@@BenBen-bv3kpесли молотком стукнуть по монтировке то ресурс ремня уменьшится до 10 минут вот смысл. 😂😂😂😂😂 if you hit the mount with a hammer, the belt life will decrease to 10 minutes, that's the point
do this at work all the time lol idc if i need a pry bar and all i have is a hammer im gonna beat it trying to get it into place for 20 minutes before you catch me walking back to my tool box😂😂
Using a blunt tool will do little to no damage to the belt like others say it will. These belts are incredibly durable, after all they run many pulley like AC, alternator, powered steering, water pump and vacuum pump off of the crank pulley. These commenters are over exaggerating about how much the belts durability is affected just because the creator decided to not follow manufacturer’s procedure and do the job in an easier and more efficient way.
I mean everybody’s talking about using a different tool. I mean if he was using his head why wouldn’t he just stick it on the aluminum part and not touch the belt or the pulley all together?
I've never seen a setup like that before. Glad I switched to the body shop. I'll still do my own engine work at home. But at least I don't have to deal with it at work anymore
What engine is this?? I’ve been a diesel engineer for 20 years and never seen that before…. Kinda wish I knew about that hack… or is it an American based engine?? Genuine question. Thanks
ua-cam.com/video/wY8o6ahImIE/v-deo.htmlsi=SH0t1_hpR_rqvH7L pulley of water pump. Friction pulley. The motor is 1.6 diesel mini cooper r56 derivation bmw n47D20. only Germans can think such things
❤❤عزیزان همکار محترم قطعات صنعتی وخودرو بسیار ظریف وحساس هستند هرچقدر در این خصوص نهایت دقت ودقیق انجام شود بدلیل کارکرد در دورهای بالا کیفیت وزحمات کار ما بسیار بهتر وامید بخش خواهد شد ...یادما ن باشد همیشه خرابی ها وگرفتاری های فنی در مسخره ترین حالت ها وقصورهای کوچیک که فکرش رو هم نمی کنیم اتفاق می افتد ...تندرست وشاد باشین❤❤❤❤❤😂
Yea typical German engineering, more parts more points of failure. What an absolute waste of engineering time and money, godforbid we put a 3/8” or 1/2” square in the mold for the tensioner arm let’s spend 1,000,000$ engineering a built in holder cuz we’re quirky.
OBVIOUSLY something they put on like maybe one car and they don't tell you what car it actually was. so I'll just keep doing belts the old fashioned way. 😂
my vehicle is made in America and not from 2024 where my tensioner actually has a way to lift it with a half inch ratchet so you dont have to do this bullshit
If I was going to do that with the tool he's using I would have pushed on the aluminum arm that's holding the tension pulley not really right in the center of the belt I don't really think that's a good idea.
Это не рулетка а механизм механического отвода ролика от шкива помпы чтобы вытащить ремень. Очень удобно. Замена ремня 5 мин и один ключ на 30. У меня такой двс
Кто таким людям доверяет машину, там рядом специальное место есть под головку 32, если правильно помню, нахрена тыкать в ремень и портить его, когда можно все правильно сделать!!!??
Мой ремень на vw пронхал 130000 км и поменял его вместе с грм. Ремни при. Этом не имели видимых трещин и т.п. здесь я не понял, что за фиксатор натяжителя. Кто то в курсе какой мотор?
People all worring about the belt, when im wondering 🤔 what the hell was stuck on the tensioner. ..
Me.too
Me 3
Me 4
Me Cinco
Cabrones, yo six 🤣🤣🤣
The life of the belt before operation is 50k km. The remaining life after the procedure is 5k km🤪
Pas tout à fait d'accord, la durée de vie des courroies est variable, entre 90000 et 120000 km suivant les nouveaux modèles.
@@BenBen-bv3kphe's just talking repair bad luck
@@BenBen-bv3kpесли молотком стукнуть по монтировке то ресурс ремня уменьшится до 10 минут вот смысл. 😂😂😂😂😂 if you hit the mount with a hammer, the belt life will decrease to 10 minutes, that's the point
Fr, I was going to say the same thing.
Ew, commie
Should have shown how you set the spring pin on the tensioner of that mini cooper.
I was looking through the comments just to see how many people knew.It was a mini cooper glad to find at least one.
I did the same thing
Is that what he’s doing? Im a new service tech. (3 years)
My motto is that I can fix it with the wrong tool faster than you can find your "right tool".
