How to Remove, Reset and Refit TIPM - Grand Caravan 3.6 V6 (2011-2021)
Вставка
- Опубліковано 5 жов 2024
- Looking for a complete TIPM Removal Guide for your Grand Caravan or Town and Country? You've found it! Including Removal, Reset Proceedures (hard and soft) and Refitting. COMPLETE GUIDE!
USEFUL LINKS:
1) How to Repair a Loose Battery Terminal:
• How to Repair a Loose ...
VIDEO BY YOU WRENCH - Авто та транспорт
THANK YOU! my ac compressor just got replaced for $1000 and the ac still didn't work. They told me I need to replace my TIPM because there is corrosion on it and it's affecting the temp control. Dealership told me the part would cost $2650 plus HST (Canada). Watched your video and went to a Kenny u pull found the same year caravan, removed the TIPM and installed it in mine. Didn't work right away even with the soft reset, so I did it overnight for a complete reset and BOOM! AC works like a charm. The tip cost me $50! You saved me!! Thank you thank you! Subscribed.
I thought TIPMs were VIN specific! O_O
You saved me so much money. The dealer wanted $1400. I grabbed a TIPM from the junk yard for $50. Blower motor working like a champ now. Thanks.
SUBSCRIBED!!!
Thank you good sir I think you've legitimately save people across the world probably hundreds of thousands of dollars if not pushing to the seven-figure range. Nothing is affordable anymore so do-it-yourself is going to make a huge comeback. Popular mechanics modern era
great info.. for educating me, a naïve in car mechanics,, now I understand what my mechanic is talking about
An outstanding and thorough video. The dealership got me once before on this replacement. Gave me some BS about a core charge (not documented anywhere) and kept my orig TIPM. It was late, I was tired and broke; I gave up and went home. I’ve never gone back to that dealership, nor any Chrysler dealership since. My thanks to you all; I’ll be taking my swap this time into my own hands (with your help 🙏🏽). Cheers!
I've just recently purchased one of these vans. The mechanic quoted me $2,200 dollars to fix my 2013 Dodge Grand Caravan's TIPM. If I had that kind of cash, I'd have a 2023! This video is very helpful, and I will be using it to attempt to fix my TIPM. I'll update once the job is done!
😂😂 yep! My dealership said the TIPM and PCM needed replaced and reprogrammed and quoted us almost $2,200 as well and not including almost $250 just to diagnose! The new TIPM's from Dodge aren't even fixed where it doesn't happen again later...only 2 year warranty 🙄 we are replacing both ourselves and PCM with lifetime warranty for under $500! Very grateful for this in depth video!
@@togodbetheglory3353 hey guys how did it go? Were you successful?
Anyone needs to know how to do this watch this guys video My granddaughter and I watched it and then it took us 20 minutes to get the old one out and another 20 minutes to get the new one in. Great video thank you so much
Excellent video, clearly shows how all the release mechanisms operate for the 7 TIPM connectors.
Glad that you liked our video :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by hitting the SUPER THANKS option below the video on UA-cam, or by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you SUBSCRIBE to our UA-cam channel.
3) Please LIKE our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Thank you for your video. Clear, easy to follow and you identify things to key in on. I am not a mechanic and only know basics. I was able to do this in an hour without any issues or breaks.
Excellent, that is exactly what we like to hear!! Glad that we were able to help you out on this job, and hopefully you saved yourself a few hundred dollars along the way!! Any support in return always welcome!! www.paypal.me/youwrench
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Thank you for your outstanding video. It was very clear and easy to follow. I followed your steps exactly and everything worked swimmingly.
That's excellent news, glad we could help you out! Thank you for your support 👍
-----------------------------------------------
To help support us:
1) Please be sure to use our Amazon Links!
2) Please ensure you LIKE our video's, and SUBSCRIBE to our channel!
3) Donations always welcome! Hit the SUPER THANKS option below the video on UA-cam, or by PayPal: www.paypal.me/youwrench
Thank you for your support!
