Most folks would run away screaming from a project like this- you two embrace it with so much enthusiasm its incredible. Well done on the roof, cant wait to see whats next.
Seriously, when I saw the first video I wondered if they would still be married by the end of it, because it seemed so daunting, I am glad to find my worries unfounded.
I looked back on some of the old videos during this week and it's actually pretty incredible how far you guys have progressed in such a, relatively short time. Fantastic job guys, I love this channel.
I’m sorry but I have to add another comment having now watched a little more of you video. I’m blown away. That’s a huge area of the ship that you have now restored and protected. Not to mention no more leaks that can damage the inside of the ship. Bravo! Bravo! 👏👏👏👏👏Much respect.
#0 Did you remove the scrap roof? Yes #1 Did you put on a new underlayer of the roof? Yes #2 Did you cover the roof with fiberglas? Yes #3 Is the roof water tight? Yes #4 Could anyone made it more water proof or roof-like? No #5 So you did it all right! Alright?
This is the biggest visual evidence to those on the outside of your progress, to those who have been below via you tube and seen all the effort there it is still the biggest eye pleaser. I hope you gain a glow of satisfaction every time you come back to work upon her!
With every new nail, board, paint, fibreglass you slowly reveal the potential of this amazing old girl. When u did the drone shot, I literally said “wow”, it looks so good. Keep doing it your way because your way is amazing. Love every thing u r doing on the boat.
Just watched you sanding all that glass and am now itching all over. Takes one back a few years. The hot sunny days as I recall, were the worst. Your progress is stunning. Bravo.
Yes it is normal to Hoover the roof lol. I was drilling some aluminium in my driveway the other day and it left all the shavings on the concrete so I vacuumed the driveway because the broom wouldn’t sweep them up. Now my neighbours won’t talk to me. 🤣
Watching you guys just gave me a flashback to the sixties, about 68 or so. I was with my dad when we stopped by a marina in Salem Mass. A family friend owned an old round bottom boat, flat head four, about thirty five feet. Boat was built in the thirties I believe. Very small cabin. He had her on the dry as he was replacing the tiny cabin with a bigger one he had salvaged. When we were there he was finishing up, covering the decks and cabin roof. He was using a canvas cloth completely saturated in an oil based paint which was apparently the norm back in his day. Same principle I suppose as we use with fiberglass cloth/mat and epoxy gel. Interesting, and while I can't say if the boat still existed, I know she outlasted her master. PS: Awesome progress. You guys are great!!!
Canvas roofs were used on all sorts of structures including trams (streetcars). Materials varied a bit, in some instances they apparently used a tar-based sealant mainly intended for basins and water tanks back in the 1920s. Keeping those watertight after many decades is a bit of a challenge and I've seen some approaches fail.
My father was a traditional coach painter and very familiar with varnish/paint soaked canvas. How preferred method was to prime the wood with a thinned varnish and leave to go tacky, then add the canvas or linen and really soak with varnish. The old slow-drying (brush for ever) varnish was the best as it naturally flows and settles. He did similar thinks with good old cheap hardboard. The result was like a fibre-filled plastic but not brittle like resin and incredibly weather proof.
@@lauralake7430 There are U tube videos on how to build the traditional Greenland type kayaks using the painted or doped fabric. Its still used on Aircraft and old vintage model aircraft. It shrinks the fabric, drum tight and and seals the pores and fibres making it air and Water tight. For aircraft they would use Linen as the fabric due to its strength and stability.
Great job guys... We used to take big sheets an submerge them into the resin an lay it an roll out bubbles an excess resin... It's worked in the past .. you guys are simply amazing... Thanks for sharing your lives with us.. ✌🏼💗😊❣️
WOW, WOW, WOW. She really looks the goods. Bloody hell, you blokes are fabulous. So motivating. Now I've got to go out to wash the car and mow the bloody lawn. See what you've done. Congratulations, I love it.
Great job you lot. Again you have surpassed yourselves. She is gradually starting to take shape, and this is a large piece of the jigsaw done. I love watching you guys. Such a great watch. I'll catch you all in the next video x
Simon and Gemma what a great job and all the people that has helped " unbeleivable" .Take no notice of all the experts, your doing OK. " My definition of a expert is" : Ex is something that has been - and SPURT is a drip under pressure, So carry on as you are, GREAT.
