@@kheat693 Ok I did something similar to this before I could figure out how to put it in brake services mode i made the same mistake and tried doing this after I had already disassembled the rear brakes. I almost blew out the piston luckily I have someone watching and i stop before it could blow, but they did over extend. After all that I got all the lights come on probably because I had just over extended my piston (border line blew it out) I then tuck of the electric parking brake motor and winded the piston back , cleared all codes and they never came back. Know everyone reading this YOU CANNOT PUT IT IN BRAKE SERVICE MODE IF YOU ALREADY TUCK EVERYTHING APART…..TO LATE KNOW YOU HAVE TO DO IT MANUALLY OR YOU WILL BLOW THE PISTON that’s why I said in my other video if you already started taking everything apart you can’t do this anymore you will have to do it manually removing the electric parking brake motor and wind it back in by hand. Watch this video to do it manually ⬇️ ua-cam.com/video/Jpd91tSyL9k/v-deo.htmlsi=gHy9UTlL1GgwUAv7
Same thing on my 2019. My buddy said last fall that there was enough pads left til spring. That wasn't the case so I ordered Detroit axle rotors and pads
Finally a solution that works for brake service mode. Now if there was a solution for brake percentage reset without an expense scan tool that would be nice
Yea so I called the dealer they want $171 dollars just to rest the brake pad life 😂 yea right I just disabled it the point is to do it your self and save some money then you want me to pay to rest the dumb percentage, not this guy haha I’ll be posting the video of me changing the brakes soon the hard way I only figured out how to do this after I was done changing all the pads because I kept messing with it
Tha ks for this vid. Just subbed to your channel so any videos you feel would help others out on maintenance for these trucks please upload them.Greatly appreciate by myself and many others im sure.
Might be a repeat queation: the dealership said i cant change the brakes without a computer tool for im guessing the brake service. Does this apply to both front and rear brakes or just the rear? Thanks again
You can do both your self just have to put the vehicle on brake services mode to do the rear you can see my video of how to turn on brake services mode
so this means i can change my rear brakes without taking the electric motor off, or without the tool you used to spin the cylinder? not even a scan tool with EPB mode either?
That’s correct this should allow you to compress the rear pistons so you can fit the new pads on without the tool or removing the motor. No scan tool either because your manually putting it in Service Brake Mode when you press and hold the button for 16 seconds. Let me know if all of this works for you so we all know if it’s accurate or not. I wasn’t able to find out because I didn’t put my truck in service mode so I can’t say this 100% works. I only found out how to put the truck into BSM after I did the job and researched online.
Hello, how can I activate the service mode to be able to carry out work on the Adblue system since I have changed the Adblue pump and to be able to do the reset it asks to activate the service mode
Nope, the flashing brake light went off after I pushed it one more time and then I did it again. Tried it again and it went off without pushing it one more time but it don't work on my 21 Chevy. I guess I'm going to try it again though
did all that and changed front and rear brakes. When i came back out i reset the pad wear and only the back reset . The front did not. I dont know how to reset the front it wont let me.
Same here , dealership didn’t know how to fix it I’m guessing maybe a bad sensor was installed or I fried something and the module tripped out reading the life going backwards Just did spark plugs and again all lights back on lol f-@:$:)
Do you have to take the motor off to get the caliber off to replace the pads? I went to change my brakes yesterday and clearly watched the wrong videos cause I didn’t think it was this difficult lol. I can’t seem to find a good video for our model replacing the pads
Hey Nathan if you don’t put it in brake service mode yes you have to remove the electrical parking brake motor then you have to wind the piston back manually with a hex socket or You can also use a universal disc brake caliper wind back tool kit I will be posting the video of how I did it soon
I went after the front brake replacement like I would on my 15’ by removing everything. Realized that they are very dissimilar and looked on UA-cam. Saw this video, tried to put in SVC mode (with caliper off) and blew a piston out of the caliper. I just replaced the caliper and bled the brakes but it’s looking like I’m going to have to take it to the dealership. TC, ESB, Trailer break, ABS; ALL malfunctioning. If only I would have gotten on UA-cam sooner
🛑🚨DO NOT TRY THIS IF YOU ALREADY REMOVED YOUR CALIPER ONLY DO THIS IF YOU HAVEN’T DISASSEMBLED!!!! Ok I did something similar to this before I could figure out how to put it in brake services mode i made the same mistake and tried doing this after I had already disassembled the rear brakes. I almost blew out the piston luckily I have someone watching and i stop before it could blow, but they did over extend. After all that I got all the lights come on probably because I had just over extended my piston (border line blew it out) I then tuck of the electric parking brake motor and winded the piston back , cleared all codes and they never came back. Know everyone reading this YOU CANNOT PUT IT IN BRAKE SERVICE MODE IF YOU ALREADY TUCK EVERYTHING APART…..TO LATE KNOW YOU HAVE TO DO IT MANUALLY OR YOU WILL BLOW THE PISTON that’s why I said in my other video if you already started taking everything apart you can’t do this anymore you will have to do it manually removing the electric parking brake motor and wind it back in by hand. Watch this video to do it manually ⬇️ ua-cam.com/video/Jpd91tSyL9k/v-deo.htmlsi=gHy9UTlL1GgwUAv7
Hey man thank you for sharing your story with us I actually did something very similar lucky I didn’t have to replace caliber or piston but now I have updated the comments and the video description because of you hope everything is fixed with your truck now.