I just got a 2011 and we've been told it's the t.i.p.m. module. I thank you so much for this helpful video. I'm going to try everything from start to finish. I'll reply to my comment and give you an update 💯 once again thank you for the helpful info sir.. 😊
Excellent, best of luck with the changeover!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by hitting the SUPER THANKS option below the video on UA-cam, or by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you SUBSCRIBE to our UA-cam channel.
3) Please LIKE our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Having issues with my 2010 - going to try this next week when tipm comes in
Ugh, I have been waiting 2.5 months for insurance to try and get my van in a shop, but no shop is willing to do the work, even though my only issue is starting, and the dealership found it to be the only problem......gonna take matters into my own hands jusy to expedite this process. Thank you for the helpful process video. Wish me luck
This is the
The Best video I have ever seen
The Best
Very good explanation
Considering even a very little details in the system
Thank you
Best car repair video I’ve ever watched on UA-cam. Thank you so much, just subscribed 👍
Thank you very much for the video, i went to take mine apart but only made it to the battery and found that it was just a bad corroded connection 😂😅. But this is a 10 year old vehicle i have so i may need this video in the future.
I picked up a used TIPM at a junk yard today for $40 All the rest we saw on the internet were above $200. I'm hoping this one is in good working order. It sure will save a lot of money if it is.
UPDATE 3 weeks later. The $40 TIPM was defective. It was installed and every time my mechanic started my van, it died right away. He put the old TIPM back in and changed a solenoid on the front of the transmission and so far, my shifting problems seem to have been corrected.
Absolutely, for $40 what do you have to lose! It's worth a shot for sure. Best of luck with it!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
@@YouWrench My 2008 Caravan also had a bad TIPM. That one cost $65 and works like a charm. The van even seems to run better. That is the same van that was using 1 qt of oil per 500 miles. I put a can of Engine Restorer in it and a new PCV valve and now it uses 1/2 qt of oil in 5,500 miles.
Thank you for another fantastic video. I would never attempt to do that job without your instructions.
Thank you, that's very much appreciated :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Thanks Brother very helpful God bless keep up the good Works.
Details are very explained by mechanic.
Really well done and useful video, Thanks!
Thank you!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Thank you for the channel. Details excellent.
good video friend thanks for sharing your knowledge it worked for me
THAT WAS VERY HELPFUL THANK YOU
Glad we could help you out 👍
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by hitting the SUPER THANKS option below the video on UA-cam, or by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you SUBSCRIBE to our UA-cam channel.
3) Please LIKE our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Super helpful video! Thank you so much.
Great video, hope I never need to do it but now know how.
Thank you! It's a fairly easy job once you've done it a couple of times ;-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Thank you for this video. LIFE SAVER, for us non mechanics
You saved me so much money! Thank you
Great video as always. Professor youwrench
Thank you :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Thanks for this excellent video.
LIKED and SUBSCRIBED!
Wow...this is a very informative video!!
Gracias por la información, me yudo bastante, saludos.
Excelente video, y me gusyaria preguntarte si sabes donde esta instalado el modulo tmps?
thank you for the instructional video,,,,,
Great work buddy....Thank you.
Could you do a reset with the old tipm before trying a replacement unit?
Loved the video. My 2011 Caravan started acting up. Cruse quit then after sitting for a month or so I went to start it and the battery was almost dead, wouldn't crank. I had a little trickle charge device hooked up but not plugged in so I think that drained the battery. Did a quick charge and it started ok. Everything was fine the the dash stopped working and the windshield wipers started running and the controls on the column were dead also. Pulled the J20fuse to stop them. Everything started working again mysteriously and I went to the store. When I drove in the problem happened again. I believe its the TIPM and I am wondering if there are connection problem from corrosion on the TIPM connectors. Does cleaning them up help? I will try your soft reset and see if that works seeing how the problem occur after a low battery event. I would love to here your opinion.
Do you use any contact cleaner on the plugs before assembling tipm?
