Can you Remove a Weld Seam From Steel Tubing?
Вставка
- Опубліковано 21 жов 2024
- ORDER THE TOOL HERE: gregsgaragekc....
MATT'S COMPANION VIDEO: • How to Quickly Remove ...
NEXT LEVEL CARPENTRY: / @nextlevelcarpentry
CARBIDE BURR: amzn.to/34meuDe
DRILL EXTENSION: amzn.to/3hmnEDq
STAINLESS FASTENERS: amzn.to/2E8oyoQ
DOWNLOAD FILES TO 3D PRINT A JACKET FOR YOUR SEAMS IMPOSSIBLE: bit.ly/SIJacket
My Camera Gear
CANON 80D - amzn.to/2fuaXeG
24-70 Lens - amzn.to/2fu8XmA
RODE VIDEO MIC PRO - amzn.to/2vQACoC
Follow me on social media
Facebook - / gregsgaragekc
Twitter - / steelsplinters
Instagram - / gregsgaragekc
Visiting from Next Level Carpentry. Great project and collaboration. Good luck with the sales. (I agree, Next Level Carpentry is the best carpentry channel on YT).
Can’t think of any metal fabricator that hasn’t ran across this problem. Brilliant solution. Been a subscriber to Matt’s channel for a while. Grateful to Matt for turning me on to your channel as well. I was a welder / fabricator for thirty years. And this would have been handy on a number of projects. Still a fabricator, but now fabricate electrical controllers, for industrial process control.
Great to have you along Richard. You'll see a bunch of different stuff on this channel. Some woodworking, some welding and fabrication, a little car stuff and some machining... I get into all kinds of weird stuff!!!
@@GregsGarage just watched you make your collet wrench , and now watching you make your slapping files before heading to bed. Will be binge watching tomorrow I'm sure.
Loved watching the Process from Idea to finished Product.
I found this tool, and your channel, while watching while watching Matt's video. All I can say is......I'm sold!!!! I definitely need this in my toolbox, and do not have the patience to try making it of wood like Matt did, or the machinery to make it the way you did.
I'm here because I watched Next Level Carpentry, you and Matt have very talented skills. I cant do this stuff but I enjoyed watching and someday I might need that burring tool, thanks for posting!!!
Thanks for dropping by! I hope you enjoyed the videos. It was a BLAST working on this project with Matt.
Recieved my tool. Its awesome. The finish the fit and craftsmanship is SPOT ON... these two guys designed this and if you're thinking of building a 2x72 belt sander this tool will make the fit perfect. Great job gents.
Just mill a full length groove on the OD of the sliding part and leave the weld seam in.
Hi Greg,
as a suggestion, the jacket should be lengthened to extend forward of the cutting bit, say 30 to 50mm, so that the cutting bit maintains good contact with the weld seem right up to the edge of the tube when withdrawing the cutter in use. If the jacket is not extended the last section of weld seem (approx 40mm ) will not be cut properly as the jacket will loose alignment with the tube when being withdrawn.
cheers
Great suggestions! Thanks.
Excellent collaboration Greg and Matt! Really cool tool that does what it should.....hope you sell a bunch!
Thanks Tom!!! You've taught me everything I know on the mill.
Im sorry I'm just now seeing this one. Shame on me but I got so far behind on life during the new shop renovation. Another inspiring video. Not just the machining/build aspect but also from the product development aspect. Watching this a few months after the fact and knowing how successful this has been probably adds more appreciation to it.
You don't have to apologize Fred. You're a busy man!!! We had a blast developing this tool. It's getting ready for the second production run, so I've got my fingers crossed that there will be a few more folks who want one.
@@GregsGarage I would like to order this tool set from your next production batch, Greg. What's the best way to do this? I'm on a mobile device and won't have full web connection until next week - can you shoot me an email?
jhsellers123ATgmailDOTCom
Thanks,
John
@@GregsGarage I guaran-dang-tee ya I'll buy one. Just tell me how and when I can.
