Bjarne you have been cutting in cedarland the last few weeks with there being so many very large specimens. You are always up for the challenge of each giant cedar specimen.
Hey Bjorne , buddy I have watched you for a long time. I am always amazed at your experience and how it shows. Those big trees don’t bother you, in fact you take that challenge with a big smile like it’s just another tree. Even though it’s nine foot base is huge. Good job buddy. It’s a pleasure to watch your video. Thank you. 😊😊
Noicce work Fella, that was a unique daring shot from the GoPro of the first Cedar falling from inside of the undercut. Cheers for another swish reel Bjarne, looking forward to watching you fall that huge tree you have coming up...
I was thinking to myself, the saw isn’t cutting as well in this video. Then you made the same statement and the need to file the rakers. Thanks for the great videos, they are educational as well as entertaining. The saw appeared to run better on the backside of the first tree. Did you touch them up during the video off camera?
Phenomenal cedar product a guy would be glad to make a roof or sidewall from those. Im sure some mill would use a a sawlog but there really not. Be a dream to hand split some 24 to 30 inchers
As I progressed in my falling of trees I could tell the rush I'd get in my adrenaline. The fear factor so to speak. I noticed that my fear was the most as I drove home from the woods. Coming down a grade with a loaded pickup truck. Was very scary. My adrenaline was off the charts. 😢😮😢😮 .
So what do you do with worn-out corks? Do you sharpen them? Or replace them (are they threaded inserts?), or do you just buy a new pair of corked boots?
shared and explained on my face book just what UA-cam did. hope it helps. called them out on it too. Always will I back the working people, doing an awesome job. Thank you. im here aint going anywhere.
Those are huge trees, but I remember in the 1970's seeing a photograph taken around the early 1900's in Port Angeles WA. where a tree was cut and the stump had been hollowed out and was used as the local Post Office. They had put a roof on the stump, cut a door and windows, the stump must have been more than 25 feet ( 8m) in diameter. Even in the 1970's when they had a one-tree-truck-load, the truck carrying the tree would drive through the town for locals to see it.
Gezz that is bigger than anything in the Redwoods even Saqoia. On the Portervile Indian reservation i cut a snag that was 22 foot. Close to the size as the General Shirmin. I don't think it is 25 foot.
A one tree truck load is 8 ft across. That is still very large. It seems a lot bigger next to it. Normally a healthy tree over 8 ft will be so heavy you can't log it more than 16 ft long. So they get ripped. Just think of how would you pick up a 80 thousand pound tree 8 ft across. How long would your choker be. How do you dig a hole under it to wrap a cable around it. How long of a choker for a 22 ft tree. What kind of log truck do you put that butt cut on. I want to see that truck. How many loaders do you use to pick it up. To drive a car though a redwood stump you need about 5 and a half ft hole.
17:40 I had the same thought doing the same thing, I uploaded smilar shots from inside the stumps of some huge spruce in 2009 or 10 on an old channel that has long since been deleted. I forgot how cool it looks but just make sure you take out that center holding wood or you might crush your camera like I did when I forgot to do it once.
Bjarne, is your home ON Vancouver Island or somewhere else. I’m only asking because I’m curious about transit times and hassles of getting to the logging camp where you stay for a few weeks and then come home. Because if the hassle isn’t worth it then…I’m fairly certain that you know what I mean by that.
Actually it is the heat stretching the chain for the most part allowing chips between the nose sprocket and chain. Though I suppose you could say heat is also oil =-) Or he just hasn't opened his oiler and is just going stock. Or closed the oiler for small stuff and forgot(heavens knows I have done that many times)
That as well, but in my finding and Western Red cedar that has not been a problem, but rather a bigger problem is the bar track loads up with sawdust pushing chain up and further off nose sprocket and when that happens bigger and bigger chips can get in till nose is plugged. Doesn't seem to matter what type of oil be it used engine oil or expensive "new" bar oil. So, long ago, I used used oil I pick up from wherever(have a construction guy who has lots of machines who gives me as much used oil as I could ever use). True can absolutely open the oiler WIDE open DUMPing oil down the bar and that helps, but when you run out of oil before you run out of gas.... ugg @@cameronhamer9432
Thank you for these great videos of beautiful countryside and the impressive skills you have. You make it look very easy, but I’m sure it’s anything but! I just wish you’d ditch that new microphone, or run two sounds tracks during editing. Use the camera mike for when you’re cutting and then, when talking use the mike on the body. You never talk while the chainsaw is working anyways!?! Just an idea.
