Larry looks sick! Definitely 2inch spacer in rear and swap the grill and front bumper from Big Red. Then 37 Grapps on 03 f150 FX4 stocks, or 24x14's on 35's!
Recently just bought a 2005 crew cab Silverado with a 5.3 in it and I love to see chomper content gonna have to go back and look at what u did love the videos keep it up
L…A…R…R…Y…!!! He looks absolutely incredible, been a long time and I’m so glad Larry finally has his lift! I say 37s with a 10-12 wide at max but I would love any old school look as you mentioned!! Keep up the amazing work!👍
16:43 could be camera angle but it kinda looks like the rear axle ain’t centered in the opening just figured id mention it bc it could cause issues when you go to a big boy tire. I know some lift blocks have off center alignment pins. Larry looks dope btw keep ‘em coming.
Just throwing this idea out there. I think you should do a giveaway with Larry after you get it completed! 🤷🏽♂️ 25-50 dollar mystery boxes one box has the keys. That would be pretty cool.
I went with the 5” lift but my wheels have negative camber and are adjusted to the max they can go, did u do anything about it? Change upper control arm?
Okay this re earned my sub. I refused to be following a squat queen. Lifted Tahoes a rough one but atleast it’s not a massive lift on dumbass big wheels
Do you have aftermarket control arms on as of when you put the lift on??? Tried to put coil overs on my 2000 2wd and it wouldn’t clear with my stock uppers.
I say do an old school style look. I think all the options you said would be sick. But I think some 16x12 or 16x14 or even a 16x10 and go really big on tires would look sick
For future reference it’s a lot easier to lift the truck from the rear diff, undo the u-bolts then take two pieces of wood (like the one you stacked on the jack but bigger) and put them under the leaf springs on each side of the wheel hub then lower the truck onto those blocks it will then separate the space you need to remove the old block and replace with new one then Jack the axle back up to put ubolts back in. ALWAYS jack the truck from the rear diff when changing blocks and do one side at a time it will avoid messing up rear alignment.
The inner wheel seal behind the inner wheel bearing should be a press fit into the rotor/hub assembly. I don’t know why yours seems loose and staying with spindle unless it’s the wrong seal for the rotors/model you have. It should have to be pressed or tapped into place on the back of the rotor with a seal driver and hammer, retaining the inner wheel bearing too.
16s and 38" mud grapplers on old Larry! Keep it classic with the late 90s early 2000s.
Yea that’s the only way to go hope he does that
I agree!
And not that gangster shit
Time to put some 37 mud grapps on it now
38x15.50 graps!!
Only on 24 foes 😂
Hell no he already did mud grapplers you idiots
38x15.50
Nah wides
Definitely should do the bullet holes and mud graps bc they go so well with the look of the 10th gens
Love the idea of 37s and bulletholes
Larry looks sick! Definitely 2inch spacer in rear and swap the grill and front bumper from Big Red. Then 37 Grapps on 03 f150 FX4 stocks, or 24x14's on 35's!
The way he is doing the truck make it look so hard
Bud loving the content, putting out bangers.i think 37s and 12 wides would look🔥
Larry lookin hard!!!
Recently just bought a 2005 crew cab Silverado with a 5.3 in it and I love to see chomper content gonna have to go back and look at what u did love the videos keep it up
it looks so good love the vids man.If nothin else you’re getting to know the front end of the truck super well 😂
I think 37’s on 24x14’s would look nice. Nothing crazy but also kinda crazy at the same time.
That’s what I was gonna say cause 35s even with offset is way to small
24's? them some blackie rims lol not enough tire
“Nothing crazy”
L…A…R…R…Y…!!!
He looks absolutely incredible, been a long time and I’m so glad Larry finally has his lift!
I say 37s with a 10-12 wide at max but I would love any old school look as you mentioned!!
Keep up the amazing work!👍
I am agreeing with you I wanna see that old Larry look with the bullet holes and mud graps.
Looks good. You may think about adding a 2” spacer to the rear the front sticks out more than the rear just how them knuckles do when put on
I like the welds idea, but definitely wide is the way to go
Can't wait until Larry is fully done it would look soo good you have a good taste in trucks I tell you what
24x14 chrome wheels with 37 inch tires would be the perfect setup
Looks great ready to see it on some gladiators again
Yes Larry! Finally! That looks so effin good dude! I agree with goin old school with it!
Think it would look pretty good with the Mickey Thompson classic 3’s 16x12 with a decent 35 or 37 mud grip. It would have a good old school look.
Og 16x12’s and 35s would look awsome. Nice work man!
16:43 could be camera angle but it kinda looks like the rear axle ain’t centered in the opening just figured id mention it bc it could cause issues when you go to a big boy tire. I know some lift blocks have off center alignment pins. Larry looks dope btw keep ‘em coming.
I saw that too, I'm glad I'm not the only person who saw that.
the shorty headers for the ole 2 valve 5.4 would wake this truck up and make it sound like a beast Shorty headers are a must
I have been waiting for this video since the first time I saw ol larry great job man
loving the squat
Larry looks good
Such a badass truck. New front end grille/bumper swap & complete respray would be🔥🔥
We need Larry chopping too!! Maybe a cam for Larry? Been watching for years always loved your videos and Ole lare bear💪🏼💪🏼💪🏼
35x14.50 Boggers on 15x12 bullet holes.👌
Done put ole Larry in the clouds. 😮. I dig it man.
Looks perfect maybe biggest tires now all that’s left is to go mudding
Larry is lookin good, I’m more of a Chevy guy but he looks good. Can’t wait to see what wheel and tire setup you go with.
