How to Pass the 6010 7018 Weld Test in the 6G Position
Вставка
- Опубліковано 25 сер 2024
- In this video, Ryan Egyub, welding instructor at Tulsa Welding School, shows you how to pass the 6010 7018 weld test in the 6g position
Tulsa Welding School was founded in 1949 by two welders who recognized a strong demand for skilled tradesman in their industry. Over 60 years later, Tulsa Welding School (TWS) has evolved into an educational institution that prepares students for various skilled trade careers with a multitude of specialties and applications. Graduates from Tulsa Welding School are trained to have the knowledge, skills and essential attitude to immediately enter their chosen profession.
To determine which program will be best for you, visit: www.weldingsch...
Connect with us:
Facebook, Tulsa: / tulsaweldings. .
Facebook, Jacksonville: / tulsawelding. .
Facebook, Houston: / tulsawelding. .
Twitter: / weldingschool
Instagram: / tulsaweldingschool
When i first broke out as a welder i worked with a guy that went to Tulsa Welding School. The man taught me a lot and im forever grateful to the fella.
I'm a welder. On my day off. Watching you weld. Good instructions. Been welding since 1993. I never look at it as work. It's fun and they pay me. The work is driving site to site and dragging my gear to the area to weld.
Worthwhile video.
dont spoil it my man, companies see these comments and thinks its ok to pay less😂
Watching any tradesman won’t make you one instantly because it takes TIME to learn
It kind of like watching someone ride a bicycle..you cant learn by watching ..oh do at a young age before the eyes go.
Great video overall. I would have liked to see more closeups of the puddle/keyhole so I could see your rod tip movements. I would have especially liked to have seen how you put the side by side caps in without trapping slag or not tying in. You did a fine job otherwise. Hanks for taking the time to make this video.
I love to watch welding tutorial. Thank you for sharing. Im a beginner and want to learn more techniques.
I have no idea what you are talking about, but I had to weld 3 to 4 inch gaps on the foundation for the head saw for a double cut saw mill turning over a million board feet a day. It took me 8 hours to weld in those gaps. My welds never broke wether they were upside down, vertical, horizontal or at angles. No one I worked with would have understood these terms. I welded sheets for sawdust, trusses for the floors, bearings, angle iron paddles, safety guards and all the tracks and beams for the floors and supports. I have loads of slag burns and even set my crotch on fire once making a truss. I think it is great somebody is explaining what’s going on. In those days you just did it. If you couldn’t do it you didn’t weld.
Tulsa welding school should go to welding school!!!!
lol
I remember my dad practicing for a test to weld on nuclear subs way back in the day.
What a test
i teach welding at my company ..not easy finding new kids that want to weld ..this trade is in trouble big time.
Great video thanks for sharing that with us in the 🇬🇧 UK
I noticed that you keep stop/starting at the same position with each pass. Shouldn't you stagger your stop/starts to avoid any chance of a weak point or leak?
After I asked the question 3/4 the way through the video, you mentioned staggering every time you stop/started!
I always stagger my stop and starts even when Tig welding on a 6g you've always got to start at the bottom and work up so you can just dress your stop and start back before arcing back up then burn into it
💯
I love the the slag just peels right off after a good weld
This was the most physical test and work i ever did.
This is a great job..
The way you explained the welding procedure is the way it's done. That be the way I was taught in trade school. And while testing you could only use a hand wire brush and a chipping hammer. No grinder with a wire wheel. X-ray qualified on 1 1/2 inch with a 1/2" hole pipe tig carbon steel test. Purged stainless pipe high pressure vessels building a company in Niles Michigan I'll just say they build a lot of hot water heaters. I worked in there specialty tank division.
You should get in the habit of unplugging your grinder when your changing wheels. It'd a good thing to pass to your students as well.
I've watched a guy taking off a sanding disk with gloves on, it was a dead man switch that was missing the little slide that requires you to move before pressing the switch down. As he was trying to remove the disk he hit the switch on accident and it grabbed his glove and broke 3 of his fingers as if they were pencils. Be safe man!
The trick I learned (to avoid safety and to save time) I put my finger under the trigger so it can't depress. Obviously that only works on some grinders though
Or just keep youre tools in good working condition.. it broke his fingers because he was cheap and didn't keep his tools up to par
Thanks - Great video
Good video, I like what you say we dig a hole then we fill it up unique and well said my friend!
And I also remember when I worked for a pipe fitter he would put a copper spacer wire between pipe bevel and bevel on fitting, but that was with pipes on roller stands and I would tack weld them then send to welders
great video! i’ve watched it twice now lol
would have put some closeups between root, hot pass, fill & cap tho; that woulda helped even more
Where in the USA is this school please
@@senorbrown8684 no clue
I really enjoyed your video! Never seen before this kind of welding mask before here in Bulgaria (Eastern Europe) but I like it very much! Just one question- the lenses...are they solar or a passive glass? 10x for the educational video, it was helpful in many ways!