Never seen anyone remove it that way before . Looks like a good idea.
Yeah, it's an interesting concept. I could have used this years ago when I was building the trollies I used for moving car bodies around. I have a feeling I'll be using more telescoping tubes in the future.
An elegant solution for removing the weld seam on steel tubing. It's what I expect from Guru Machine Werks, though. Nice stuff.
Thanks Tom! We can't wait to get them into the hands of other metal workers and welders. It will be fun to see them show up in other UA-cam Creator's videos.
I just pre ordered the basic kit. If either of you have access to a 3d printer it might be worth it to print sleeves for various sizes on demand.
Great idea.
@@GregsGarage I just ordered the deluxe kit. I agree with Troph2 the various sleeves would be awesome! Thank you!!!
Top suggestion!
Nice! Thank you for the idea. Do you have experience with continous usage of the tool? I mean did you tried to use this tool on more ocassions? Or this is good for home or amateur usage?
I received a call back directly from Greg within an hour of my post and he assured me that the products are being made and will be shipped within the estimated timeframe presented in the pre-order announcement. THANK YOU Greg I am very impressed with your immediate call back and the information about delivery is very much appreciated!!!!
A handy tool that does something not easy to do over long lengths, the only other coment is holding the block in the edge of the cnc vice without a support piece at the other side, tightening the vice causes the jaws to twist slightly and you can loose grip on the part and it fly out when milling, not nice, a fright at least or a broken endmill, even personal injury. A simple part to make and on my list of to do items once I get my cnc conversion finished. Thanks for sharing.
I love the tool project, I had seen the video before and lost track of one of my projects years ago. A coworker had a similar problem and I sent him the link to your video. Do you sharing the 3D model of your jackets? Thanks for your great project.
Nice lights at the end! 😂 why so many? The dental light looks like an old pelton crane light.
I might try to 3d print this and maybe the sleeves; I don’t do too much of the slip fits but it seems like a fun project for my channel if I get time. Maybe I’ll add something to the build to make it unique.
I have 2 Pelton Crane lights hovering over my workbench. They are nice because they slide on rails and I can put them where I need light. I also have 2 Luxo lights. One is a typical drafting lamp and the other is a magnifier. I usually have several projects going, so I like to have lighting set up for filming and for working. I also have a couple more lights that you can't see that are just for shooting videos.
Best solution I've seen.
Interesting project and a great idea. I think a few people will want one of those Greg.
Thanks Jerry!
Clever idea Greg.
Thanks Ziggy!
You had me with;"" These Gloves are about done"" ! hahaha, Nice video
be careful using gloves around your mill - I had a friend who used to do that and it was no problem for a very long time... until one day he went to flick a chip away from the work and the mill tool caught the very tip of the glove and sliced the skin right off his finger bone. I never saw his injury in person, but his friend in the shop next door said they had to sew what was left of his finger to the finger next to it in order to provide blood flow. I, myself, had my shirt sleeve caught in a drill press once and it nearly broke my wrist (luckily I was able to reach up and hit the emergency stop, but it scared the hell out of me). Great video, just be super careful with those gloves around end mills.
Can these be adapted to tubular steel? I have same issue with ID 40.8mm
That is a great idea and a cool collaboration between your channels
Thanks! It's always fun to develop ideas into usable things... It never gets old for me.
Good work. And gloves
Looking for a file to attack welded seam or square tubing brought me to you. I’ve subscribed and I have question about cheap 3D printer looks like you eBay link is old & I didn’t find printer. I’m going to buy your tool for seams very soon but I’ve been looking into also getting a 3D printer to use with a planish hammer for aluminum. Have you ever looked into that? Anyway can you suggest a substitute for your cheap 3D printer for this beginner ….. also beginner fusion 360
Brilliant idea. Many thanks. Cheers from Michael. Australia.
Have you considered eliminating the bearings and wood sleeves by just machining a steel rectangular block for each common size of square tubing with multiple holes though the outside perimeter (like the face of a 2-3-4 block) so the burr bit can be moved for different seam orientations. I understand this would require clearing the first inch or two of the seam with a chisel and pushing the tool instead of dragging it.