How many come backs you have clown
do this at work all the time lol idc if i need a pry bar and all i have is a hammer im gonna beat it trying to get it into place for 20 minutes before you catch me walking back to my tool box😂😂
Damn strait😂😂
Using a blunt tool will do little to no damage to the belt like others say it will. These belts are incredibly durable, after all they run many pulley like AC, alternator, powered steering, water pump and vacuum pump off of the crank pulley. These commenters are over exaggerating about how much the belts durability is affected just because the creator decided to not follow manufacturer’s procedure and do the job in an easier and more efficient way.
Процедура производителя очень сложна😂😂😂. Гаечный ключ на 30, вот и вся процедура без повреждения ремня. На этом двигателе простейший натяжитель.
С учётом того что на ремень летит песок и вода,думаю от монтажки он сильно обидится😂
Agreed, the barbaric "correct" installation of stretch belts is all the evidence needed.
No se ni que haces pero me encanta😂🎉
I have watched people use those belts to sling complete engines from a hoist. They're way way stronger than you think.
The sigh is the best part. That was the classic " fuck sake " sigh.
Монтажкой в ремень?!😳 силен мастер🤦♀️🤦♀️🤦♀️
Why Yes, I have a couple belt killer 9000 models in my toolbox too..😜
Used a kinda sharp bar to push on the belt?
Müşterinin yolda kalması için yaptı hahahs😂😂😂😂😊😊😊
Pry bars aren't sharp.
That’s what the Bentley manual for Mini Coopers says to do. If your pry bars are sharp what did you do to them?
1.6 Peugeot/Citroen
Mini r56
Еще есть такое на бмв
@@user-yc6bl2zz7q наверн с этим же мотором, 1.6
Just pull down on the belt at the bottom. The tensioner will move up 😮
This is 100% correct remember to put your belts on with something sharp and pointy 🤦
I mean everybody’s talking about using a different tool. I mean if he was using his head why wouldn’t he just stick it on the aluminum part and not touch the belt or the pulley all together?
If he had pushed it on the aluminum part of the tensioner, the car would not come back for a new belt. it's called job security..😊
There’s a nut on the tensioner that could be turned on this engine, but the way demonstrated is exactly what it says to do in the manual.
It's not about the belt it's the kill engine switch he reset
О! Всеми "любимый" Ep6 😊
1.6 or 1.4 Vti peugeot Mini Citroen
You could have used the pry bar on the tensioner arm right where the pulley meets but props for going full ass rather than half ass 👍
Oh man I remember that…. It’s a mini
I've never seen a setup like that before. Glad I switched to the body shop. I'll still do my own engine work at home. But at least I don't have to deal with it at work anymore
What engine is this?? I’ve been a diesel engineer for 20 years and never seen that before…. Kinda wish I knew about that hack… or is it an American based engine?? Genuine question. Thanks
Sto cercando di capire cosa diamine sia quel pezzo che rimette in dentro. 🤷
ua-cam.com/video/wY8o6ahImIE/v-deo.htmlsi=SH0t1_hpR_rqvH7L pulley of water pump. Friction pulley. The motor is 1.6 diesel mini cooper r56 derivation bmw n47D20. only Germans can think such things
А ключем сверху никак? 😂
Why not push on the metal part of the pully?
Oh god i recognize that goofy setup...working on a junk Mini.
$300.00 please.
Marca da chave na correia kakakakakak
Is the part he retracts back into place really to do with retaing tension pulley
Im going to find out tonirrow
That's why I'm scrolling to find out.....sure looks like it but everyone is worried about that belt.......
Молодец ты испортил новый ремень😂😂😂😂👍
С чего это вдруг?
@@user-si9do7ex1t с того друг если тыкать монтажкой в ремень то он портится !!!! А если прислушался то слышен хороктерный звук надрыва ремня
@@users-shmysersуслышал только звук отщелкнувшего стопора на натяжителе и жужжание механизма включения помпы.
Тот кто не ремонтировал еп 6 так и говорит 😅
@@alexstrogov7042 я что на больного похож🤣🤣🤣🤣🤣🤣🤣
А обязатнльно усилие на механизм через ремень передавать?
Thats called knowing your tools worth
I love tools❤
ЕР6 , на БМВ это двигатель тоже используется . Говно редкостное, хватает 150000 пробега .
Is this the 1.6 that BMW uses
What kind of car is that?
Belt sure doesn't have much room next to the oil pan, no matter what kind of tools you use
What was thingy thing on top of the pully tho?
Mini Cooper 😊
What part is the black reel?
The Flux capacitor.
