HOW TO ADJUST HANDBRAKE PARKING BRAKE. HANDBRAKE LOOSE FIX!

HOW TO ADJUST HANDBRAKE PARKING BRAKE. HANDBRAKE LOOSE FIX!
If you need to adjust the handbrake, parking brake cable on your car because the handbrake feels too loose and does not work we will explain how to do that in this video. Most of the vehicles will use similar design to adjust the handbrake, parking brake so this video will work on multiple car makes and models. Our handbrake was too loose and as a result the car could easily roll downhill because the handbrake / parking brake was not functioning correctly. By adjusting the handbrake / parking brake we were able to easily fix that and our handbrake felt firm and working correctly again. Make sure that you do not over tighten the handbrake cable too much to avoid the handbrake dragging all the time which could be dangerous and lead to accidents.
► Great Car Scanner: amzn.to/2QmNBri
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/users/AutoRepairGuys
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@longlifetimingbelt2731]

Back wheels of the deck, handbrake off and turn the adjuster nut until the rear wheel start to bind, then back the nut of a turn or two till the wheels are free.
If the cables are stretched and there's no thread left on the adjuster rod, take the nut of the adjuster rod, use such as steel washers to make a spacer, putting them on the rod, then screw the nut back on so the washer spacer is between the nut and the cable equaliser bracket. This will allow extra adjustment.

[@craigrichardson5367]

You say till the breaks are free m8 if handbrake is loose does it make the car feel like it's being held back by the breaks

[@hamsandwich8257]

@@craigrichardson5367I tightened my handbrake like how it’s done in the video and while it wouldn’t hold the car most of the time it was much better then before. I drove it one day and then parked it back on level ground. The next the the handbrake was extremely loose and didn’t hold the car at all on a tiny slope. Any idea what to do?

[@INFINITEShoobes]

​@@hamsandwich8257 time to open the break drums

[@colinjames240]

Does this work the same for DS3 or is it a yellow push pin to reset the handbrake

[@amirraza1983]

Thankhs a lot it really helpful for my honda jazz car

[@TheRealMrCods]

Not the same on my 2009 Dodge Journey/Freemont. This will not help with earlier models.

[@davidgraham-parker6934]

How to open center handbrake console on i20 glide model

[@stephaniesheridan5474]

Would a handbrake in this condition cause the rear pads to bind against the rotors? My handbrake is really wobbly but still engages well, and both my rear wheels won't spin. I suspect they're 2 separate problems but worth asking just incase it could be related.
Two front wheels spin fine.

[@jayflow4260]

What did you find out?

[@stephaniesheridan5474]

@@jayflow4260 Where the handbrake cable was attached to the rear wheels...it had seized so the brackets that were keeping the brakes applied (handbrake on)...were stuck in the same position even with the handbrake off.
The brackets just needed lots of wd40 and wiggling back and forth to "unstick" them.
Hope I explained that ok haha.

[@Weirdoh8er]

My car I swear has the same problem, whenever I brake I hear a thumping sound. After jiffylube fucked up my cars brakes I noticed that my ebrake handle was able to move left and right like a stick would. Idk how they mess something like this up

[@Aryan-tw3lg]

I have a Hyundai and it doesn't have a screw to tighten anywhere, please suggest a wayout,

[@darryllspalding9680]

not ALL are created equal, makes and models vary, get a workshopmanual for your vehicle and read the instructions!

[@jagsthegamer1353]

Thank you

[@RorisangRori-yq5gv]

Hino truck hand brakes problem

[@jamalmakki3700]

Hi ... WHY you didn't reply on My comments .. WHY??!!??
I asked you before about fixing codes on KIA .. remember that!! WHY you didn't reply ??

[@medstudent2667]

Lel

[@edd3683]

@@medstudent2667 lel

[@TurtleMonkeyGG]

Lel

[@klnvv]

Lel

[@hoveringstorm27]

Lel