Video is awesome informative ! Only thing I don't understand is the "reset" procedure ?? Positive battery cable comes to battery ONLY from 2 places - Starter and Alternator ......on Both the "positive" end is insulated/separated from ground (negative) physically . How is touching their positive end to the rest of vehicle chassis (negative) ground .....would do anything ? without a battery - the whole car is "ground" (negative) or more accurate "neutral" .... positive cable of starter/alternator only goes to the internal windings of the electrical "motor" (which both of them are basically).....they don't touch the ground / negative in any way .....otherwise they wouldn't work or blow when connected to battery or spun by engine !!!?!!!?!?
Really nice video thanks.
Please help me... i have dodge caravan 2018... recently the break lights didn't turn off and it kept lighting and the only way to turn it off is to remove the battery, and we replaced the brake pedal switch and nothing happened the same problem was here , waiting for your response and thanks !
Thanks for the info!
Glad it was helpful for you :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Quick question, My grand caravan no longer responds to the key being inserted, no dash light up, no reaction at all..tested battery it is 100% changed last year, mirrors can move and when I press brake the Kms on the dash board turn on. So there is power but zero reaction to the key being inserted, no ding, or response to buttons on the key. Already had issues with gas pump relay on the TIPM and was expecting new problems but am wondering if this related to the TIPM or could it be an ignition/key issue, it is also has hard to insert the key into the ignition.
Great video as well very appreciated!
What ended up being the problem? I’m having that issue now.
Very Very Good!
Glad we could help :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Can you reset it on your own or do you have to go to a dealership to get program
When installing relays back on board,does it matter how they are installed?
The problem I have is the brake light don’t come on and the turn signal goes fast, also the eco mode doesn’t come on
DID YOU PULL SLACK ON WIRE HARNESS BEFORE FILMING?
How would you pinpoint the TIPM as a reason for heating fan in the cabin not working if everything else is working as before ?
( i only unhooked battery 2 -3 times for other repairs ....when connected again , wehicle runs normaly , and everything works . Only heating front blower stopped - was working before battery disconnect ) ????
Thanks!
Thank you for your support!
Thanks
Thank you! :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Do you know how to reset the TPMS on an 05 Grand Caravan
Do you need to do any programming ?
Do you need a dealership to program this?
No, you should not need a dealer to program this, provided you have bought the exact same part number as the replacement. The TIPM will take the information (including VIN) from the car during the reset process (as shown in this video). Hope that helps 👍
-----------------------------------------------
To help support us:
1) Please be sure to use our Amazon Links!
2) Please ensure you LIKE our video's, and SUBSCRIBE to our channel!
3) Donations always welcome! Hit the SUPER THANKS option below the video on UA-cam, or by PayPal: www.paypal.me/youwrench
Thank you for your support!
do you know if the left rear turn signal and stop and run go through the tipm my car the left tail turn stop and run do not work when the head lights are on !! ' they work fine other wise ???
How do fix if I broke a bracket ?
Just came across your video as I was trying to look up the cause of my 2015 dodge grand caravan electrical issues, could you possibly give an ear to a frustrated person, first my gauges and instrument panel turned on and off at random, headlights are on, wiper is on but switches don't work, cant turn it off, non of my switches would work, my rear defrost light would flash every time you open and close the doors or put the key in the ignition, and a/c won't turn on till it stops blinking, then the light stopped flashing one day and my radio light started to turn on every time you opened and closed the doors and put the key in the ignition, but my a/c was able to turn on, no problem, blinkers don't work, but I do have parking light, that's always on too and my brake light works, no interior lights, no door or key buzzer, and this was going on for three months until 3 weeks ago, it went off and never came back on, and it starts and drive just fine.
I did some research before I came across your video, and suspect the problem is my tipm, what do you think?, any input would be of great value, thank you so much.