Yeah I remember always falling a tree onto another tree so you don't get your chain in the dirt going underneath cutting the tree into sections. Do the sides, then cut the top then it caves perfectly...🌙🕸🎩🤘💡
hi their Bjarne just a question why do you cut so high leaving a 4/5 ft stump i can understand it on a bank to stop ather trees rolling down bank but it seems a big waist of good wood other times by the way i like
There's a doug fir where I go fishing/shrooming that measures 34' circum. Leans way out, way up over the upper Sauk river. Nowhere to stand at all on the downhill side. Could be why it was spared from the logging boom of the early 19th century. Would love to see how you would take it down if allowed. Although at this point it's kind of an icon
I must be spoiled or something because here in Darrington, WA these "HUGE" trees are all over the place so not such a rarity as you seem to think it is. However the US forest service is MUCH different than in Canada and so down here we aren't allowed to take a leak next to them let alone kill 'em so that I guess would be a rarity. Had to be quite a rush
if they have a catt face, meaning a crack all the way, they will strap it, or in this case, cedar is so valuable they will strap them to hold them together because cedar is like glass hit hard enough breaks into huge slabs and hurts the money vaule of that tree at the mill hopefully that answers your question.
I’m curious about those things myself. Did you notice that he was moving them out of the way for his saw? Either that or he didn’t want them damaged. I wonder if they would have a negative impact on the chain.
@@ToddAdams1234 I’m hoping someone chimes in. My guess is they are a safety to prevent the tree from a barber chair situation or they prevent the stem from splitting when landing hard . Can someone confirm the use of the white straps. They are in most of the videos …. Two or even three on the big trees
I presume that is one reason ( to control the barber chair ,especially the deep cat face ones ) also to keep the good marketable wood from splintering up ,due to the impact of the drop and other trees hitting them when dropping. I use ratchet straps in my tree care work for split crotches ,etc.🙂
The straps are to hold three together when they hit the ground. They split easy when they’re hollow and you on steep ground. I sharpen 2-4 times a day average.
Nice job fella. Really nice to see a Sawyer that knows what the hell he is doing. Well done. 👍 I watch so many of these with self proclaimed hacks that have no idea how to cut big timber. Especially hardwood. They split trees, pull the centers, fall them on rocks and shatter them. That really test my gag reflexes. 😂 Back in my day, we would have been fired for that shit, Or at best, sent to be choker bitch. 😅 Btw, I kept my rakers filed down so far NOBODY would touch my saws. They couldnt handle them. 😂😂
THE ONLY WAY ANY OF YOU ARE GOING TO KNOW ANYTHING..IS GET OUT THERE & DO IT URSELF..MY HAT IS OFF TO THE FALLER OF THAT CEDAR TREE..IT WENT WHERE IT WAS SUSPOSE TO GO & NO ONE GOT HURT..GOD BLESS...
he doesn't care, he sees money not a living and essential part of a complex ecosystem, he just humpty dumpty casually likes erasing something untouched by humans, that whole region should be national parks but in a few decades some stupid "environmentalists" will try and save at least 1 or 2 % of what's left like with the coastal redwoods and sequoias.. just think about it, those companies he works for fly them in with helis every day and actually fly trees out, piece by piece and still they must make a descent profit from it..
Amazing videos!! I love the big old growth. It’s a shame that we have to cut them down. I know there are valleys and valleys of untouched but at some point we have to think that maybe there is more value in learning about them and leaving them standing! It’s a shame because all this beautiful wood gets shipped over to China.
I don’t know if it’s just me but I feel so sad when watching this video. I understand that most of these trees “have” to be removed but by doing so I feel like WE are killing them. Can you imagine the stories that this trees have… innocent witnesses from the past…
much respect my friend , you got this. Be safe as always. just to say UA-cam unsubscribe me but im back, I hate that they do that so I hope others check your subs that they are to screwing over UA-cam Chanels . calling them out on a shitty job. gonna watch all your latentest to send them a FY up the wazu. lol. Here we go now. lol
Bjarne you have been cutting in cedarland the last few weeks with there being so many very large specimens. You are always up for the challenge of each giant cedar specimen.
You gotta admire the attitude of a guy who looks at a couple of monster cedars laughs and says this should be easy 😀
Thanks for filming your work, Bjarne, I try to catch them all! Work safe!
Bjarne That was cool you filming that old pacific logging truck coming down the mountain amazing they are still in use.
They don' t make stuff like that any more ! resycle , enviwomment ,
Awesome, what a great way to see tree felling.
