I give Lauren major props for being a summer school teacher and a regular teacher. She has a great personality, seems very loving, sweet and funny. The schools now days need more teachers like her. And for you Chase, keep up the great content. I love your videos. Doesn't matter what kind it is. Im waiting it. Ive been a subscriber since the mustang. Sending good vibes, prayers and love to your son. I know school is fixing to start. He is hilarious.
I didn't know Lauren was a teacher. My hat off to her she looks like she'd make an excellent teacher. I've been teaching for 23 years, how I met my wife.
I second this. As for the ride quality I’d check tire psi as well. 30 psi should be about perfect for those thorn birds, they’re not known for riding well though
Your videos have made me want to do more with my tenth gen. Love Larry! Also, use the 1 in isolator on the front and it will help with the ride and the upper control arm angles with those arms.
L…A…R…R…Y…!!! Finally, some Larry content!! 🎉 I do have to say that personally I think it looks better lowered a little, the biggest turn off for me is the current setup. I think a little less poke would look perfect 👍 Keep up the incredible work Chase and I hope your planning of covering the entire build in a series of the new shop??!!??
Hes back💪🏾larry definitely staying lol, love this truck i hope you can do more with larry if possible 💯. And chomper sounds fire 🔥larry sounds good too
My wife’s a teacher here in Florida going on her 9th year and summer school definitely pays more here too. States really need to pay teachers more for what they have to deal with day in and day out!
Yo LMFSCREW uploaded let’s goooooo. Larry’s looking good and sounding good you should put a HSP or RPi white colormatch cold air. intake on the 6.0 it would make the engine bay look clean
I may be wrong but are those wedge spacers on top of the newer blocks? If they are the thicker part is suppose to be towards the rear to help the rear pinion angle
Like it at this height. When you initially did the front lift spindles i really started appreciating that gen f150 2wd and ive been lowkey searching for a clean low mile one. As it sits now is something id like to do for myself. 1 thing i weirdly despise is the ugly steering wheel, much prefer the spoke 03 to 05 chevy style. Maybe u can look into replacement alternatives 3 or 4 spoke with or without air bag? Anyhoo thx for the content, best to the fam
Where can i get pair those control arms from?? I have the fabtech but i need to replace them one is bent but fabtech doesnt sell them anymore for my truck
Looks way better i talk to my trucks like their my kids 😂😂😂 my chevy Silverado got a leak on one of its tire and i said aww you got a boo bo dady will fix it 😂😂 my f150 check engine light came on and right back off and i said aww my baby got a headache 😂😂😂
I give Lauren major props for being a summer school teacher and a regular teacher. She has a great personality, seems very loving, sweet and funny. The schools now days need more teachers like her. And for you Chase, keep up the great content. I love your videos. Doesn't matter what kind it is. Im waiting it. Ive been a subscriber since the mustang. Sending good vibes, prayers and love to your son. I know school is fixing to start. He is hilarious.
I didn't know Lauren was a teacher. My hat off to her she looks like she'd make an excellent teacher. I've been teaching for 23 years, how I met my wife.
On her 3rd year! She loves it! (Most days lol I’m sure you can relate)
Please do not sell Larry, he is the reason that I started watching your channel and I have a truck just like him and I love the content
Me too
He literally said at the beginning that Larry is the one truck he would never sell😂 pay attention
@@David370z I posted that prior to watching the video, calm yourself.
@@Cjo0211 I’ve been calm, just pointing out your mistake. Might as well delete your original comment since it’s pretty much pointless.
Same
You need to flip them upper ball joints. So the ball joints mount to the top of the control arm instead of bottom. Will help the control arm angles.
I second this. As for the ride quality I’d check tire psi as well. 30 psi should be about perfect for those thorn birds, they’re not known for riding well though
This
Larry's lower control arms thank you! 😂😂😂
it’s always a good day when lmfs post
Fr
In my opinion that lift/wheel and tire setup looks amazing. Best setup yet on larry. 👍🏽
The Thornbirds look so good on Larry
Dam chomper sounds mean as hell.
Love the Larry content, definitely need him more on the channel 🔥
Congrats on 200k I am a big fan of your channel and a huge supporter ❤❤
Your videos have made me want to do more with my tenth gen. Love Larry! Also, use the 1 in isolator on the front and it will help with the ride and the upper control arm angles with those arms.
I’m so happy to have more Larry content
I’m glad, more to come I promise!
@@lmfscrewyour next truck you should get a 2nd Gen 24v Cummins
L…A…R…R…Y…!!!
Finally, some Larry content!! 🎉
I do have to say that personally I think it looks better lowered a little, the biggest turn off for me is the current setup. I think a little less poke would look perfect 👍
Keep up the incredible work Chase and I hope your planning of covering the entire build in a series of the new shop??!!??
Well time to pull the rear block’s again for smaller ones..