Wow, that is a lot of electrical problems!!! Yes, absolutely the TIPM could but a culprit in many of the issues you mentioned, and I would certainly be looking at that as a priority. It may be worth getting the part number off of your TIPM and buying a used one on eBay (or similar) with the same part number, plug it in and try. It may solve youe issues entirely, it may solve them partially, and there is also the far more unlikley chance that it won't help at all. But for the price of a used TIPM I would likley try that first. Best of luck!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Had it diagnosed at the shop and they wanted 3000- I found one on eBay for 150 and put it in using the video- dosent work.😢 I’m not getting any power at all to the vehicle. Battery is good. Voltage is going to tipm- I’m going to check all the fuses- any other ideas? Did I buy a bad tipm?
Yes, it sounds like the TIPM they supplier could be dead. Does the part number match 100% with your old one?
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by hitting the SUPER THANKS option below the video on UA-cam, or by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you SUBSCRIBE to our UA-cam channel.
3) Please LIKE our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
@@YouWrench just went back and double checked my connections- one was a little loose- I re connected that plug and made sure I heard the clicks and the car has power! Sometimes the simplest thing is the answer- took too long to figure out though
great job have 2011 caravan with PO480 code low fan ground fans work ok they say it the tipm hope this helps want $600 for new one plush labor cant afford that \
I am having the same issue, have you fixed it yet?
Replaced the tipm and front blower still not working. Any suggestions?
Try testing the relay for the front blower in the top of the tipm (or just swap temporarily with another identical relay next to it just to test). Then test your blower motor. And blower motor resistor. And then after that it would be worth looking atthe heater control panel. Unfortunately it's a process of elimination so you have to keep testing each part one by one until you track it down. We had the front blower not working on a car here, tested EVERYTHING. Turned out to be the TIPM in that case, replacement TIPM and job done. But, of course, that's just one of the possible things it could be. Best of luck!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
I replaced my tipm the other day on a caravan and just noticed today the rear defog button light is blinking ? It’s never done this before, is this just coincidence lol
It seemed to go away after i started driving but when I parked the van again and went outside after I noticed it blinking once again ???
Did the new TIPM part number match 100% to the old one? Or is the new part number one that definitely supercedes the old one? If you take any old same type TIPM and change it over you can get strange issues happening. It could be that! They do have different part numbers for a reason :-) Otherwise it could be one of the actuators has gone faulty. It seems strange it would coincide with the TIPM changeover, so I'd be thinking TIPM most likley. But otherwise an actuator. Best of luck with it!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
@@YouWrench the main part number was exactly the same the version of mine was an ‘F’ that one I put in was ‘H’ I believe so it was slightly newer version. I looked this morning in the window and there was no blinking so not sure if it stops after a certain point or not. And I have not actually tried the rear defrost into see if it works yet but the heater works fine. What do you mean by actuator ?
@@YouWrench so when I went to start vehicle for first time today it started to blink again and the heater never worked then a couple mins later it stopped and the heater starts to work. That’s basically what it seems to be doing now. But the heater will work fine until the vehicle shits off then it will blink again, it will either shut off at some point then start again when the vehicle is started then shut off again and the heater will work .
@@dillwiggle2 I'd recommend changing the TIPM back to the old one and see if the issue immediately disappears. If so, you have your culprit. Hope that helps!
@@YouWrench good suggestion but I’ll sacrifice a blinking light for the vehicle actually be able to start and drive lol
What are symptoms my Grand Caravan might exhibit that would indicate it needs a new TIPM?
Well unfortunately it can be the cause of many, many issues. Things like transmission problems, fuel pump, engine starting, engine stalling, electrical bugs such as windows, ac blower fan. All kinds of weird and wonderful things. You would usually run tests on the issue first to try and rule out the issue being outside of the TIPM - a process of elimination. B these TIPM's do go wrong pretty often, it's a common problem (especially as this unit controls so much within the car and so can be the cause of so many different potential problems!!) Hope that helps!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
So if the tipm isn’t one of the listed matches online can another tipm still work with a hard reset possibly ?