Cutting my whole life (65 years old) and I've never seen a tape other than a Spencer. Learn something new all the time!
Been at it since 1978. I haven't either. I would even hit the saw shop a couple times a week.
Those old Pacific trucks are beasts.
I smile when you worry about camera placement because, Dude, this is awsome! Thanks for the effort and time doing this! I am just grateful :)
ITS IS A JOY WATCHING YOU WORK FINE SIR 💯
Cedar Sweet! Great schooling for us viewers! Thx
Hey Bjorne , buddy I have watched you for a long time. I am always amazed at your experience and how it shows.
Those big trees don’t bother you, in fact you take that challenge with a big smile like it’s just another tree. Even though it’s nine foot base is huge. Good job buddy. It’s a pleasure to watch your video. Thank you. 😊😊
Gotta love that rush you get when cutting a couple of monster trees down
Noicce work Fella, that was a unique daring shot from the GoPro of the first Cedar falling from inside of the undercut.
Cheers for another swish reel Bjarne, looking forward to watching you fall that huge tree you have coming up...
Go pro in the window was pretty darn cool
Echo was very cool!
Great video. Watch for "widow makers" !!!! No trees like that on the East coast. Stay safe.
Great job Bjarne
A man amongst men, keep it up. Liked the 592 Husky
I was thinking to myself, the saw isn’t cutting as well in this video. Then you made the same statement and the need to file the rakers. Thanks for the great videos, they are educational as well as entertaining. The saw appeared to run better on the backside of the first tree. Did you touch them up during the video off camera?
very cool shot from the window 🤩
Saved out to the blossom as dad used to say
What does that mean?
All the way to top or close to. Where the blossom would be found on a normal tree
More more, stay safe brother
I bet there’s some wood turning and wood art guys that would be jonesing for those “little” pieces he threw to the side.
Phenomenal cedar product a guy would be glad to make a roof or sidewall from those. Im sure some mill would use a a sawlog but there really not. Be a dream to hand split some 24 to 30 inchers
What you are cutting out for "windows" would feed my woodstove for a day n' bit ...keep my wee cabino warm as toast!!!
As I progressed in my falling of trees I could tell the rush I'd get in my adrenaline. The fear factor so to speak. I noticed that my fear was the most as I drove home from the woods. Coming down a grade with a loaded pickup truck. Was very scary. My adrenaline was off the charts. 😢😮😢😮 .
Some nice cedars. That first tree, you had me confused about what you were doing. Lol
He should explain why he had to fell these beautiful trees!
@@Francis-f1r They were in his block that was scheduled to be cut.
So what do you do with worn-out corks? Do you sharpen them? Or replace them (are they threaded inserts?), or do you just buy a new pair of corked boots?
shared and explained on my face book just what UA-cam did. hope it helps. called them out on it too. Always will I back the working people, doing an awesome job. Thank you. im here aint going anywhere.
Cool. Camera in stump view.
How's the new saw working
I just figured out what you were doing when you cut the notch out of the center of the tree,you were making a place for the Go Pro 😊
Those are huge trees, but I remember in the 1970's seeing a photograph taken around the early 1900's in Port Angeles WA. where a tree was cut and the stump had been hollowed out and was used as the local Post Office. They had put a roof on the stump, cut a door and windows, the stump must have been more than 25 feet ( 8m) in diameter.
Even in the 1970's when they had a one-tree-truck-load, the truck carrying the tree would drive through the town for locals to see it.
Gezz that is bigger than anything in the Redwoods even Saqoia. On the Portervile Indian reservation i cut a snag that was 22 foot. Close to the size as the General Shirmin. I don't think it is 25 foot.
Seen those photos as a Washington Native and been to Port Angeles about 30 times. Those were true monsters.
A one tree truck load is 8 ft across. That is still very large. It seems a lot bigger next to it. Normally a healthy tree over 8 ft will be so heavy you can't log it more than 16 ft long. So they get ripped. Just think of how would you pick up a 80 thousand pound tree 8 ft across. How long would your choker be. How do you dig a hole under it to wrap a cable around it. How long of a choker for a 22 ft tree. What kind of log truck do you put that butt cut on. I want to see that truck. How many loaders do you use to pick it up. To drive a car though a redwood stump you need about 5 and a half ft hole.
Oh! The giant trees!
17:40 I had the same thought doing the same thing, I uploaded smilar shots from inside the stumps of some huge spruce in 2009 or 10 on an old channel that has long since been deleted. I forgot how cool it looks but just make sure you take out that center holding wood or you might crush your camera like I did when I forgot to do it once.
