Thank you for that! Thanks to you this is now as simple as the old school Thrustmaster Attack Throttle Software. Was freaking lost for about a year trying to figure out how to use this software. I wish there was a way to integrate all Windows controllers to be seen and programmable in target.
Shame you didn't continue this tutorial, it is useful... I'm having big trouble with IL 2 to avoid overlapping axis with my TC16000M joystick and the throttle control :(
Thank you so much, I was lost until I came across your video. Thrustmaster should be thanking you as well because the video "guide" they have is absolutely crap!
Is any of this necessary if there is a controller mapping configuration in game where you can directly map controller buttons to in game commands? Do you only need this Target config if for example your game takes a command from the 'W' key on your keyboard, but the game doesnt let you map that action directly to a button on your controller? As im otherwise struggling to understand the pupose of this software, thanks
The best part of this software is that it turns your switches "off" positions as another command. Effectively doubling the amount of commands you can use. I'm just starting to get the hang of it now, by realizing you have to do every button you're gonna use in the game, because it will remove the original assignments in the game and use just TARGET's assignment's. (for DCS anyway). Damn it's a long process, but highly worth doing. I have a question though, what are the five LED'S for near the friction setting of the Warthog throttle? I can turn them off and on but what function do they provide?
So I'm trying to set up the buttons to do keyboard presses. To test, I just made the lower top button to be "C." After saving and running the profile, it doesn't work, even inside the TARGET event tester window. There's no input at all, even from the joystick axis'. In the Joystick Control Panel when I go in there and double click the joystick, none of the buttons or axis' are doing anything either. Waaaaat?
TARGET does NOT work for me. My controller is recognized and i do EVERYTHING he does. But when i go to the event analyzer it simply doesnt recognize my input
Hi there, Could you help me out perhaps? I want to play SWG with a T16000M and a throttle and did everything you did, but it doesn't work... What should I do? :/
I'm having problems with TARGETGUI loading. I had to disconnect the Thrustmaster joysticks and then reconnect afterward just to get TARGETGUI to run. Now that I have it running, and my devices are plugged in, there are no devices registered in TARGETGUI.
Oh man….you never made a follow up. I’m at my wits end. There thrustmaster throttle has a little joystick and I want to use it to look around in the cockpit but it won’t let me in dcs.
thanks but im still having issue in ace combat 7 in event tester everything seems to work just fine but as soon as i get in to ace combat some buttons work some not at all and some do two functions like the one i mapped and the original function i have steam im going to try to map it there again but im stuck for now going to play with steam controller setting maybe that's it
Please help! I have one arm. I just bought a used computer and the thrustmaster t16000m and I'm trying to make the target software to emulate the mouse XY on the joystick x y so I can play first person shooter games and the problem I'm having is when I turn to the left or the right with the joystick it looks back to where I started when the joystick returns to Center also it will not turn all the way around like it does with the mouse. It seems like there should be a setting for this but I have no idea what I'm doing. I have not played games since the first Halo NPC and I think that was about 12 or 15 years ago. I had to stop playing because all the games require two hands just like now but I'm hoping to get back into it
I'm having issues setting up my duelsticks. Target does not think my 16000 are connected. Also windows will not let me use thrusttmaster drivers. I'd appreciate any guidance you could give.
Is there a way to make the joyx and joyy into keys? The t16000 is what i have. I can make the top hat simulate keys like WASD but i want to make the entire sticks movement to simulate WASD
No idea how to actually play the game once the TARGET configuration is complete. If I've labelled a configuration "Test," for instance, shouldn't it be listed in the game's OPTIONS/Controls section?
Good vid! Would really appreciate some assistance from the community - I have now bought two NEW Warthogs (Throttle and Stick) for Win 10 PCs. First machine, tried everything - no joy. Read through Thrustmasters instructions, tried everything, but it would only ever recognise the throttle (in both device manager, controllers as well as the TARGET software). I spent hours trying everything I could. Could not upgrade firmware to both devices, either. Thinking it was a faulty stick I emailed Thrustmaster - good luck, they advice 15 days for a reply (insane!). However, enthusiasm to play MS Flight Sim 2020 overcame me, and I sent the the first unit back to Amazon and purchased again, directly, from Thrustmaster (yes, I know!). Poor comms but very quick delivery. And it still does not work! Same issues - on my first attempt at installing, my PC recognises both Throttle and Stick. I then updated tyhe firmware for both devices, and installed software, and again, onyl the throttle was recognised. Uninstalled the drivers, restarted machine, tried the same thing over and over, and it only recognised the throttle. Any ideas? Much appreciated it. Surely I can't have had two new duff Warthogs?