They use any 2”x4.25” lens. Everybody uses something different and both have their place, looks like he’s using an auto lens in his.
Great video. Very informative. Hey what hood are you running there?
Thanks for properly training peeps
My problem was the cold weather so the next reweld i do I'm baking what i need to in hot wood coals then once its glowing orange start to weld it once more this time it'll work better
Nice welds for a big guy interesting technique some can keep a good position depends on your body shape comfort fitness. welding is a lifestyle not a choice
Looks like you are working on a cementer.
I used to be a welders helper in Houston. I wish I would of stuck it out.and became a welder. If I remember we used a 6011 rod a lot, is that a common type rod? It's been about 20 yrs. Ago, so I might be wrong
If I remember correctly, 6011 is really good for blowing through crappy metal. It also puts off an enormous number of sparks. Like that stuff will light you up. So if you remember it being that way and the guys you were helping were welding on some old metal, it might have been 6011.
I haven't welded at work in several years. I know I still see 6011 rod on the shelves, but I think all the guys have gone to using 6010 simply because it doesn't rain on you as much and I think the welds are similar. I think they'll lay their root pass with 6010 and then cover it up with 7018 and it looks really good.
(There's a good chance I'm completely out to lunch on that stuff, since I haven't done it in years, but I think that's what I remember. haha)
Great 6G video!
Video needs close up of actual eye hand techniques and each finished weld deposit.FYI Good Job 👍 Stess burning over you're arc marks to prevent Porosity ! Arc Marc's will show Porosity on the film, everytime..Don't be victom of something basic as this. WELD WITH CONFIDENCE! Have a Blessed Day !
I would love to try weld in US, im from Sweden and i can hear the difference when the stick Burns, sounds totaly different.
Keep the rod pointed to the high side or you will undercut the top
I wish my non welder brain knew what this meant
I sure would’ve liked to seen the bead
Nice video You need to incorporate b-roll in your videos, for more detail shots. Please 🙏
Question... Why do you change rods of the same kind when there is still a lot of them left?
Thank you.
He wants to make sure he can finish the 1/4 with out stoping! The less re- starts the better.
@@biggetl1319 Oh I see! Thank you!
great quality video boss, and great job cheers
Great stuff sir.
Salut cher professeur je suis in soudeur depuis des annees sincerement je peut boys dire que vote instruction m'a beaucoup aide au point de vu de technique mes felicitations
slick bro
Downhill is life 😁😁😁
So i do my own schooling if it dont hold try again
When I went to welding school we did vertical up for our certs for structural. When I worked for a boiler service company we did the 2" 6g test vertical up. Question is why do the pipeline guys all run downhill in the field?
I'm no expert but I've always assumed pipe lines are higher volume lower pressure. Thats why they use special rods for down hill welding! Maybe anyway
They shouldn't be doing that because I doubt the procedure was that way
@@Then.72 6g vertical up qualifies you for all other positions. Downhill does not.
@@bsquadrider ASME9 6G covers the welders for the pipe sizes they have tested on and they can also weld in any position. You are watched while you take the test to make sure you don't cheat by turning the pipe etc and welding vertical creates more penetration than welding downhill hence why it's done that way also the weld procedure requires it to be done this way.
is the low carborn rod wet
He even threw on the helmet to grind it off😅👍
6010, thank you Lord
And you don't have to drag that Rod 100% of the time depending on your machine and its capabilities you may be pushing that thing to the most extreme angles you can imagine
how can you get a job as a welder in the USA? I am a citizen of Russia
Super wall 😂😂 and don’t step on your wire lol
Can i just say im from the uk a 6g is a simulation of a in place weld thats why its in the position or if its because its hard to get you do a 6gr which is the same but a restriction plate around the full butt might be different in us but just a different opinion
I don’t need to be a good welder, just a good grinder. 👍
I feel that! still, im always trying to perfect my welding because not having to get the grinder out saves hours of time
Weld it on thick, grind it slick!
Приезжайте в Россию и Вы поймёте кто настоящие мастера в сварке.
Lol a little grinder crazy lol
On the second quarter (3:54) your rod angle was WAY off! Also you throw away 3/4 of each rod on the jobsite, you won't be there very long. None of the tests i have ever take allow you to use a grinder. 37 year UA welder
If not rig the root.....then 6018 run out......my #863...242...5346.....cert welder.....been welding since 88.....certified since 96.....boilermaker also......i know sum trix
NO PROBLEMS
- Can I take a 6G test too?
I noticed a lot of holes in your beed after you grinded! You can see that light flashing through!
What type of electrodes do you use?
yes
@@eduardosampoia5480 what electrodes?
