experience and Don't have the liquid to reflow nor the heat gun. What do i do? Hope you see this.
Hi if you tried everything else and as your GPU is so old and out of warranty anyway just do what I do in video and that's should be help you can buy cheap heat gun and flux on eBay
Thanks, there's nothing to lose anyway, but will it be hard because of the two fans? Do i maybe microwave it? You think it will work 🤔
@@anthonysumail4562 microwave definitely not don't do that
Ohh i meant oven, or maybe a blower but is it hot enough. Trying to find alternatives in our house. Thanks for responding tho, really appreciate it and I'll sub cause of that.
@@anthonysumail4562 thanks for sub and ye oven is opinion but last one I will recommend
I have an issue with an GTX 1060 6gb GPU (Inno 3d Compact X1) that can't run a mats to test it, also has the error 43 and gpu-z shows everything good except ram (0mb), bus and bandwidth. This is a memory corruption issue I guess but I don't know if it is one of the memory chips, memory controller or anything else :(
3
Hi memory module is usually problems I will definitely try reheating memory modul all of them if your card is out of warranty there is nothing to lose anyway and I think will help
@@frogtechtips I will try it for sure.
@@vjeko3471 let me know after
Hey frog I have Radeon Rx 5500 xt 8gb oc with code 43, do you do services like this card that you fixed or was this just an example.
Hi I can try fix your card just send me mail or if you will following all steps from video you can do it yourself is easy but if your card is in warranty go that way first
@@frogtechtips do you have an email or other contact so we can communicate, you’ll probably do this better than me and are you in the United States?
@@ehgawshee1 all other contact is on description just have a look but IAM from Slovakia with is probably not cheap send card to me I will recommend you find a local technician
@@frogtechtips okay thanks for the response great videos 👍
You welcome and I hope you will like my other content as well
my gpu amd rx 570 also gets code 43 sometimes and gives no display(i checked with second monitor connected to igpu) on boot but other times it boots up fine and gives display with no problems even on 100 percent load. Could these steps fix my gpu too? I tried it in many different systems and it gives same problem
Hi if your GPU is out of warranty and you try all other solutions like drivers, BIOS etc I will definitely try this there is nothing to lose anyway
i have rx 580 sapphire nitro 8gb. and had an error 43 just like ur video.
If i do like what u did in this video. will it be fixed?
i ady use atipatcher just like others told me. but it still the same. gpu clock and memory clock 0.
should i try this?
Hi I think yes will be help and as your card is out of warranty I will definitely try that there is nothing to lose anyway
Does this work with low profile card?
Should working just try
I try it and still not working i have GT730 4GB and it show me glitchy screen with error 43
@@28cxi that's mean just buy new card man is completely dead and you will need probably replaced Vram module but that's is more expensive than new card
Mám tento istý problém, ale na mojom hernom notebooku Asus G56JR GTX 760M. Kupim si to flux dufam ze to pôjde
@@davidkovac7670 na notebooku sa dá použiť ten istý systém ale treba dať fakt bacha a vybrať celú dosku a pozor na okolité plasty
@@frogtechtipsmôžem na to použiť aj UV flux pastu?
@@davidkovac7670 flux je hlavne na to aby sa nespojili komponenty aby sa nezlial ten cin ak má tie isté vlastnosti tak áno môžeš ho použiť
@@frogtechtipspošlem Ti link ktorý by som chcel kúpiť
@@davidkovac7670 kľudne
what is the heating done for?
There can be some cold soldering point under chip and heating can fix this problem
@@frogtechtips thank u prince frog ✨✨✨
You welcome bro
Hello, how long must the heat gun be held on the card? Thank you
Thank you, it works thanks a million
Like i explain in video 10 to 15 min
I read now you fixed your card I hope you click subscribe as well :-)
He uses CS-Flux right ? is says on CS-Flux page to use 200C. Does it make a difference ?
Also I don't understand what the flux does exactly
Hi flux take care about not making short once soldering point melted and 200c is to low
@@frogtechtips CS-FLUX Low viscosity Halogen-free liquid flux BGA rework reflow reballing 5g
will this get the job done ?
also thank you very much for all the help :)
@@royboy671 yop just my recommendation is gel fluxes type is not important and not a gel one try liquid one
@@frogtechtips Awesome! ordered it and hopefully will get my GTX 780TI back to life. Thank you!