FYE: PPE [Personal Protection Equipment ] is there to protect you against known risks and actual hazards such as dust in your eyes and lungs when sanding. Chemicals such as aceton, resin etc. esp. in these quantities are a serious risk of fire and explosion, it will seriously harm your lungs and cause OPS a set of irreversible neurological problems that are life-changing.Loud noise can produce permanent damage to your hearing, so sanding and other machines that produce 60+dB require protection too. Keep your project pleasant! USE your Personal Protection Equipment [PPE] ALWAYS! -- A trip to A&E is best avoided. -- nice project by the way... Go for it!
Excellent work done on this video. You two have proved, to me at least, that you are very capable of repairing this Boat. There are always those that wish to give their opinion just because. This may not be a "how to" video but it is in deed. When you guys get done, you will be sought after I guarantee it!
We see the wind generator spinning in a lot of shots. How about a 60 second update how it is maintaining your electrical needs. - IT IS your boat (ship) and you are the people who will either enjoy or curse YOUR decisions. We learn from errors not by being lucky and things just working out. Beauty is you will know YOUR boat and how to deal with any issues that arise in the future. It is really beautiful to see you extending the life of such a historic vessel.
That was simply fabulous. Seeing you go up the mast, Gemma, and knowing how you don't like heights brought to mind my reading of the Hornblower series when I was young. Now I understand what it looks like from the viewpoint of the top of the mast. Thanks for sharing this wonderful experience with us.
I was really liking the wood roof, knowing of course you still have to do gel coat/s. I am impressed. Nice job Barry, Ian and Robbo. I didn't see blue gloves blowing round the roof. Thanks m8s, enjoyed watching you do the roof. You and yours stay safe and well.
I used to work with Fibreglass back in the 80's for Four Winns. Gemma is the smart one, and will thank herself for wearing that suit she is wearing. Simon and the other gentleman will wish they had. No fear though, Acetone is the best thing for getting that sticky stuff off of your body. Watch out for the cuts though, they will burn badly for a second lol You all are doing a fantastic job! HOOAH!!!
I think you all did a fabulous job on this roof so far. I looks great. Good Job. Well, Barry, you blew my mind sir, that's amazing what you accomplished at your age.
with so much yo do, you just keep laughing, someone needs to bottle whatever you two drink, what a team. The boats really starting to look good and is a credit to you both.
SIMON you didn't have a mask on when you were sanding lol shame on you sir put one on next time PLEASE 👍ANOTHER GREAT VIDEO 👍👍❤️ & I love your fiberglass dispenser Simon 👍
Just stunned by the work you've done. Got a kick out of 23:29 when it looks like Gemma's vaccum emits a flock of birds. I knew you were magical, but that was something extra.
It's looking great. Fiberglass is one of my least favorite things to do . Did a year of school and 6 months at an aircraft makers place. My hat's off to all who helped this time. Soon the fly bridge will be back.
Well you two. Things are beginning to see a glimmer of light at the end of the tunnel. Only a glimmer mind but definitely going in the right direction. A big shout out for Barry. 👏👏👏👏 Nothing but praise coming from this direction. 👍👍👍
WOW !!What a fantastic , wonderful and satisfying job . I am jealous and envious , I had the opportunity to restore a cabin cruiser 40 years ago in Australia , but decided not to go ahead with it , now I am kicking myself for not doing it . Great restoration , am looking forward to the finish .
A sander such as is used on hardwood flooring might have saved some time and effort. Perhaps when you tackle the aft portion of the roof? Your dedication and cheerful acceptance of the tasks you undertake are a continuing source of inspiration.
You have done a great job and you know you have got rid of the bad roof you water sealed from the battering the boats going to get over the next 50 year's, the next owners will have seen how you have taken time to restore the way it was first built.
Great job! I hope you kept the bits of fiberglass off in a bucket. VERY handy if you need to fill an area (like a corner or a hole). Keep up the great work!!!