When my light starts flashing I release the brake and push the button one more time then the flashing light just turns off. I’ve tried this a hundred times and it refuses to stay in service mode.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
🛑🚨DO NOT TRY THIS IF YOU ALREADY REMOVED YOUR CALIPER ONLY DO THIS IF YOU HAVEN’T DISASSEMBLED!!!!
What happens if you do?
What if you do
Yeah need to know this as soon as possible, I can’t get my caliper piston back in right now.
@@kheat693
Ok I did something similar to this before I could figure out how to put it in brake services mode i made the same mistake and tried doing this after I had already disassembled the rear brakes. I almost blew out the piston luckily I have someone watching and i stop before it could blow, but they did over extend. After all that I got all the lights come on probably because I had just over extended my piston (border line blew it out) I then tuck of the electric parking brake motor and winded the piston back , cleared all codes and they never came back.
Know everyone reading this
YOU CANNOT PUT IT IN BRAKE SERVICE MODE IF YOU ALREADY TUCK EVERYTHING APART…..TO LATE KNOW YOU HAVE TO DO IT MANUALLY OR YOU WILL BLOW THE PISTON
that’s why I said in my other video if you already started taking everything apart you can’t do this anymore you will have to do it manually removing the electric parking brake motor and wind it back in by hand.
Watch this video to do it manually ⬇️
ua-cam.com/video/Jpd91tSyL9k/v-deo.htmlsi=gHy9UTlL1GgwUAv7
Same thing on my 2019. My buddy said last fall that there was enough pads left til spring. That wasn't the case so I ordered Detroit axle rotors and pads
I've seen a few videos and this works the best with no scan tool , thanks for sharing this information. God bless 🙏
Finally a solution that works for brake service mode. Now if there was a solution for brake percentage reset without an expense scan tool that would be nice
Yea so I called the dealer they want $171 dollars just to rest the brake pad life 😂 yea right I just disabled it the point is to do it your self and save some money then you want me to pay to rest the dumb percentage, not this guy haha I’ll be posting the video of me changing the brakes soon the hard way I only figured out how to do this after I was done changing all the pads because I kept messing with it
ua-cam.com/video/C3KZiKMlQkw/v-deo.html
My truck popped up a message saying new pads detected and asked if I wanted to reset the meter. 2019 Custom
You can reset that from the truck
@@StevenBach1 that’s grate but not my case
Tha ks for this vid. Just subbed to your channel so any videos you feel would help others out on maintenance for these trucks please upload them.Greatly appreciate by myself and many others im sure.
For sure thanks for watching and I appreciate all the comments have a couple videos coming up 👍🏻
How do u reset brake pad life on this exact year and model after changing brakes?
Thank you for this video
Your welcome 👍🏻
Might be a repeat queation: the dealership said i cant change the brakes without a computer tool for im guessing the brake service. Does this apply to both front and rear brakes or just the rear? Thanks again
You can do both your self just have to put the vehicle on brake services mode to do the rear you can see my video of how to turn on brake services mode
Replacing both front and rear brakes tomorrow, is it fine to put it into service mode and leave it for both front and rear?
Yes no problem
How do yo reset the break pad life on these custom trim
you can't unfortunately you have to go to the dealer or just disable then, that's wat I did.
@@J.A.P.S oh okay boss thanks
so this means i can change my rear brakes without taking the electric motor off, or without the tool you used to spin the cylinder? not even a scan tool with EPB mode either?
That’s correct this should allow you to compress the rear pistons so you can fit the new pads on without the tool or removing the motor. No scan tool either because your manually putting it in Service Brake Mode when you press and hold the button for 16 seconds. Let me know if all of this works for you so we all know if it’s accurate or not. I wasn’t able to find out because I didn’t put my truck in service mode so I can’t say this 100% works. I only found out how to put the truck into BSM after I did the job and researched online.
Hello, how can I activate the service mode to be able to carry out work on the Adblue system since I have changed the Adblue pump and to be able to do the reset it asks to activate the service mode
Unfortunately I have no idea bro
Thank you!!! 🙏
Do you have to disconnect the battery?