Hey Frog. I got a GTX 1660 Gaming ES Colorful
that has Error 43 in it. Will it still work using this method despite having different cards you have used?
Hi if you tried everything else and your card is out of warranty definitely try this reheating there is nothing to lose anyway
Thank you for this great Video!
I tried this on a GTX 760 with the Error 43 but with a hairdryer for about 8mins and suprisingly it worked.
Nice job and yeah another luck with hairdryer
hey what kind of item u use ? or u just heating it only?
@@centigonalexander hi is writing hairdryer but I will recommend heatgun
i have nvidia card too with error 43 is this gonna work too?
If you tried all other solutions and nothing works plus your card is out of warranty I will recommend reheating GPU there is nothing to lose anyway
Thanks, you saved my gtx770 and my day!
I actually don't have a heat gun but i have a strong hair dryer (2500w) so i used it on max heat slow fan for 10 mins and it worked. Maybe it was just the old thermal paste that had to be cleaned up and the hair dryer thing was useless but anyway i have my gpu back and I'm happy.
Wish you the best.
Thanks to let me know and I hope you click subscribe as well
Please reply
Did you use the flux????
Is always better do with the flux
It is not the thermal paste is the issue, but the contact point under the gpu.. Maybe some of the soldered point was already having old soldered.
Ye but as thermal paste don't get heat out and GPU overheating and that's why happens
Help me frog my laptop has an amd radeon 535 gpu it suddenly stopped showing on the device manager i tried everything and no hope but after a minth later it fixed it self and showing up on the device manager but with an exclamation mark on properties it says code 43 i did everything even formatting the pc and reinstall windows non of them fixed my prob😭
Only way is reflowing GPU on main board but on laptop is so hard to do. Sorry for Bad news
please i really need a fast reply , someone is seeling on ebay his 2080 ti , he's a dad not really in computer , and got the problem he bought another 1 and he's selling this one for 200€ , i'm just asking myself if it's worth trying and buy it ( with the error 43 ) please reply
Hi is hard to say but ye usually you can fix error 43
And don't forget you can still selling that card again on eBay if not working with the same description iam just not sure 200 EUR for broken but is ti version with for 200 is probably ok
@@frogtechtips thanks for your reply , if the card is broken there are other sign than just error 43 , if the card isn't broken and just have the error 43 than it's repairable pretty easily from what i saw on internet , how cqn i know if the card is dead ?'
@@entouaneee5328 you right usually error 43 is easy repair if you know what you doing:-) if card don't have any physical damage is probably repair possible
I have the same error, I tried reinstalling the original bios and patched but nothing, can I send you mine? I can pay you if you want because I’m desperate
Hi if you are from Europe you can contact me on email
@@frogtechtips yes im from italy
@@gagaebs3227 ok if you want contact me on email but IAM sure if you will follow my videos you can do it yourself 🙂
@@frogtechtips sorry i cant find your email ahahah
@@gagaebs3227 frogtechtips@gmail.com
j'ai un carte graphique geforce gt 610 ne travaille au derier verions de update travaille seule au version 2014 pourqoi ?
Sorry not understand
thank u so much it really worked .i just used hair dryer for about 7 minutes and new thermal paste i just had to reinstall the driver from device manger and done
Good job man specially with the hair dryer don't forget click subscribe and as thanks I will be happy if you share my channel within your friends:-)
Hello, I have a problem, if you can help me, I don't know what version of drivers I need for a video card or give me a link where I can download it, my video card is Msi GeForce gtx 760, my card is
Just go on NVIDIA web a chose your GPU types and correct drivers will come up
Hello, I have a video card, there is an ISI gtx 760 thread, but I don't know, what version of drivers are compatible with the video card? Send me a link to the drivers version? !!!
@@cristinasalagan3797 just go to manufacture web or go to NVIDIA web you will easily find correct drivers
Is there a certain type of flux I need to do this? Will RMA-218 Soldering Solder paste work?
I I think rma 223 will be better but but sure any Flux is better than nothing
Ok my friend has some RMA 218 is why I was asking just incase i need to buy the correct kind. I dont want to accidentally use any that may have metal if it's not supposed to have it. The link in description showed AMTECH NC-559-ASM No-Clean Tacky Gel Solder Flux. Is this the kind that you used?
@@Holy-Hand-Grenade-of-Antioch you right any flux without metal in is good I prefer gel one but Also liquid one is good as well and the 9ne is description is definitely good as well
Thank you a lot. That was magic for my old evga nvidia gtx 760. I tried everything and almost lost my hope for it. But that works!!!