For future reference, you wet out the substrate because the wood will soak up some of the resin out of the glass. You should wait a bit before laying the glass over it so that it starts to solidify, then you wont be soaking more into the wood and drying out the glass. Many people don't use the fin rollers correctly. You should start from the middle and push out the air bubbles and extra resin to the outside in one direction, not rolling back and forth. The glass can float on top of the resin and you can trap air under the glass, which makes voids. Hope that helps in the future. Personally, I would use some chop strand mat to start with and lay two more layers of bi-axial cloth over it. One other suggestion, Gelcoat generally doesn't have wax in it , so that it can be sprayed or laid up with glass. If you spread it out a layer with a autobody spreader, it will fill the very low spots and pinholes, and then coat over it with a thicker painted layer, it will give you a better finish.
Simon, big pants, good idea. She is looking great, it is amazing the difference that new deck head gives to the aerial shots. Enjoy your deserved rest.
That's an absolutely bostin job. Hope it didn't cost the million dollars it looks like. It crossed my mind that a floor sander might have made for easier work when sanding, but you'd need a generator for that. Also like you say, it isn't a tutorial and it is your ship! Still looks brilliant and a testimony to all your hard work. Congrats to you both on a lovely roof, I love this series.
I've been watching your boat restoration and your families joyful adventure. It's really brings joy to myself and my family watching . We look forward to every new episode.
Most folks would run away screaming from a project like this- you two embrace it with so much enthusiasm its incredible. Well done on the roof, cant wait to see whats next.
Seriously, when I saw the first video I wondered if they would still be married by the end of it, because it seemed so daunting, I am glad to find my worries unfounded.
I looked back on some of the old videos during this week and it's actually pretty incredible how far you guys have progressed in such a, relatively short time. Fantastic job guys, I love this channel.
I’m sorry but I have to add another comment having now watched a little more of you video. I’m blown away. That’s a huge area of the ship that you have now restored and protected. Not to mention no more leaks that can damage the inside of the ship. Bravo! Bravo! 👏👏👏👏👏Much respect.
#0 Did you remove the scrap roof? Yes
#1 Did you put on a new underlayer of the roof? Yes
#2 Did you cover the roof with fiberglas? Yes
#3 Is the roof water tight? Yes
#4 Could anyone made it more water proof or roof-like? No
#5 So you did it all right! Alright?
I just 60 and I am active, Barry has just given me so much inspiration. I want to be like Barry.
You guys have done so much already but I think this is the year we see huge leaps forward. Love your positive non stop attitude.
Wow, the roof looked great from the drone shot. For Sarinda, the embarrassment of being topless in public is finally over.
My skin is itching just watching you. Fibre glass is my mortal enemy.
This is the biggest visual evidence to those on the outside of your progress, to those who have been below via you tube and seen all the effort there it is still the biggest eye pleaser. I hope you gain a glow of satisfaction every time you come back to work upon her!
Keep her Rollin.
That old girl is appreciating all the rubbing and effort she gets..
Barry is looking good and fit for his age, hope he goes to 100. Hope I can look that good in 4 more years.
Simon, Gemma, Ian, Robbo, Barry = Warriors. Good on you all.
With every new nail, board, paint, fibreglass you slowly reveal the potential of this amazing old girl. When u did the drone shot, I literally said “wow”, it looks so good. Keep doing it your way because your way is amazing. Love every thing u r doing on the boat.
Looks nice , and don't worry about all the experts . They aren't there .
Just watched you sanding all that glass and am now itching all over. Takes one back a few years. The hot sunny days as I recall, were the worst.
Your progress is stunning. Bravo.
Yes it is normal to Hoover the roof lol. I was drilling some aluminium in my driveway the other day and it left all the shavings on the concrete so I vacuumed the driveway because the broom wouldn’t sweep them up. Now my neighbours won’t talk to me. 🤣
Watching you guys just gave me a flashback to the sixties, about 68 or so. I was with my dad when we stopped by a marina in Salem Mass. A family friend owned an old round bottom boat, flat head four, about thirty five feet. Boat was built in the thirties I believe. Very small cabin. He had her on the dry as he was replacing the tiny cabin with a bigger one he had salvaged. When we were there he was finishing up, covering the decks and cabin roof. He was using a canvas cloth completely saturated in an oil based paint which was apparently the norm back in his day. Same principle I suppose as we use with fiberglass cloth/mat and epoxy gel. Interesting, and while I can't say if the boat still existed, I know she outlasted her master.