200k nice work my man👍
“Larrys a big girl” 😂
Hes back💪🏾larry definitely staying lol, love this truck i hope you can do more with larry if possible 💯. And chomper sounds fire 🔥larry sounds good too
My wife’s a teacher here in Florida going on her 9th year and summer school definitely pays more here too. States really need to pay teachers more for what they have to deal with day in and day out!
Yo LMFSCREW uploaded let’s goooooo. Larry’s looking good and sounding good you should put a HSP or RPi white colormatch cold air. intake on the 6.0 it would make the engine bay look clean
Congrats on 200k subscribers!
Yeah Larry’s a keeper😎
If it pulls to the right check your idler arm. And of course a wheel Alignment. Had the same issue on my 10th gen 2wd
Leave Larry alone. Look good with Thor birds
Just need brush guard. And moonvisor.
The farm is yours? Thought it was family land and you lived in a neighborhood. That’s a sweet setup
“Larry! You wild”😂
I wish you the best of luck with your shop
I may be wrong but are those wedge spacers on top of the newer blocks? If they are the thicker part is suppose to be towards the rear to help the rear pinion angle
Outta go with a 3” body with block panels so u can’t see the gap , and just go as big as possible with it
Makes me happy when you say you’re never gonna sell it and I hope you never do.
Looks better now imo
larry is such a good looking 10th gen f150
🙌🏻🙌🏻🙌🏻❤️
Clap wagon redemption arc 😂😂
In all seriousness can wait to see what else you do with Larry
You should’ve just got longer shocks and ball joint spacers if you need them
Try those wheels on cheat code ! The old school welds
Hey, I’ve been thinking about it. What you should do with Larry is converted to four-wheel-drive from 2 Wheel Dr. that would be cool to see.
Like it at this height. When you initially did the front lift spindles i really started appreciating that gen f150 2wd and ive been lowkey searching for a clean low mile one. As it sits now is something id like to do for myself. 1 thing i weirdly despise is the ugly steering wheel, much prefer the spoke 03 to 05 chevy style. Maybe u can look into replacement alternatives 3 or 4 spoke with or without air bag? Anyhoo thx for the content, best to the fam
Should order the 2” ball joint spacer for those uppers and order Chevy kryptonite ball joints because they work and turn that thing up
Larry looks 10x better now
I love Larry leanin
Letting go of the steering wheel was pretty funny.
I like when it's stats higher look good
Classic larebear is back!!!!
What exhaust kit do you have on Larry? I’m about to get mine done n I can’t find the right one
Where can i get pair those control arms from?? I have the fabtech but i need to replace them one is bent but fabtech doesnt sell them anymore for my truck
I like your videos ❤and I like your truck 😮
Keep up the good work 👍.
What kind of exhaust do you have on larry
You motivate me to build my 88 OBS Chevy
Yea u liked the baby squat larry
When you are ready, sell me Chomper please!
Where did you get the 5 lug to 6 lug adapters from on Larry? My truck is a 02 f150 Haven’t found any for my truck.
200k subs!!
Pull the blocks make it lean
Actually, Larry doesn't that bad at all, really he looks good.
I wish Larry had a cam
Go get Larry alinement he deserves it
larry looks like he riding butt high now? maybe just me but looks awesome anyway, probably rides better too lol
Just a little higher in front would be perfect
Now just do the frame and add fog lights to it.
Bro chomper sounds like an animal!!!!
Is Larry a 4.6 or 5.4? My dad recently bought a 98 4x4 f150
If it had less offset, it'd be perfect
Look good
Yo big fan
Preciate it!
My 2023 Silverado on a 8” with 37s mirrors or 6 ft
Did he put a new cam in chomper
But I got an 03 f150 single cab manual and it’s 2wd too lol
lol just going to roast you on that truck being 2wd worth a lift
We need Color matched tow mirrors for the F150!
Looks much better but too much stance
If she’s a teacher then what do you do?(just curious)
You said " Larry's a big Girl " ??
Let me buy that lift
Larry needs a coyote !
I got cash in hand for the lift
5.0 coyote swap Larry
Do not sell Larry I have been watching you since you put the drop Shackles on Larry
Do you like LARRRY or CHTC0DE better?
Lemme buy the lift
#larebear2.0
Dude please don't sell Larry i love this truck
Bro please don’t sell Larry I’ve got a lot of my ideas for my ‘97 4.6 same color just single cab I need needs entertainment
Looks way better i talk to my trucks like their my kids 😂😂😂 my chevy Silverado got a leak on one of its tire and i said aww you got a boo bo dady will fix it 😂😂 my f150 check engine light came on and right back off and i said aww my baby got a headache 😂😂😂
But WHY ?
no don't sell it i want to buy it
Please don’t squat Larry he would look really good sitting level.
It looks good the way it is. I can't stand that ass squatting crap. Don't don't care how much or little the aquat is.
Not even that big
The content is boring now. Time to unsubscribe. Later y'all.
Larry sucks
I can always count on your negative comment to be here
🍪