Awesome tool fantastic engineering
Thanks David
Great idea! Went to your site but shows 'Out of stock'. Will you be making another run?
Ditto
Nice. Should make the jackets out of aluminum & sell it as a master kit.
I bought one, but for the first place I need to use it, I already see an issue. This device is designed to be used on the pull stroke, but the piece of 2.5" tubing I need to remove welding from is already welded in place and I don't have access to the far side. I only need to remove the seam for the first 6" and there's more than 12" of tubing. I'll try making a jacket for the full 6" with a ramp in the slot at the end. Slide them in separately, then pull the device through the jacket.
What a great craftsman !
Discovered your channel just after discovering Matt's channel. Thanks.
Will be ordering some of your great work on payday. Y'all Rock !
Now I have something else to watch & learn from besides "Donut Operator". A great channel, just a different world.
Thanks again : )
Welcome aboard! Thanks for the kind words.
I watched Matt's video; this is a great idea. What size bearing will fit the CNC version?
It's a 5/8" x 1/4" bearing. I will supply them with the tool.
I need this tool. Great idea. Just ordered.
Right on. Just saw the order come in. We started machining tools this week, so we are right on our schedule to deliver 6-8 weeks after the pre-order wrapped.
Enjoyed the video, and great idea
Thank you sir! How's the knife business. I haven't seen a video in awhile.
Greg's Garage knives are still going out the door just fewer these days, I moved up the food chain at the day job and unfortunately it actually meant less free time. Glad to see you’re still kicking out vids
Hey Greg, awesome work, seems like the tool worked very well!
Thanks Gary! Always fun to see a new idea work out.
@@GregsGarage yea, none of my ideas work out! very impressed with just how well that worked!
Is there a file to down load the does not require fusion.? Thanks
Just ordered the deluxe kit... if I wanted to go even longer what type of extensions should I buy? Does the extension it comes with have a round end or hex end?
Irwin Extensions. They have a hex. I believe it's 1/4". There is a link in the video description to the one we used. I think Irwin has longer versions as well.
Greg's Garage.... cool thanks
@@JWB671 Im gonna go examine one of my 4ft flex shafts tomorrow and see if that can be modified to work.
I bet they will.
What was the pre-order cost? It's no longer on the website
Cool tool Greg
Thanks Ron. I hope all is well in your world.
fantastic design!! When will we see one for round tubing? I have to debur round for hinges on tilt trailers
You can use a round dowel to create the "sleeve" and deburr round tubing with this design.
Did you make some bad ass anodized squares? Are they for sale, if so where?
Jeff, we only have the 2" squares right now. We are trying to fit another run of square sets into our production schedule but we have been too busy making guitar tools to squeeze them in. If you want to send an email to: support@gregsgaragekc.com I can send you an email as soon as we have a date for running the squares.
kit of pre-milled nylatron, UHMW, or other plastics to 'shim' the main aluminum tool body would round out the product offering. Then; no need for any wood shims to orient and retain the burr against the weld penetration in the rect tube. Perhaps a series of strips that need to be added to one side or the other of the tool's "shim package" would make most sense. Wrap the entire bundle, No-Seams Tool, plastic shims with a packing tape wrapper?
Do you sell the G code as shipping is not cheap and it would be nice to see if my CNC will handle it? Plus I don't wanna wait till march..lol
I'm ordering Thanks to both you guys !
🙏
Hi Greg,
Trying to get an order of the Seams Impossible done on your web site, but keep getting "cannot ship 0.0 lbs.". Maybe it's because I'm in NZ and we use the metric system? Anyway, would love to pre-order on this, the last day. No contact option on your website?
Thanks!
Ed - Please shoot me an email: support@gregsgarage.com I'll get you taken care of.
Make custom trailer hitches,great idea
Why not umhm plastic jackets? Probably got the UmHm wrong, but it is hard, slippery plastic that can be worked with wood tools.