PS: Awesome progress. You guys are great!!!
Canvas roofs were used on all sorts of structures including trams (streetcars). Materials varied a bit, in some instances they apparently used a tar-based sealant mainly intended for basins and water tanks back in the 1920s. Keeping those watertight after many decades is a bit of a challenge and I've seen some approaches fail.
You should take a look at Sailing with Geordie hes got two boats of that sort of period he lives on board one.
My father was a traditional coach painter and very familiar with varnish/paint soaked canvas. How preferred method was to prime the wood with a thinned varnish and leave to go tacky, then add the canvas or linen and really soak with varnish. The old slow-drying (brush for ever) varnish was the best as it naturally flows and settles. He did similar thinks with good old cheap hardboard. The result was like a fibre-filled plastic but not brittle like resin and incredibly weather proof.
I had a canoe like that, as a kid. Hated painting it, but it was really lightweight, and really really old
@@lauralake7430
There are U tube videos on how to build the traditional Greenland type kayaks using the painted or doped fabric.
Its still used on Aircraft and old vintage model aircraft. It shrinks the fabric, drum tight and and seals the pores and fibres making it air and Water tight. For aircraft they would use Linen as the fabric due to its strength and stability.
She looks good with her new white top. She'll be sailing down the river any time, and looking good at it.
Thanks! Love you guys, ii dont have much but have a coffee from me!
Thank you so much B.M, your support means the world to us xx
And the fiberglass roller goes Whoopie! Whooopie! Whooopie!
Great job guys... We used to take big sheets an submerge them into the resin an lay it an roll out bubbles an excess resin... It's worked in the past .. you guys are simply amazing... Thanks for sharing your lives with us.. ✌🏼💗😊❣️
WOW, WOW, WOW. She really looks the goods. Bloody hell, you blokes are fabulous. So motivating. Now I've got to go out to wash the car and mow the bloody lawn. See what you've done. Congratulations, I love it.
Great job you lot. Again you have surpassed yourselves. She is gradually starting to take shape, and this is a large piece of the jigsaw done. I love watching you guys. Such a great watch. I'll catch you all in the next video x
The old girls coming along now, an the boat doesn't look bad either.
VAN builders and boat builder. Bet never thought you'd be here 3 years ago.
Great job and so well planned out. Kudos-- and the boat gods didn't even provide rain!
Your daughter has grown up so much
Since you started videoing..Quite intelligent too
Kudos to great parents.
I remember not long ago, holding my breath, willing you on to 50k subscribers, and now nearly, almost, almost nearly 60k. Well done......😀
Simon and Gemma what a great job and all the people that has helped " unbeleivable" .Take no notice of all the experts, your doing OK. " My definition of a expert is" :
Ex is something that has been - and SPURT is a drip under pressure, So carry on as you are, GREAT.
FYE: PPE [Personal Protection Equipment ] is there to protect you against known risks and actual hazards such as dust in your eyes and lungs when sanding. Chemicals such as aceton, resin etc. esp. in these quantities are a serious risk of fire and explosion, it will seriously harm your lungs and cause OPS a set of irreversible neurological problems that are life-changing.Loud noise can produce permanent damage to your hearing, so sanding and other machines that produce 60+dB require protection too. Keep your project pleasant!
USE your Personal Protection Equipment [PPE] ALWAYS! -- A trip to A&E is best avoided.
-- nice project by the way... Go for it!
Excellent work done on this video. You two have proved, to me at least, that you are very capable of repairing this Boat. There are always those that wish to give their opinion just because. This may not be a "how to" video but it is in deed. When you guys get done, you will be sought after I guarantee it!
God I love Simons tricks. That ply/router idea was great!
We see the wind generator spinning in a lot of shots. How about a 60 second update how it is maintaining your electrical needs. - IT IS your boat (ship) and you are the people who will either enjoy or curse YOUR decisions. We learn from errors not by being lucky and things just working out. Beauty is you will know YOUR boat and how to deal with any issues that arise in the future. It is really beautiful to see you extending the life of such a historic vessel.