I would not risk it personally. You'll be better off hunting a little harder/waiting longer to find the exact match/newer version confirmed as compatible. Some sellers on eBay just sell TIPM's on the understanding you can take any part number and put it into any car that uses the same type of TIPM. This DOES NOT work. We've tried this, and had two different numbered TIPM's where the indicators would not work at all on a Grand Caravan despite the reset etc. Tracked down the same part number, worked 100%. They make different part number for a good reason, they are different. Stick to matching the exact/definitely compatible part number, you won't regret it!! Hope that helps :-)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
@@YouWrench I picked up a used tipm from a same year caravan but have not tried it or checked the part numbers yet. The problem with mine is that fuel pump relay that is soldered in the tipm. I thought it would be easier to put in a new tipm. Otherwise I would have to order one of those aftermarket bypass circuit from Vertical Visions but would take 2-3 weeks. Other option is to take my tipm apart and solder in another relay. Again a new relay may be hard to find and possibly more waiting time without a vehicle.
Is there any harm in trying a tipm without a matching part number ? Any other suggestion for this relay problem ?
@@YouWrench I just checked the part numbers. Surprisingly the actual number part was exactly the same ! The only difference was the last letter (latest version ?). Mine was an ‘F’ this used one was a ‘H’. I’m assuming it should work fine yes ??
@@dillwiggle2 Try a Google search of your original part number. On websites that sell genuine MOPAR products they will often list the TIPM but advise it is no longer available and has been superseded, and give the part number for the direct updated replacement. Hopefully you'll find your H is fully backward compatible with your F. But worth a 5 minute Google search as it's not always the case!! Hope that helps.
@@YouWrench I checked one website selling them and they seemed to be all compatible as long as the main part number was the same. So anyways I just put the donor tipm in and it actually works !!! Your video was excellent information on this topic btw ! Had one more question one of my key fobs for 2011 grand caravan does not work and I have replaced the battery and a new outer plastic shell and still won’t work. It’s the basic fob with just the lock/unlock/panic buttons. Can you please let me know how to program this fob as I only have one key fob working right now !
mine is 2015 dodge caravan got tipm from 2016.i installed used tipm now asking for radio code.
Have a look on eBay, you should find companites that can supply the code cheaply (around $10) if you don't have it. Hope that helps!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
I broke the green clip that snaps on . Will it be fine until I can replace it ?
Just the clip part broke.
My turn signal is acting crazy. They arent blinking outside and my blinker is going really fast inside.
Yes, it should operate ok without the green clip. But not ideal as it could work it's way loose (unlikley, but could happen!) If you are having signal issues, and you 100% certain that the replacement TIPM has a 100% identical part number to your old one?
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Can TIPM stop the alternator from charging? Replaced alternator and new battery but alternator still isn't keeping the van running
Figure it out yet?
Did you figure it out?
PCM controls the alternator charging
I'd use a hand clamp instead of a cable tie.
This is my first dodge.. it will be my last. Absolutely garbage pos
We feel your frustration, and you're not alone, lol! They are cheap to begin with of course, which leads to cheaper components. They can be a nightmare, but thankfully parts are generally fairly inexpensive (at least compared t some other brands and models!)
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
GM's and FORD are sll garbage now, USA politicians sold us out to china - with the help of GM, FORD, and Fiat Chrysler
I just bought a used dodge - replacing parts all the freakin time - one thing after another
@@oregonxyz Welcome to the world of automobiles. Electronics do not last forever and other brands have problems also. Less issues with Toyota, Mazda & Honda
Do they hide a wire under the TIPM that is used for a hood pin mechanism for a remote starter?
Thank you for such a great video.
Glad you found our video helpful!!
---
To help support us (for both you and others reading this) there are a few things you can do:
1) Donations both needed and welcome! We cannot operate You Wrench without the support of people like you! You can donate by PayPal - just go to www.paypal.me/youwrench
2) Please ensure you subscribe to our UA-cam channel.
3) Please Like our video's on UA-cam (by clicking Like!)
4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us.
Thank you for your support!
Really well explained, thanks!
Would this cause the alternator and battery to keep dying??
The video was awesome. Thank you very much.