Gon be looking so good luv Larry's upgrades he looked better before but even better now🔥💪🏾
Looking awesome! don't go higher
Love seeing you include Lauren in the vids! Keep the posts coming brother, I watch them as soon as they release
My 10th Gen wants to be living like Larry, looks awesome man 🤙🏾
Just throwing this idea out there. I think you should do a giveaway with Larry after you get it completed! 🤷🏽♂️ 25-50 dollar mystery boxes one box has the keys. That would be pretty cool.
Duuuddddeeee, this has gotta be the best Larry has ever been. By far my favorite so far. I hope sides are in its future 😅
I went with the 5” lift but my wheels have negative camber and are adjusted to the max they can go, did u do anything about it? Change upper control arm?
26x14s would be insane. I say find some 22x12 or x14 forged wheels that fit that lug pattern and run some 35 boggers would be sick
I just bought a kit and it came with break line extensions, if you get any id love to see a how to video, keep up the larry videos 🔥
Looks awesome man. Sitting perfect
Gotta find a set of 16.5x14 welds with 35x16 boggers
Looks good brother!! BFTough!!
39.5 swampers on some old school wide welds would be 🔥
Love the vid keep up the great work #straightpipelife
Man I wanna learn how to do my own work. Clean truck
I think you should put ssr swampers and bullet hole to keep it classic.
CHASEEE, amazing video.
I thoroughly enjoyed this upload, Good job man 💪🏽💪🏽🔥🔥
Beadlocks with 37’s would looks sweet
I wish you would do a ram build
37in mud grapps wit 20in 2016 stocks would be 😮💨
I will forever be on the search for this fabtech lift 😅
I just bought one at a junkyard
Trying to find this lift, is it discontinued?
Sickkkkkk bro!! So happy for you man keep up the badass content!
The squat looked so good though 😢
Forsure gonna have to regear to some 4.33’s or 4.56’s to keep your transmission from burning out
Yea only gonna be at 5k rpm at 60
Where did you get the spindles from?
I really like the idea of a small, wide wheel and some graps
Also, at 0:00 is a phrases I’ve never heard before
Okay this re earned my sub. I refused to be following a squat queen. Lifted Tahoes a rough one but atleast it’s not a massive lift on dumbass big wheels
Do you have aftermarket control arms on as of when you put the lift on??? Tried to put coil overs on my 2000 2wd and it wouldn’t clear with my stock uppers.
Leave it squated pls bro
I think the old school look would look amazing on it
I say do an old school style look. I think all the options you said would be sick. But I think some 16x12 or 16x14 or even a 16x10 and go really big on tires would look sick
Beautiful truck❤
Larry is clean SON!
Chase you should put those stocks back on Larry for a video it looks cleannnn.
Love Larry man def gotta say no to ex comps on it tho
16x10 or 12 on 38s on mud graps
Old school with 37s no doubt 🤞🏼
She’s so beautiful😍😍😍😍
Great video what kinda of exhaust would you recommend for a Dodge 1500 4.7 v8 I have dual exhaust on it now but just want it a little louder
16x14 bullet holes 👌🏻👌🏻
Nice hey man where can I get that impact looks really handy?
Needs the tsl swampers
If you could you can put Step ladders on there if you want to the ones that come down luv larry🔥🐐
Hey sir all lift kits make the front end more wide than the rear???
For future reference it’s a lot easier to lift the truck from the rear diff, undo the u-bolts then take two pieces of wood (like the one you stacked on the jack but bigger) and put them under the leaf springs on each side of the wheel hub then lower the truck onto those blocks it will then separate the space you need to remove the old block and replace with new one then Jack the axle back up to put ubolts back in. ALWAYS jack the truck from the rear diff when changing blocks and do one side at a time it will avoid messing up rear alignment.
Larry’s really giving me prerunner vibes so I think it would look sick if you went with a prerunner style wheel and tire setup
Did I miss the part how you fixed the spindles?
Put Baugher’s on him bro. It looks amazing.
hey men, can you tell me where did you buy this kit? i have a truck similar and i like the results
i think if you put a wheel spacer on the onther end to bring the wheels out the same as the other end it would look really neat
Lookin good brother 🤙
Larry sittin pretty a set 14 wides would tie it together
Bro I have been waiting forever for this video
How big of wheels and tires can you go on larry with the new 10 inches lift
Great video trucks looking good
Spoiler at the end? Lol looking good it needs some slightly bigger wheels like some 18" wheels on 34s. Keep up the good work!
12 wides on boggers or 16s and 38 Grapps have my vote👍
I think you should definitely do a og bullet hole setup. 16x14 on 35” boggers
old school setup would be so nice i like the bogger idea/interco tire idea but also would love to see it have some 24 or 26 reps and gladiators
Looks like larry is ready for 37s on stocks
brooo i’m loving it!
Yes find some 12/14 wide welds and throw them on there
The inner wheel seal behind the inner wheel bearing should be a press fit into the rotor/hub assembly. I don’t know why yours seems loose and staying with spindle unless it’s the wrong seal for the rotors/model you have. It should have to be pressed or tapped into place on the back of the rotor with a seal driver and hammer, retaining the inner wheel bearing too.
I'm glad someone else saw this too
@@Timetractsdotcom curse of being a mechanic and working on thousands of trucks over the years, stuff like that stands out haha
@@MikeOn2Wheels it sure does! Just wait for his hubs to start leaking grease
I think some wide welds would be bad ass
Put 24-14 on it or 26s reps splits looked amazing on it
Looks great can’t wait till those factory wheels are GONE 👍🏻
Wait so what are the parts you used and tire size? Cause I got an 2003 and I wanna do the same thing as what you did