Just came over and subscribed... I’m digging your work on the weld seam remover.... you boys definitely do some nice work!👍😁. He was right...that welders “speak” video is pretty great! ... “just need to grind that...some!”... LMFFAO!
Thanks for hopping over here! A new video is dropping in about 90 minutes!
Here's an idea to enhance it. Same tool, same plastic block but make both sides of the plastic block very thin. How you shim it side to side to match the seam you are cutting. This will handle off center seams. Once shimmed to line up with the seam, insert the screws to hold the tool & shims in the main block. Now it's a multi seam location tool.....
What about when the weld seam is not in the centre of the tube?
I just got mine. Do you have any 3D printer files to accommodate the different size tubing?
Yes. Fusion, STL and Instructions are here: gregsgaragekc.com/wp-content/uploads/SeamsImpossibleJacket.zip
Greg nice video having problems with you sight would like to preorder your weld seam cutter. Thanks
Paul, I saw your email. I'll send you a request directly from PayPal.
Have removed weld seam in 4 ft long tube with a bushing block with 4 jack screws on all sides. Used a grinding wheel instead of a burr
Great sign me up!
Thank You!
I’m thinking that prototype aluminum part could have been made faster by hand, with acceptable accuracy for the intended use
The prototype was made by hand out of wood. The CNC handled multiple revisions and refinements of the design. You're seeing the prototype of the actual manufacturing process. There is a difference in proof-of-concept and proof-of-process... I probably don't do a great job of explaining that difference in the video simply because it's not a vital detail of the story.
Suggestion... do you have enough meat in the jig so you countersink the bottom of the jig, rather than using them as through holes? That way you can use small flathead screws to secure the jacket from the bottom end and you won't have to countersink the jacket. Since most of your force is going to be away from the burr, I don't think you'd need the side holes.
The aim is to make telescoping tubes, why not use the inner tube as the jacket? Cutoff grinder to adapt tube for the 2.0 cutter.
HA! I hadn't thought of it that way... Sometimes you get so focused on a thing that you miss an obvious solution... I'll scratch my head a little bit on this one. Most of the fabricators who are going to use this are capable of welding, so if we provided a weldable U that fit snug around the tool, the user could cut a ~3/4 chunk out of the inner tubing and weld the U piece in and Bob's your uncle! I just have to work through the attachment which should be pretty straight forward. THANKS!!!
Cool machine
Thanks Stu!
make the tool longer on the toolbit side,en you can pool the tool over the whole length wurking in one go.
I have absolutely no need for this tool, yet I’m oddly compelled to consider one simply for the genius of the concept and the cool factor, lol!
LOL! I'm not going to stop you! :D
@@GregsGarage but I need it and I sign up for ordering in spring with my email address
Did you file a patent?
If you take the inside piece and barely round the edges it slides righ in
Your store link is already crashed so you may be making more of these than you’d planned 😂. What I’d suggest is also making the sleeves as a set out of HDPE or whatever would machine easily. We can all make wooden ones but I’d rather buy and be done.EDIT maybe 3D print the sleeves instead of machining.
This is a great idea. We will look into what it will take. Thanks for checking it out!
The site is back up. If you have any trouble, you can email me: greg@gregsgaragekc.com and I can send you a request directly for want you want.
I really, really want one.
If I just order the tool only, what size carbide bur do I need to get?
3/4" sphere with 1/4" shaft. This is the link to the one I used in the video: CARBIDE BURR: amzn.to/34meuDe
Anybody know where I can get a 20mm ( or 3/4") dia burr, cant seem to find a supplier in the UK.
I thing this is an excellent idea. I like it so much I have copied your concept on one I just built. I like your design however I changed mine a bit and want to share the idea with you. I made mine from a piece of 1" aluminum round stock. I kept all of your design except the material shape. In order to use the round design all you have to do is drill a 1" hole in a piece of wood with a Forstner bit versus the dado slot. If I knew of a way to send a picture I would. I have been breaching the weld out on the press using the smaller stock and a piece of HS steel method. This method provided mixed results and was much more difficult.