Your saws always seem to crank on the first easy pull. Would love a video about what saws, bars and chains you like to run.
Very cool. Love watching you work these big trees.
Btw why does your chain/clutch keep jamming?
Show the food at camp. What you take with you,,etc. Repair area, etc in detail!
What a beautiful place ❤
camera quality is awesome :D
Bjarne, you should get the new Husqvarna helmet with the new design face shield. Would be nice to hear how it is. Your saw is really powerful.
Wow, some big cedars there…wish that Bluetooth microphone was better sounding with the saw.
That first tree was big. When it left the stump the whole planet went up.
Pretty cool!
Bjarne, is your home ON Vancouver Island or somewhere else. I’m only asking because I’m curious about transit times and hassles of getting to the logging camp where you stay for a few weeks and then come home. Because if the hassle isn’t worth it then…I’m fairly certain that you know what I mean by that.
Seams like the 592 could use a higher volume oil pump for those big cedars.
Actually it is the heat stretching the chain for the most part allowing chips between the nose sprocket and chain. Though I suppose you could say heat is also oil =-) Or he just hasn't opened his oiler and is just going stock. Or closed the oiler for small stuff and forgot(heavens knows I have done that many times)
@@w8stralthe oiler hole in the bar gets plugged , cedar dust mixed with oil is just like glue , you have to take the side cover off to clear it . 👍🇨🇦
That as well, but in my finding and Western Red cedar that has not been a problem, but rather a bigger problem is the bar track loads up with sawdust pushing chain up and further off nose sprocket and when that happens bigger and bigger chips can get in till nose is plugged. Doesn't seem to matter what type of oil be it used engine oil or expensive "new" bar oil. So, long ago, I used used oil I pick up from wherever(have a construction guy who has lots of machines who gives me as much used oil as I could ever use). True can absolutely open the oiler WIDE open DUMPing oil down the bar and that helps, but when you run out of oil before you run out of gas.... ugg @@cameronhamer9432
OR ADD SOME TURPITINE TO THE CHAIN OIL...
Thank you for these great videos of beautiful countryside and the impressive skills you have. You make it look very easy, but I’m sure it’s anything but! I just wish you’d ditch that new microphone, or run two sounds tracks during editing. Use the camera mike for when you’re cutting and then, when talking use the mike on the body. You never talk while the chainsaw is working anyways!?! Just an idea.
I think they looked their best standing!!!
AND MANY THANKS FOR THE VIDEOS...
Well done brother 👏👏👏👏
So: 300ish years old since those ones are open grown?
Beautiful echo off the mtns BJarne
Yeah I remember always falling a tree onto another tree so you don't get your chain in the dirt going underneath cutting the tree into sections. Do the sides, then cut the top then it caves perfectly...🌙🕸🎩🤘💡
I am curious to know how you carry them to workshop ?
hi their Bjarne just a question why do you cut so high leaving a 4/5 ft stump i can understand it on a bank to stop ather trees rolling down bank but it seems a big waist of good wood other times by the way i like
How often do you have to change clutches and chains?
There's a doug fir where I go fishing/shrooming that measures 34' circum. Leans way out, way up over the upper Sauk river. Nowhere to stand at all on the downhill side. Could be why it was spared from the logging boom of the early 19th century. Would love to see how you would take it down if allowed. Although at this point it's kind of an icon
Sounds like it’ll needs springboards
Don't see many fallers using the Humboldt cut. That seems to be more economically sound.
That's an upgraded 592
I must be spoiled or something because here in Darrington, WA these "HUGE" trees are all over the place so not such a rarity as you seem to think it is. However the US forest service is MUCH different than in Canada and so down here we aren't allowed to take a leak next to them let alone kill 'em so that I guess would be a rarity. Had to be quite a rush
We have cut all ours down already. Canada has way more old growth then we don't this point . WA Dosent really have much left in comparison
I love saws. I love saw vids. I use saws on trees.
I AM ALWAYS SAD FOR THE TREE.
Illinois says I still ain't shit after this work....its time for m3 to come back to work😂
What’s up with the straps on the tree?
Probably to help prevent them from shattering when they hit the ground.
if they have a catt face, meaning a crack all the way, they will strap it, or in this case, cedar is so valuable they will strap them to hold them together because cedar is like glass hit hard enough breaks into huge slabs and hurts the money vaule of that tree at the mill hopefully that answers your question.
Why don't you hollow one of those big trees out. Make it a small livable cabin. Like they used to. I seem them in the woods. Now!
