The distance variations makes it a challenge to find those previously marked pieces of cover and structure. I wish I could find the magic formula to tell me to add or subtract that 9'-18' variation. Best tool I've found is a c-rig :) Great info again! Keep these coming, please!
Hello!! I would like to ask a question about point-1! When I installed point-1 on my elite fs9, and was ready to calibrate, I found that the rate of turn was already 5-6 degrees, but my boat was tied to the shore and didn't move! What is the reason?
So using the second (rear) point-1 is a more accurate gps reading than the internal gps on the unit? I’ve never seen this before so I’m setting here questioning why dual point-1. Thank for sharing.
yes u are marking within a 1ft of the transducer of what you are seeing, if you are a weekend fisherman 1 will be fine this is more for the tournament angler
I got a new Ranger and the factory already installed point-1 on bow. I have 2 HDS Lives, one on bow and ine on console. Should setup be: both units global for heading; comsole unit on This Unit for GPS; bow unit on local Poimt-1 for GPS location?
I ran across an issue the other day with two HDS LIVE units connected to a NMEA 2000 network with a conected Point-1 and the Calibration process did not work from the Console mounted HDS LIVE. The Heading, Pitch & Roll options did not show up from the Console HDS either. I did not think to try the Calibration process from the Bow mounted HDS. Both units had the latest software update. When I tried to initiate the Calibration process from the Console HDS, the rate of turn that you would normally observe just stayed at 000 and I never got a "Calibration Complete" message. Have you ever encountered this?
I see you have multiple units. Probably 3d module and all of the trimmings....looks like they draw a whole bunch of juice. What batteries do you use? Brand, How many, Group size, type? Thx.
Amazing information Paul and well presented. I would have been lost without this tutorial. Can't thank you enough.
The distance variations makes it a challenge to find those previously marked pieces of cover and structure. I wish I could find the magic formula to tell me to add or subtract that 9'-18' variation. Best tool I've found is a c-rig :) Great info again! Keep these coming, please!
Thanks for the help! Just switched from humminbird to lowrance and it’s a whole different ballgame with the set up.
Hello!! I would like to ask a question about point-1!
When I installed point-1 on my elite fs9, and was ready to calibrate,
I found that the rate of turn was already 5-6 degrees,
but my boat was tied to the shore and didn't move! What is the reason?
So using the second (rear) point-1 is a more accurate gps reading than the internal gps on the unit? I’ve never seen this before so I’m setting here questioning why dual point-1.
Thank for sharing.
yes u are marking within a 1ft of the transducer of what you are seeing, if you are a weekend fisherman 1 will be fine this is more for the tournament angler
Awesome! Great knowledge sharing! There goes another $250.... lol
I got a new Ranger and the factory already installed point-1 on bow. I have 2 HDS Lives, one on bow and ine on console. Should setup be:
both units global for heading; comsole unit on This Unit for GPS; bow unit on local Poimt-1 for GPS location?
I ran across an issue the other day with two HDS LIVE units connected to a NMEA 2000 network with a conected Point-1 and the Calibration process did not work from the Console mounted HDS LIVE. The Heading, Pitch & Roll options did not show up from the Console HDS either. I did not think to try the Calibration process from the Bow mounted HDS. Both units had the latest software update. When I tried to initiate the Calibration process from the Console HDS, the rate of turn that you would normally observe just stayed at 000 and I never got a "Calibration Complete" message. Have you ever encountered this?
I already calibrated the front unit i need to calibrate the one in the back how do i do it
Paul, thanks for the channel. Could you tell me the name of the app that you used please? Thanks!
Magnetic field detector
@@PaulGettysFishing thanks; they must have discontinued that app. There are others. Thx
May have found it for 0.99
Wondering can you use any other gps puck antennas with a Elite ti 9?
What others are you thinking about it would have to be nmea 2000, and there are multiple from lowrance
I see you have multiple units. Probably 3d module and all of the trimmings....looks like they draw a whole bunch of juice. What batteries do you use? Brand, How many, Group size, type? Thx.
I run 5 lithiums Relion is the brand 31 series I have a cranking battery and the house battery than 3 for the TM
@@PaulGettysFishing house battery and cranking battery wierd in parallel ? Thx.
@@daveoconnor2588 on a switch /charger isolation valve the motor charges both i can use 1 or the other or both
do you have a video on this info but for a humminbird? This video is phenomenal - AWESOME AWESOME AWESOME
No sir I don't, sorry
Thanks man!
Totally confusing!
Very simple, just stop and watch and follow instructions