I build the round version on the milling machine securing the stock vertically in a v block in the vise. The biggest challenge is reorienting the stock to complete the bottom side once the first side is machined. I first drilled a 5/16 hole through to stock then used a 5/8 end mill to make the hole for the bearing. I then flipped it over and indicated he hole on the opposite side to position it. This was the most difficult and time consuming part was indicating a 5/16 hole to reorient the 5/8 hole on the bottom. I can see where it would be much more easier and faster to align it if it were square but it can be done
Thanks for the inspiration, I am in no way saying that your design is flawed I just think for me the round hole is easier that a square hole. Try it if you want I think you will like it.
I always like to hear/see folks that take what I do and make it into something that works better for them! Thanks for the detail.
I ordered one Sept 12. When will it ship?
The tools are at anodize right now. They are hoping to have them back to me next Friday, Nov 6. If they get them to me then, I will start shipping the following week. The last couple months the anodizer has been running about 4 weeks, but I asked them to rush this one. If they can't rush it, we are looking around Thanksgiving. I sent a mass email to everyone who ordered about 2 weeks ago with an update. It may have gotten trapped in spam or junk.
I have been trying to pre order one of these new tools that you have designed I have been trying for hours the try and get on to this site and trying . can you or anyone help me I'd like to order 1 of these old guy not that computer smart . HELP.
NICE NEW TOOL. THANKS
Theodore, can you email me: greg@gregsgaragekc.com and tell me your order? I can send you a request directly from PayPal. Sorry about the site being down. It's not used to having this much traffic.
When do you plan on shipping them out?
We are scheduled for a 6-8 week production time. The pre-sale ended 9/7, so we should ship late Oct / Early Nov. We still have a few slots left if you did not make the pre-order.
Amazeballs!
Right!?!?!?!
Make the jacket longer and have the burr tool recessed in the jacket this would let you go all the way thru to remove the seam.
Seems like a shaft coupling and an appropriate rod could make this useful for much longer lengths than the basic drill extension by using fewer couplings. Though at some point it might become easier to leave the sleeve and bur stationary and slide the tubing (just "thinking out loud")..... BTW I may have missed it, but what size threads were tapped?
Second thought: attach an electric motor to the burr's shaft and send the whole thing down the tube.... this could have a lot of potential uses.....
I pre-ordered the deburring tool and my account was charged on Sept 9th for the $44.00 but still have not received the tool or any information when it will be sent. I emailed Greg, awaiting response.
I left a VM and sent you an email with ship dates. Please let me know if you need anything additional. -Greg
`Abandon the sleeve concept and use adjustable guide rollers.
great video. you site is down. please take a look.
We are working on it. I've never hit a bandwidth limit before. I'll let you know when we have it back up.
The site is back up. If you have any trouble, you can email me: greg@gregsgaragekc.com and I can send you a request directly for want you want.
This in your house? Do you have 440 3 phase. Whats your compressor?
Dam must be nice to have a cnc mill to play with do you have a lathe also.
First one prototype second one refine tool. Third one production tool.
To make money you need a fixture to hold 10 to 100 parts at a time. Do all oprations to each side then turn.
You could knock out 10 000 a week. Give or take a few. Figure time labor supply and power used tool price xxx with a profit of xxx. Shipping set price 9.95 ups.
Print labels have pickups once a week.
Sell on Amazon. PayPal charge card ex...
If you make 100 the last bunch sold out fast.
Thats better then doing one at a time.
You could almost mill bar stock then part them out without a fixture.
Placing my order in the morning. September 1
Hey Greg got my order in and was wondering what size rotary rasp is this being designed for... ie SD-3 is a 3/8x5/16 ball type.
I need one! I tried the link and couldn’t get it to work.
We are working on it. I've never hit a bandwidth limit before. I'll let you know when we have it back up.
Greg's Garage Thank you! I need two of the complete kits.
