Carbon Art Factory Talk. Episode 6: Sanding & Finishing
Вставка
- Опубліковано 28 лип 2015
- Part 1 of 2.
We enter the final stages of building a windsurf board. The crucial sanding stage - where all the previous work pays off in design accuracy.
Website: carbonartwindsurf.com
Facebook: CarbonArtWindsurf
Music: 'When The Gorilla Get Grip' by The Gene Dudley Group
thegenedudleygroup.bandcamp.com/
Courtesy of WahWah45: WWW.WAHWAH45S.COM
Film n edit by: spore*
Website: spore.co.nz
Facebook: SporeDesign - Спорт
For some car parts I've made I'm really struggling with pinholes on the carbon causing tiny craters in clearcoats. What epoxy primer with the pore fill would you suggest to potentially fix this problem?
Thanks for the great videos!
Could you please identify the pore filler and sandable epoxy primer that you use? Thanks!
Awesome content guys! If possible please could you elaborate more on the sanding coat. I’m making my own board and I’m trying to figure out if it’s the same epoxy used for lamination and the ratio of micro bubbles/spheres as well?
Hi David, good to hear your building your own board, lots of fun and rewarding I'm sure, so we use the same resin for sandwiching/laminating and sanding with different additives to make it specific. The amount of microlight/bubbles just depends of how much filling you are looking for, less is easier to apply but obviously a thinner build. I generally use less microlight/bubbles on the deck and rails versus the bottom as want better fairing on the bottom.
Looks great, what paste you said? To close all pin holes
Which porefill paste are you using? I tried carboPutty for a small carbon part I made myself, but wasn't that happy with the result! Great Videos btw!
+skwerl13 Hi, glad you're enjoying the vids! The product we use is an Akzo Nobel product called 281c
+CarbonArtWindsurf Thanks for your answer, will definitely give it a try! Please keep up posting those vids.