@@viorelscrob6391 cmon bro idk barely watched but 6010 and 7018 probably
I will mig weld it
grinding outside the bevel cut it out
Sizzling Bacon
Welding doesn’t pay shit in Colorado. Plus my buddy who’s been welding for 20 yrs had to stop because he got issues with his elbows from hold that position for so long year after year
2mm land 2mm gap .feather the tacks run through them. No possibility of getting caught with a crack in your tack. hope he's got some cotton in his ear so he don't get a hot spark burning through his ear drum.
If your not covered up everywhere with 6010 our laying a good bead. It'd guaranteed some hot slag going to burn you somewhere. You jump fuck your bead up in school I just wanted to Tig I was too old for company to hire me as a pipe fitter.So I didn't do to much of it. Some people are naturals been there 6 months doing 6G pipe overhead wields. I'm barely passing 2 G. Like I had Parkinson with the rod.Year program. We didn't get to Tig til ,2 months left. Then the Tig. Now you got to three things. I could never fluctuate the pedal right So I'd mash it control the bead with speed. I'd run out of rod or get to end of the world pull the touch forget to take my foot off the mashed peddle. Zap the shit out of my hands. Wish I had more time to use it nice water cooled Miller unit.
В целом нормально но не видно сварочную ванну и что он там варит и движенния электродом не видно.Только в общих чертах и все.
I love welding but unless you work for yourself your lucky to get $25 an hour. Most places laugh at you when you ask for even $20 an hr.
Ill stick with my $95 an hour.
That's people who don't do their research. I'm a pipefitter, and our union welders will usually get foreman wage. $56/hr, more if you negotiate well
If you're doing production mig (anyone can do it) but not on pipeline or one off tig, what do you do for your $95.
25 an hour is structural pay. 20 an hour is helper pay. 30+ an hour is pipe pay. Plus per diem. Anything less is unacceptable. Find a better company to work with.
The whole full penetration thing is mostly hype. Even if you vee and butt it up a weld of that size will hold any conditions that are likely. If a pipe or weld breaks it will be because of excess vibration or stress. That requires vibration damping
No root close up
Craig Bosko lol I’m a marine pipe welder Not a pipe liner we don’t Mig weld pipe on ships and tig welding pipe is my go to starts and stops when you’re in a tough position are necessary not an issue it would be easy did not have starts and stops if you’re standing in the middle of a field Welding a pipe that is 12 inches and up
This video doesn’t simulate a pipe line weld in any way shape or form so you bring a pipe line weld into play is irrelevant I also carry more x-ray qualifications than almost any pipeline Welder I am more diverse than any pipeline Welder and I can weld more materials in any pipeline Welder
Ryan Egghead...Woopdeefreakindoo
I hope your welding is better than your punctuation skills super man.
@@Firebird400 you can tell the guy doesn't start and stop...look at his one sentence paragraph...😂😂😂
BOILERMAKERS TRAINED ME, RETIRED.
NEVER lift your grinder off the project while the wheel is spinning.
Uphill... that sucks
Id run a 6011 fast freeze electrode first
he uses 6010 5p+ which is for this
No need wasting time with stick if you plan on doing structural as it’s only used for pipe and pipe welders haven’t moved beyond stick yet and it’s all they know.
Good welders but he needs some serious help in teaching he did not once show any of his passes close up of his welding which leaves me guessing wtf he is talking about
Yeah we okies don’t fuck around when it comes to welding.
Then a 7018 run out
points taken off for not quartering the pipe =\
Lost in the first 45 secs of tech babble. I just stuck a stick in and puddled up.
You are left handed
Seems like he’s wasting a lot of rods being partially used
You don't worry about that on a pipe test, the less starts the better.
All that wasted rod, also notice he's not switching hands.
Am I wasting my time welding pipe with my left hand?
If you can do it with one hand why use both
No you are not, it pays off to learn both hands mainly in significantly less number of very uncomfortable positions, just because you cant see or cant reach. I don't think that any of those rods are wasted, that's clearly an experienced welder so he might use them for anything, on the other hand its a school so he doesn't pay for them himself ;).
If you want to become a "BETTER" educator, I advise you to slow down in your talking, you are too rapid...forcing your students to grab every word quickly, lowering the possibility of their comprehension levels.
long hours and crap money , waste of time learning
I've seen pipe welders weld pipe and they don't have as many stops and starts as you do and they don't reposition themselves everytime they blink their eyes.You would not make a good pipeline welder.You stop and restart to many times.Id like to see you mig weld pipe,8",sch 80 or tig weld pipe,sch 80 or 100 root pass all the way out to cap,stringers only with tig.The bottom line is,too many stops and starts just to reposition yourself, there's no reason for that,like I said, there's pipe welders out there that only stop for one thing,to get a new rod but not to get into another position each time they blink.Thats pretty bad.ILLgive you a thumbs up on the root pass,1/8th-3/32nd fantastic idea,excellent,my hats off to you but the rest of it,no.
This is a great job..