Silver Rectangular Signet Ring - How it's Made Jewelry series (Bronze-Level Creative)
Вставка
- Опубліковано 19 лют 2019
- *Note: We start calling all our faculties and enthusiasts 'Creative'. The Creative has ranking level, from Bronze to Grandmaster (someone who named this likes Overwatch). Only the faculty will be ranked Grandmaster.
This is an unconventional way to craft silver ring. As usually the method is reserve for crafting gold ring only just to save the weight. Usually for silver ring, the entire solid piece is preferred due to cheaper material cost. However, by making doing the piece this way, it is easier to be done by anyone.
Made by PikachuThatFly, Bronze- Level Creative
---
We have started the 1-day jewelry workshop. Check out more info from our Facebook and IG profiles.
FB: bangkokcreativestudio
IG: @bangkokcreativestudio
---
Bangkok Creative Studio believes in skilled craftsmanship which need to be preserve before the machinery and advanced manufacturing technology take over the craftsman and loss the skills forever. However, the set of skills shouldn't be only kept to professional only, our goal is to make those skills and knowledge available to everyone!
---
About PikachuThatFly
DVa main in Overwatch. Minimum to none skills in Jewelry Making. Enthusiasm is above and beyond!
Did I hear a sigh at 4.08? I'm happy that I'm not the only one who feels a bit challenged sometimes. Nice work and thank you very much for the tutorial. It's so nice to see not only the perfect way but actually see the mistakes on the way.
This is really great! I also like that everything didn't go flawless and you show us how to fix problems that may occur. Great job!
He visto muchos videos de hacer este anillo pero este es el mejor felicitaciones Gracias...
great job! :)
Thx for sharing~~ 👍
awesome video now ill try to make one!
Wow Beautiful
Very nice 👌👌👌 👌👌 👌 ring meking
Would love to put an RFID chip in one of those and use it to open the gate where I work instead of holding up my ID badge.
cool ring
Nice
Instead of soldering another piece of metal to the one you want to duplicate, you can also use power glue, the one that glues your hands together the moment you touch it, and afterwards heat the pieces with the torch and it will completely burn off. Less solder, and less risk of not getting them apart after. Great ring btw!
Thanks for the tip!
Yeah we do that for other pieces, this one we couldn't find the CA glue, so just kinda went for this primitive solder to hold for duplication.
Thanks again!
That’s a brilliant idea
Super sir
Love the video, and I'm not one to usually say anything but I thought it might be worth noting because of the extra sanding you had to do. Try taking longer strokers with your saw and angle it slightly forward. You will get more even straight lines and your blades will last longer 👍
Awesome video, can you help me where i can buy exactly the same tool that u using for satin finish, thank you
Sir where's youre shop here in Riyadh
عاشت ايدك استاذ
Hey.i realy enjoy your videos so far.
Just some tips again.
As you said your sawing skills.
I recommend using a smaler saw blade (more teeth) it seems you cut too fast therefor you dont have control over the saw.
Try smaller saw blade and keep the saw in an angle instead of 90 ' with the work and try to draw your lines on a paper and using glue attach it the silver after that cut on the outside of the line and file it to size.
On a full handmade ring like this you should use more tgan one king of solder (hard.med.easy) so the outher solder joints wont move.if you dont have those and got 1 kind of solder only try plaster.
Same casting plaster .mold around the ring but leave the area you want to solder.
Hope this was useful .
Keep it up im sure you will get better as you go .😊
Thanks for the tips!
For the saw blade, I really hate sawing in general so I prefer bigger blade so I could get over it quickly haha. but I guess patience is the key.
About the solder, I check with my faculty and he said the same thing about the solder (which didnt explain why he didnt give me the different solders at the first place!). He also recommend to use to fiberglass insulator to stuff inside the ring as well for easier when solder. Guess I have to try that out when I'm not shooting :).
Thanks!
@@BangkokCreativeStudio i'm happy that i could help.