That was simply fabulous. Seeing you go up the mast, Gemma, and knowing how you don't like heights brought to mind my reading of the Hornblower series when I was young. Now I understand what it looks like from the viewpoint of the top of the mast. Thanks for sharing this wonderful experience with us.
AMAZING WORK GUY'S !!
As people have already posted you guys have done an AMAZING job on that boat !!
I CAN'T WAIT TO SEE THE FINISHED PROJECT X
I was really liking the wood roof, knowing of course you still have to do gel coat/s. I am impressed. Nice job Barry, Ian and Robbo. I didn't see blue gloves blowing round the roof. Thanks m8s, enjoyed watching you do the roof. You and yours stay safe and well.
I used to work with Fibreglass back in the 80's for Four Winns. Gemma is the smart one, and will thank herself for wearing that suit she is wearing. Simon and the other gentleman will wish they had. No fear though, Acetone is the best thing for getting that sticky stuff off of your body. Watch out for the cuts though, they will burn badly for a second lol You all are doing a fantastic job! HOOAH!!!
Waterproof that Baby!
I think you all did a fabulous job on this roof so far. I looks great. Good Job. Well, Barry, you blew my mind sir, that's amazing what you accomplished at your age.
Go Barry, what a legend.
All doing a fantastic job. Best of British to ya. Love from Australia
with so much yo do, you just keep laughing, someone needs to bottle whatever you two drink, what a team.
The boats really starting to look good and is a credit to you both.
Thanks
Wow Guy, that is extremely kind of you, thank you so much for your support xxx
@@ShipHappensUK No problem- love the weekly videos. What is next on the project list?
@@lacewing3 back to internal woodwork today!
The secret to a long healthy life is to convince some one else to keep working!
Huge difference and thanks for the "documentary" that's not a "tutorial"! 8)
SIMON you didn't have a mask on when you were sanding lol shame on you sir put one on next time PLEASE 👍ANOTHER GREAT VIDEO 👍👍❤️ & I love your fiberglass dispenser Simon 👍
Looking supreme ! It's so nice that you get some others to help you folks so happy for you ❤ 😊!
Nice work. New roof looks good. Love to follow your progress. And Gemma's new makeup is spot on 😁
Credit where credit is due. You certainly did some this episode. Everybody likes movement.
A beautiful new hat has capped it off beautifully. Bravo!
Acetone will remove the Gelcoat of your skin Gemma and Robbo. Great job everyone involved.
all you guys are stars 🌟 a massive project , just treat it like eating an Elephant , one bite at a time!!🐘
Just stunned by the work you've done. Got a kick out of 23:29 when it looks like Gemma's vaccum emits a flock of birds. I knew you were magical, but that was something extra.
WOW! Looks fabulous! You're daughter is adorable!
With that shiny white top deck she looks like a new boat... sort of
Boad is an acronym for break out another thousand.
looking fab you have do great looking so much better not when it finish job on it
It's looking great. Fiberglass is one of my least favorite things to do . Did a year of school and 6 months at an aircraft makers place. My hat's off to all who helped this time. Soon the fly bridge will be back.
Very nice finish, good on you Baz, you said it, everything in moderation, keep the stress levels down and stay flexible.
The impression of Adam Ant is coming along Gemma 😂 😂
Well you two. Things are beginning to see a glimmer of light at the end of the tunnel. Only a glimmer mind but definitely going in the right direction. A big shout out for Barry. 👏👏👏👏 Nothing but praise coming from this direction. 👍👍👍
Finally a result that can be seen from the outside . Great work , please carry on 😉
Truly is a lovely looking vessel it has good lines well balanced she will sail very gracefully 👍
Congrats on getting that far - that was a major accomplishment!
Simon laughs just like my grandson when he's up to no good lol 😂
Good on ya. Looks great.
Best regards from Indiana, USA.
WOW !!What a fantastic , wonderful and satisfying job . I am jealous and envious , I had the opportunity to restore a cabin cruiser 40 years ago in Australia , but decided not to go ahead with it , now I am kicking myself for not doing it . Great restoration , am looking forward to the finish .