Probably would of pushed on the bracket not the belt
Schöne den neuen Riemen beschädigt bzw geschwächt 😅. Zeigt es noch Stolz im Video
Pra que serve essa peça ? ( Nao falo do tensionador)
❤❤عزیزان همکار محترم قطعات صنعتی وخودرو بسیار ظریف وحساس هستند هرچقدر در این خصوص نهایت دقت ودقیق انجام شود بدلیل کارکرد در دورهای بالا کیفیت وزحمات کار ما بسیار بهتر وامید بخش خواهد شد ...یادما ن باشد همیشه خرابی ها وگرفتاری های فنی در مسخره ترین حالت ها وقصورهای کوچیک که فکرش رو هم نمی کنیم اتفاق می افتد ...تندرست وشاد باشین❤❤❤❤❤😂
Peugeot Bmw
Ep6 PSA engine
Thank you for this...now I can look like the who knows his sh*t sometime!
Freakin mini cooper! 😢Without that gadget or pulling the engine out, this is darn near impossible
Looks like a good way to get comments
Nothing like working on a Mini
I have a flex head rachet that works unbeleivably well.
Can someone please explain this?
Это Пежо детка двигатель EP6
What Car What Engine ? I’m Calling bull
That's the "Prince" engine developt by Peugeot and BMW with the silly water pump setup.
This is a good way to destroy the belt
Yea typical German engineering, more parts more points of failure. What an absolute waste of engineering time and money, godforbid we put a 3/8” or 1/2” square in the mold for the tensioner arm let’s spend 1,000,000$ engineering a built in holder cuz we’re quirky.
Just 3 pulleys? ... Mini Cooper!
They knew you couldnt get 2 hands in there so they made a cheat
Maybe use a hammer handle or a long extension not a pry bar
What type of car? How did you install the tensioner?
OBVIOUSLY something they put on like maybe one car and they don't tell you what car it actually was. so I'll just keep doing belts the old fashioned way. 😂
Now new belt is not really new anymore
We’ll compromising the belt with a flat end pry bar don’t look like the right tool for the job.
Meu c3 ano.modelo 2011 tbm tem é muito prático. 😂😅
my vehicle is made in America and not from 2024 where my tensioner actually has a way to lift it with a half inch ratchet so you dont have to do this bullshit
Sistemin sigortası gerçekten güzel düşünülmüş ve güzel çalışıyor
Dude start from the beginning
Buena idea amigo
If I was going to do that with the tool he's using I would have pushed on the aluminum arm that's holding the tension pulley not really right in the center of the belt I don't really think that's a good idea.
I’m the mean time I bang the pry bar by a brutal hammer to make my right tools more completed.
Что это за "рулетку" вправили?🤔
Датчик износа ремня?
Это не рулетка а механизм механического отвода ролика от шкива помпы чтобы вытащить ремень. Очень удобно. Замена ремня 5 мин и один ключ на 30. У меня такой двс
Mini cooper!
Кто таким людям доверяет машину, там рядом специальное место есть под головку 32, если правильно помню, нахрена тыкать в ремень и портить его, когда можно все правильно сделать!!!??
Блять там на механизме натяжения есть грани под ключ на 30 и все , под капотом 5 минут че блять придумываете
Вот-вот, а при должной сноровке гитару без подъемника поменять можно минут за 30
Блин, опять ремень менять
pre historic
На ЕР6 ремень меняется сверху, из-под капота.
А они с низу захотели 😂😂😂
@@masterok3978на 207,только снизу.
Prince engine?
oh noo , it is a BMW !!!
Mini or Peugeot
Так это д.в. еп6.
Creative technology ☝️🌲
Well, thats a neat little feature! They should start doing that in every car!
It’s a mini cooper engine r56 there stupid designed tensioner for the water pump
Maybe a less pointy bar next time? Just saying
A butcher, not a mechanic, replaces the belt to injure it in a moment. When he did, he could push the rollers by his paw. 😅
Two minate job and a pay check later
What just happened?..🤔
Пиздец ремню)))
Чтобы вы не придумывали для улучшения обслуживания, сама ваша техника с алюминиевым блоком цилиндров, и это на пару лет езды!
Мой ремень на vw пронхал 130000 км и поменял его вместе с грм. Ремни при. Этом не имели видимых трещин и т.п. здесь я не понял, что за фиксатор натяжителя. Кто то в курсе какой мотор?
EP6.стоит на БМВ,ПСА,МИНИ КУПЕР.ГОВНО РЕДКОЕ
No one's gonna know. How would they know?
Мотор еп6
La courroie va pas durer longtemps c quoi ce pseudo mécano je voudrais pas qu il touche à ma caisse celui la
Железкой с ремень? 😂
Absolutely not right tool.
Change the belt
All those reactions from vinegar pissing internet warriors ...
The 'damage' to the belt is nothing compared to wat it is designed to endure.
Там ключ на 27 нужен и всё😅😅
what belt is this ?
What's that vehicle 😮😮
Year make and model?
mini jink