But the part you said about the solder i can picture that 😂
Keep it up you'll be a master in no time😊👍
You are an INSPIRATION. (WHY ?BECAUSE YOU TRY ,AND SUCCEED. AND SHOW IT CAN BE DONE,...MY RESPECT,.. AND GRATITUDE FOR SHARING .. BY THE WAY HOW THICK IS YOUR SILVER SHEAT??? ABOUT,...1.02 MILIMETERS?or slightly thixker??
What a great tutorial. Just the ring that I want to make except that would to install a rectangular opaque stone on the flat top.
Thank you. Please refer me to a video that teaches how to attach the stone and thanks again!
Thanks! We havent done any of that yet.
But the way to do it. Just follow this method of ring making. Then you have to cut the slot on the signet face to fit the stone size. Then attach the stone to the face with epoxy. This is difficult to get precise work though so you need to experiment a bit. Hope this helps!
Bangkok Creative Studio Thank you. Sorry so long to reply, but I just found your posting! Will give it a try. Do you know if I haVe to buy the stone before I begin?
if you setting a flat top stone and you just want to give it a try first. Then you can just cut like a brass of copper sheet to the target stone size and learn the technique first. Same principle, just slight harder to work with. but instead of soldering you can use epoxy to set the metal sheet instead.
Look at scaffoal on UA-cam
always saw up and down rather than at an angle it’ll help :)
I’ve seen people make the side pieces larger (not cut to fit the inside) solder them onto the ring, then cut off excess material.
Nice man.how can i caughr for purchasing a single ring its possible or not?
Hi nice tutorial. I’m about to make a similar ring in a vertical rectangular shape with a flat onyx set into the top. Can you tell me how you measure and calculate the length of metal to ascertain the ring size please? Also i see you recommend using epoxy I have only ever used a setting without any glue so if you have any idea of how to make a bezel setting or four claw setting that would be helpful ;)
Ring size, you have to do this mathematically, best you draw the technical sketch first. then for the size area you just have to make sure when convert circumference to length correctly (it's generally 1:1 in that regard but nature of handmade you have to account for contingency for over/undersize.
Bezel, if you are not the drilling and bluring them to dig up the slot for the stone, i recommend cutting the bezel 'frame' and add on top of the ring.
Claw, add large prongs, then after you get the prongs, you can profile it to the claw shape you need. Easiest way of adding prongs is drilling holes and adding the rods.
Nice!! I just realized I could do a similar piece with hardware store aluminium!
We have similar idea too! Keep watching if the idea comes true ;)
Super good job
#akthungar
Wow..great work u dun...plz lell me which type solder used by u....
If you talking about flame, standard methane + wind.
Solder metal. The high silver contraction for slower melting.
@@BangkokCreativeStudio thnx a lot sir...
i m talking about.... solder... how u make solder.... fine silver+zinc+copper= soldering material....? Or what...plz tell me...
How do you plate de ring?
Good friend, I liket your compas, could your tell me how you made it? sinceraly Marco de Bolivia
it's called Precision Metal Compass, fairly common for use in metalwork, jewelry and leatherwork. Shouldn't that hard to find in digital retailer.
@@BangkokCreativeStudio Thank you so much
As an idea you can do it the other way around before bending it in the ballast, locate the center of the metal sheet and calculate the base of the rectangle you want and cut a groove at the ends and bend at 70 ° V like this figure and measure the size of the finger and the height of the finger with the base of the rectangle then cover at both ends and you get a finer ring in the finish. Regards
In how many grams did u made it plese reply
Hello friend, I want to make a silver sword
How thick was the metal sheet that was used in the beginning?
0.8, any thicker would be slightly difficult to work with
@@BangkokCreativeStudio Thank you very much.👍
Put it a vice when filling, much easyer
Potrebbe dirmi per piacere che spessore massimo usa??...0,8...1...1,2 ?? Grazie
Is this how Celebrimbor create The One Ring?
yeah, hammering on the anvil is a lie! ;)
Dont worry, bronze is a strong metal.
Muy básico faltan más detalles y el forro
How many grams?
6-7 I think if I recall correctly
Ok thank
😪😪😪😪😪
I think he is asian
Nice
Nice