What are the white straps above where he cuts ?
I’m curious about those things myself. Did you notice that he was moving them out of the way for his saw? Either that or he didn’t want them damaged. I wonder if they would have a negative impact on the chain.
@@ToddAdams1234 I’m hoping someone chimes in. My guess is they are a safety to prevent the tree from a barber chair situation or they prevent the stem from splitting when landing hard . Can someone confirm the use of the white straps. They are in most of the videos …. Two or even three on the big trees
I presume that is one reason ( to control the barber chair ,especially the deep cat face ones ) also to keep the good marketable wood from splintering up ,due to the impact of the drop and other trees hitting them when dropping. I use ratchet straps in my tree care work for split crotches ,etc.🙂
What are the straps around the trees for and how often you sharpen the chain
The straps are to hold three together when they hit the ground. They split easy when they’re hollow and you on steep ground.
I sharpen 2-4 times a day average.
That saw sounds a little lean.
That sounds like a Donnie build
Good... from Malaysia 🇲🇾👍🏿
What kind of axe is that? Thanks for posting! I learn a lot from your videos!
Thanks for watching. It’s just a generic axe from the local saw shop
Husqvarna 592 or 572?? looks like 592, right??
Nice job fella. Really nice to see a Sawyer that knows what the hell he is doing. Well done. 👍
I watch so many of these with self proclaimed hacks that have no idea how to cut big timber. Especially hardwood.
They split trees, pull the centers, fall them on rocks and shatter them.
That really test my gag reflexes. 😂
Back in my day, we would have been fired for that shit, Or at best, sent to be choker bitch. 😅
Btw, I kept my rakers filed down so far NOBODY would touch my saws. They couldnt handle them. 😂😂
why would a powersaw lose its compression? My 365 husky lost it compression.
B tarde, vc executa um trabalho maravilhoso muita eficiência. Tbm sou operador
Any ideas how old this tree was?
Bjarne you need a droan for your falling shots.
Stump cam.
THE ONLY WAY ANY OF YOU ARE GOING TO KNOW ANYTHING..IS GET OUT THERE & DO IT URSELF..MY HAT IS OFF TO THE FALLER OF THAT CEDAR TREE..IT WENT WHERE IT WAS SUSPOSE TO GO & NO ONE GOT HURT..GOD BLESS...
Awesome.
I wonder how old those trees were.2,3hundred years old?maybe order?
he doesn't care, he sees money not a living and essential part of a complex ecosystem, he just humpty dumpty casually likes erasing something untouched by humans, that whole region should be national parks but in a few decades some stupid "environmentalists" will try and save at least 1 or 2 % of what's left like with the coastal redwoods and sequoias.. just think about it, those companies he works for fly them in with helis every day and actually fly trees out, piece by piece and still they must make a descent profit from it..
Some big berries those are Bjarne 😅
There are people who know how to come to Kerala to cut wood
Initially thought this guy was a real pro.....as the cutting proceeded I changed my mind more and more...!!!!
You sound like a real expert.
Sorry for your butt hurt
How come the guy in the background doesn’t move?
GJ Bro.. 👍👍👍
best skill
Muito bom...
Estimate age of that tree?
Older than you 😮
150 ish
600 to 750 ish, the growth rings are so small that you can’t see them properly.
Super Hero nice👍👍
Amazing videos!! I love the big old growth. It’s a shame that we have to cut them down. I know there are valleys and valleys of untouched but at some point we have to think that maybe there is more value in learning about them and leaving them standing! It’s a shame because all this beautiful wood gets shipped over to China.
mantao kawan supotr selalu
I don’t know if it’s just me but I feel so sad when watching this video. I understand that most of these trees “have” to be removed but by doing so I feel like WE are killing them. Can you imagine the stories that this trees have… innocent witnesses from the past…
😯👍👍👍
250 year old tree?
👍
GREAT CHANNEL, ADD SUBTITLES
👋🏻
much respect my friend , you got this. Be safe as always. just to say UA-cam unsubscribe me but im back, I hate that they do that so I hope others check your subs that they are to screwing over UA-cam Chanels . calling them out on a shitty job. gonna watch all your latentest to send them a FY up the wazu. lol. Here we go now. lol
Cedar trees are weird. Good smelling long lasting wood though. Sell a ton of western red cedar at my lumber yard.
The 72 ain't enough saw!
10mins 30, 592 Husky.
Its a 592, and for the record a 72 is plenty of saw.
@@Cpk20001just not for the 36” bar that Bjarne likes to run. For those I’d stay with a 32”.