Billy - The website should be back up. If it doesn't work for you, email me: greg@gregsgaragekc.com and I can send you a direct request for 2 kits.
Tried to pre-order tool but pre order link server says band width has been exceeded. Success has its burdens
Thank you for letting me know.
Building one out of SD-7 L6 D/C burr in ampco with 4 bearings, then bought your kit 🤓
Ordered mine a week ago!!! God I need that!
I want one.
We are making them now. go to gregsgaragekc.com and sign up for the notification list. I'll be sending out pre-order info in about 2 weeks.
Watching you run that machine with those gloves is like watching a homeless guy drive a Ferrari. Yeah, I’m sure they’re comfortable but c’mon. 😁
Also, nice solution to a common problem. I’ve cut 1” thick steel squares, threaded a center hole and silver soldered a hss blade along one edge. Length of all thread and a driver gets it done. I think your method works quite a bit faster and less bullish.
I'm on a tormach so maybe its more like a homeless guy driving a slightly used Honda. ;D
I do have a brand spanking new pair sitting at my mill, so no more holes!!! Thanks for checking it out.
Greg's Garage that Tormach looks like a star destroyer next to my 1920’s Van Norman #10. Glad I could help shame you into some new hand shoes 😁
You guy's banter cracks me up! 🤣🤣
make the sleeve longer with a hook/heel and you don't need the screws (for the sleeve) when pulling the tool trough the pipe/tube
I agree.
Also if it sticks out ahead of the burr it will be easier to start if you wanted to push instead of pull. Maybe you don;t need the whole length done?
Blue springs? Humm.
You know that job shop was in kc.
But what if the weld seam is off center?
Check out 16:00 I show the off-center jacket.
It will go better for the longevity of the aluminum body if you “drill” the holes with a nail, instead of a drill bit....
Why don't you just use seemless square tubing?
In some cases it's not readily available as most suppliers carry a large variety of cold rolled ERW tubing and only a few variations of DOM. Also the cost of DOM can be well above the cost of cold rolled. To get a truly seamless tube, you're getting into Cold Drawn tubing $$$.
Kool
🤔*Did I set the Z coordinate to 5 decimal places?*
YES, yes I did.
Ok how many crashes?
When i worked in a machine shop everything was programed on a punch tape you feed into the machine.
I got the pleasure bit of sarcasm to watch the mill department Forman doing a set up once after feeding the computer the program hed forgotten to change the vertical stops on a monarch mill the head plowed down at the table with the tool holder and crashed causing in 1979 1980s prices 10k worth of dammagd to one of our 4 machines. That wasn't the only crash I've seen ive seen lath operators run the cutter head into the chuck on a manul lathe or crash a cnc lathe. The poor repair guy was always working his ass off fixing shit.
It happens in a large job shop.
This is a pretty neat tool this guy came up with. It works dam good. My idea would havd milled the weld out and braced to outside back open by welding bars on then adding nuts to hold your lock downs for what he was using it for.
But it could be used for an adjustable height setting work bench or tool top.
Finally got past the bandwidth page and Norton says "Known Malicious Site" I would like the tool only as I already have the burr and extension. But going to a not just suspected but Known malicious site is not a good idea. WHAT GIVES
I'm not sure. You're the first to say that. I just checked our secure certificate status and we are all green check marks. You can email me: greg@gregsgaragekc.com and I can send you a request for the product(s) you want. It will come straight from PayPal that way. Does that sound like a better option?
@@GregsGarage let me try again. I got this message on my phone. Could have been busy and redirect caused an issue or something else. I will try from desktop tomorrow. Thanks
A little bit more than necessary
👍👍
👊👊👊
I wont to buy one but can’t order
Tony, can you email me: greg@gregsgaragekc.com and tell me your order? I can send you a request directly from PayPal. Sorry about the site being down. It's not used to having this much traffic.
Last vid
Tune in next week when we see this guy lose his fingers due to wearing gloves around a rotating spindle. Ratty gloves at that. Guaranteed to be exciting!
That's the reason there's a door! 😉