Nice to hear IAM help you and I hope you are click subscribe as well
@@frogtechtips hey frog, i got code 43 on my titan x with horizontal lines can you help me
vyriešilo problém s mojou GTX 760, už som si myslel že umrela! Díky.
Nemáš za čo q dúfam že si dal aj odber
it work on my rx 580 = 5 minutes heat gun 1500 low settings without flux gel = i got a signal for 2 minutes but i lost signal again, so i ordered the flux gel and i will try again lol
Máš to i česky? Edit: brácho poraď pls, mám tady rx 470 8gb od xfx, šťáva do ní jde, gpuz hlásí 8192MB RAM, vidí i GPU samotný, jenom nevidím pixel fillrate, texel fillrate a propustnost paměti.. Na 3.3V railu je nějaký zkrat, je tam minimum odpor asi 0.2ohmu. Na kartě se nic nehřeje, resp. nepálí.. GPU se zahřívá, po cca minutě od zapnutí je horké, musí se vypnout pc takže tam šťáva jde.. poraď pls
Zdravím ťa nie nemám to no rád skúsim poradiť išla ti ta grafika predtým normálne. Ak by tam bol skrat tak Pc by nešlo zapnúť takže tam bude iná chýba
Vieš aj históriu tej karty
@@frogtechtips kartu jsem už takto koupil, teď řeším na fórech.. btw zkrat tam není, mine fault, jel jsem 4pin zleva ale to je země, 3.3V je 4.pin zprava, tam je reading ok, cca 2K ohmů
@@paveljelinek772 tak v prvom rade by som skontroloval kartu či náhodou nieje aj fyzicky poškodená a keď by bolo všetko ok asi by som najprv skúsil nahriat chip a pamäte keďže aj podľa merania vyzerá že karta je ok
@@frogtechtips no právě, fyzicky vyzerá naprosto vpohodě, asi taky pošlu do servisu.. teď jsem jim posílal 480 8gb od gigabytu, no detect... Na grafice byl myslím zkrat na 3.3V railu, konkrétně na zadní straně jeden ARM čip, nějakej holtek.. a pod proudem úplně hořel takže ho vymění (novej stojí cca 80kč) takže paráda.. a tam se pod šťávou ani ramky, ani gpu, ani mosfety nezahřály takže jsou ok..
@@paveljelinek772 tak keď máš servis kde ti to pozrú určite im to pošli pri dnešných cenách za grafiki sa to oplatí
After doing all this and installing gpu into pc, my pc now cant detect gpu gtx 760 and uses integrated graphics card, tried to remove and install again but it doesnt help.. pls help
I cant install drivers, it says my system is not supported, In device manager no such NVIDIA exists, my pc doesnt see the GPU.. on GPU green light is on, fans are working
@@PlanesAndCoffee000 did you check main board bios maybe you have something disable over there and did you plug in power cable to GPU as well
@@frogtechtips thanks for answer, I checked BIOS but I cant find anything related to GPU, I plugged power cable, FAN is spinning and green light is on chip is blinking. I tried to install same 760 on other pc and problem still exists. I cant get any video data from card to monitor. What else would you suggest?
@@PlanesAndCoffee000 that's mean you have 2 card and both have same problem if yes for me sounds like you MB foult or really BIOS setup look on something like with GPU is preferred there definitely must by something on BIOS and also if you can try that card on different pc
@@frogtechtips sorry, maybe my answer was unclear but I installed reheated GTX in other PC to check if problem is still exists and other PC couldnt detect gpu too! This means I damaged gpu or something during reheating :(
Still working ? Reflowing is not a long term solution ?
Some cards working 2 Day and some even after 5 years
its now the 4th time my gtx 1660 had this error code
the first 3 times it "fixed itself" after a few days, but now i have the problem for 3 weeks.. I'll try this to fix it. Does someone have other advice?
Hi just use flux and don't fo physical damage on the card
I got that error43 issue on my palit jetstream 2060 super. Before going on to the windows , the small pink lines appear on the screen and when it comes to windows , the resolution is too low. And I tried to reinstall the drivers and it showed driver installed successfully but nothings has changed. Would it be okay trying the method of reheating? I still need to try on reinstalling windows method.
Hi as you have red line as well I think only reheating will help but do this only if your card is out of warranty