A sander such as is used on hardwood flooring might have saved some time and effort. Perhaps when you tackle the aft portion of the roof? Your dedication and cheerful acceptance of the tasks you undertake are a continuing source of inspiration.
sterling effort today guys..shes bright enough to see from space now i reckon..
You have done a great job and you know you have got rid of the bad roof you water sealed from the battering the boats going to get over the next 50 year's, the next owners will have seen how you have taken time to restore the way it was first built.
You all have done a fantastic job, looks brill. Well done a big mile stone completed.
You should do a video about all the research you do on the internet learning how to do stuff on the boat.
Barry's doing a top notch job.😁
Looking lovely in white..... but shouldn't it be battleship grey? 😂
Great job! I hope you kept the bits of fiberglass off in a bucket. VERY handy if you need to fill an area (like a corner or a hole). Keep up the great work!!!
You lot would fit in so well with my family. We are all as mad as a box of frogs.
Sounds good, when is the next family dinner? 🤣
Wow the old girl looks good....So does the boat.
White, Love it. Looks great.
Big shout out to u all seen all your video s love your doing there lot work be good end send in u blessings from Rob and tracie in uk
Awsome work everyone! Special thanks to your little helpers for sure. Next winter you wont need no buckets! 😁
U make my week and the plastic bag in bucket fab 😁😁😁😁
For future reference, you wet out the substrate because the wood will soak up some of the resin out of the glass. You should wait a bit before laying the glass over it so that it starts to solidify, then you wont be soaking more into the wood and drying out the glass. Many people don't use the fin rollers correctly. You should start from the middle and push out the air bubbles and extra resin to the outside in one direction, not rolling back and forth. The glass can float on top of the resin and you can trap air under the glass, which makes voids. Hope that helps in the future.
Personally, I would use some chop strand mat to start with and lay two more layers of bi-axial cloth over it. One other suggestion, Gelcoat generally doesn't have wax in it , so that it can be sprayed or laid up with glass. If you spread it out a layer with a autobody spreader, it will fill the very low spots and pinholes, and then coat over it with a thicker painted layer, it will give you a better finish.
GOBSMACKED What more can I say ? Great work and best wishes. Xx
Amazing! Amazing! Amazing! One more thing- Amazing!💜
Brilliant , looks fantastic , we’ll done all 👍🏻love from Spain 🇪🇸
Your all doing an awesome job
Simon, big pants, good idea. She is looking great, it is amazing the difference that new deck head gives to the aerial shots. Enjoy your deserved rest.
That's an absolutely bostin job.
Hope it didn't cost the million dollars it looks like.
It crossed my mind that a floor sander might have made for easier work when sanding, but you'd need a generator for that. Also like you say, it isn't a tutorial and it is your ship!
Still looks brilliant and a testimony to all your hard work.
Congrats to you both on a lovely roof, I love this series.
Lovely conclusion to a long long 7 days. So much work. Looks great from the air.
Oh glorious sanding ! Mads is a legend - as are you guys !
Great job guys I can’t believe you have to explain everything you do.
Fantastic! easy to see the vision now congratulations on such hard work paying off
fibre glassing is when you can come to a sticky end and be happy about it 😂
That Looks ACE, Good teamwork, Good Job Well Done Have a Pat on the Back...
I've been watching your boat restoration and your families joyful adventure. It's really brings joy to myself and my family watching . We look forward to every new episode.
u guys are great i have never known any body who have the patience to do as u have
Hi you did a great job 👏. I'm from Kitchener Ontario Canada 🇨🇦 😊 .Thank you for show me the hard work you did
Well done from Canada!
Barry is amazing ehh! Looking spectacular you guys, hats off to you both, and Barry of course! 👍👍🎉🎉🎉🎉🎉🤘🏻🤘🏻🇬🇧🇺🇸🇬🇧🇺🇸🇬🇧🇺🇸🇬🇧🇺🇸
I haven't a clue on how to do fiberglass but that looks good to me.
Your new cabin roof looks SPECTACULAR! You, and your friends, are to be commended for all the hours spent preparing for the gel coat!