No
Nope, the flashing brake light went off after I pushed it one more time and then I did it again. Tried it again and it went off without pushing it one more time but it don't work on my 21 Chevy. I guess I'm going to try it again though
did all that and changed front and rear brakes. When i came back out i reset the pad wear and only the back reset . The front did not. I dont know how to reset the front it wont let me.
I’m having the same issue
I just ended up disabling mine
Same here , dealership didn’t know how to fix it
I’m guessing maybe a bad sensor was installed or I fried something and the module tripped out reading the life going backwards
Just did spark plugs and again all lights back on lol f-@:$:)
Thank you so much
Your welcome
Thank you bro
Your welcome
I’m trying to figure out how I will do mine for the 2023 Chevy Malibu
You can give this a try it might work but I’m not 100% Sure let me know if it works!
Do you have to do that if your just doing the front brakes?
No
Will doing the job while in break service mode allow me to reset the percentage afterwards?
No only way to rest is the dealer or scan tool
What kind of scan tool
Like a scan tool
Not true. I replaced the brake pad sensor and reset the % without a scan tool
Do you have to take the motor off to get the caliber off to replace the pads? I went to change my brakes yesterday and clearly watched the wrong videos cause I didn’t think it was this difficult lol. I can’t seem to find a good video for our model replacing the pads
Hey Nathan if you don’t put it in brake service mode yes you have to remove the electrical parking brake motor then you have to wind the piston back manually with a hex socket or You can also use a universal disc brake caliper wind back tool kit I will be posting the video of how I did it soon
Awesome thanks! I’ll be on the lookout as I gotta do mine here shortly
Should be up in about 25 minutes 👍🏻
this video was a life saver
@@Xtravagrasslandscaping happy to help man 👍🏻
I went after the front brake replacement like I would on my 15’ by removing everything. Realized that they are very dissimilar and looked on UA-cam. Saw this video, tried to put in SVC mode (with caliper off) and blew a piston out of the caliper.
I just replaced the caliper and bled the brakes but it’s looking like I’m going to have to take it to the dealership.
TC, ESB, Trailer break, ABS; ALL malfunctioning. If only I would have gotten on UA-cam sooner
🛑🚨DO NOT TRY THIS IF YOU ALREADY REMOVED YOUR CALIPER ONLY DO THIS IF YOU HAVEN’T DISASSEMBLED!!!!
Ok I did something similar to this before I could figure out how to put it in brake services mode i made the same mistake and tried doing this after I had already disassembled the rear brakes. I almost blew out the piston luckily I have someone watching and i stop before it could blow, but they did over extend. After all that I got all the lights come on probably because I had just over extended my piston (border line blew it out) I then tuck of the electric parking brake motor and winded the piston back , cleared all codes and they never came back.
Know everyone reading this
YOU CANNOT PUT IT IN BRAKE SERVICE MODE IF YOU ALREADY TUCK EVERYTHING APART…..TO LATE KNOW YOU HAVE TO DO IT MANUALLY OR YOU WILL BLOW THE PISTON
that’s why I said in my other video if you already started taking everything apart you can’t do this anymore you will have to do it manually removing the electric parking brake motor and wind it back in by hand.
Watch this video to do it manually ⬇️
ua-cam.com/video/Jpd91tSyL9k/v-deo.htmlsi=gHy9UTlL1GgwUAv7
Hey man thank you for sharing your story with us I actually did something very similar lucky I didn’t have to replace caliber or piston but now I have updated the comments and the video description because of you hope everything is fixed with your truck now.
i'm in "total brake failure, max speed 45mph"
Tried to bleed the brakes like an older vehicle.
😢😢😂😂
I have the same problem right now ,, did you fix it?
@@jonmendo82I have the same problem right now ,, do you fix the problem and how ?
When my light starts flashing I release the brake and push the button one more time then the flashing light just turns off. I’ve tried this a hundred times and it refuses to stay in service mode.
Keeps happening to me, I serviced a couple of these trucks and only successfully put it into brake service mode 1 time.
@@SKIDMARK024I just disconnected the battery and it prevented the parking brake from engaging
Are you only supposed to do that for the rear brakes or does that count for the front brakes to?
this is only for the rear brakes,Front brakes are a piece of cake, no need to do anything just replace.
@@J.A.P.Sdoes it shut off the brakes?
@@cadenlloyd4896 this allows you to compress the piston because of the electric parking brake.
How you reset the front pads back to 100%
you have to go to the dealer or just disable them
Didn't work for me. Your process is the same as others on here, though most did not do it with the vehicle running. Not sure why mine doesn't work.
Same WHAT THE FUCK
Your trucks are haunted 😂
Didn’t work on my 3500 Hd
I don't have a key