Possibly a usb issue or it’s not plugged in properly, happened once to me on the same stick ( Warthog Hotas combo) I disabled power management on usb in device manager.
I am the video poster... I lost access to the account I made this video on but I think I know what your issue is. I'll try to make a video within the next week or so detailing how to fix this. I'll post a link to it in the comments.
Hi there, Great Vid thanks. I've got the same setup as you .. T1600 ,peddles and Throttle. I notice it looks like you have a config for X-Plane 11 ? I'm trying to find a setup config for this and having no luck. would you care to share yours? I could then just tweak some a little if necessary or use your config as is. Thanks in advance
i am trying to do this now but the download buttons are not working none of them i just bought this piece of shit thing and already there support is failling
We need part 2. Please make it, we will watch it.
Thank you for that! Thanks to you this is now as simple as the old school Thrustmaster Attack Throttle Software. Was freaking lost for about a year trying to figure out how to use this software. I wish there was a way to integrate all Windows controllers to be seen and programmable in target.
Shame you didn't continue this tutorial, it is useful... I'm having big trouble with IL 2 to avoid overlapping axis with my TC16000M joystick and the throttle control :(
I really like your explanation and dedication, very useful for new users!. Thanks.
Thats the only good tutorial i could found. Seriously
Thanks, good video! Are you planning to do the more the advanced videos? I'd watch 'em!
Thank you so much, I was lost until I came across your video. Thrustmaster should be thanking you as well because the video "guide" they have is absolutely crap!
Hey thanks, this video's still helping people
Thank you, this video helped me configure my setup
Thanks, good video. Wish you had continued with it
i tried but it is not working for me. how could I set it back the way it was. like setting it to factory I guess. pleas id appreciate the help
Is any of this necessary if there is a controller mapping configuration in game where you can directly map controller buttons to in game commands?
Do you only need this Target config if for example your game takes a command from the 'W' key on your keyboard, but the game doesnt let you map that action directly to a button on your controller? As im otherwise struggling to understand the pupose of this software, thanks
The best part of this software is that it turns your switches "off" positions as another command. Effectively doubling the amount of commands you can use.
I'm just starting to get the hang of it now, by realizing you have to do every button you're gonna use in the game, because it will remove the original assignments in the game and use just TARGET's assignment's. (for DCS anyway).
Damn it's a long process, but highly worth doing.
I have a question though, what are the five LED'S for near the friction setting of the Warthog throttle? I can turn them off and on but what function do they provide?
So I'm trying to set up the buttons to do keyboard presses. To test, I just made the lower top button to be "C." After saving and running the profile, it doesn't work, even inside the TARGET event tester window. There's no input at all, even from the joystick axis'. In the Joystick Control Panel when I go in there and double click the joystick, none of the buttons or axis' are doing anything either. Waaaaat?
Thank you!
TARGET does NOT work for me. My controller is recognized and i do EVERYTHING he does. But when i go to the event analyzer it simply doesnt recognize my input
I know this is probably too late, but I found that I had to set the time the button was held for to something higher than 40ms for it to register
Man, that was excellent! Thanks much.
Hi there,
Could you help me out perhaps? I want to play SWG with a T16000M and a throttle and did everything you did, but it doesn't work... What should I do? :/
I'm having problems with TARGETGUI loading. I had to disconnect the Thrustmaster joysticks and then reconnect afterward just to get TARGETGUI to run. Now that I have it running, and my devices are plugged in, there are no devices registered in TARGETGUI.
Oh man….you never made a follow up. I’m at my wits end. There thrustmaster throttle has a little joystick and I want to use it to look around in the cockpit but it won’t let me in dcs.
excellent
So does it support generic joystick, not just the ones from Thrustmaster?
Thank you man! legend
OMG, this is so useful, thanks.
Great I just bought one HOTAS WARTHOG And i didn't know you could program it
thanks but im still having issue in ace combat 7 in event tester everything seems to work just fine but as soon as i get in to ace combat some buttons work some not at all and some do two functions like the one i mapped and the original function i have steam im going to try to map it there again but im stuck for now going to play with steam controller setting maybe that's it
Please help! I have one arm. I just bought a used computer and the thrustmaster t16000m and I'm trying to make the target software to emulate the mouse XY on the joystick x y so I can play first person shooter games and the problem I'm having is when I turn to the left or the right with the joystick it looks back to where I started when the joystick returns to Center also it will not turn all the way around like it does with the mouse. It seems like there should be a setting for this but I have no idea what I'm doing. I have not played games since the first Halo NPC and I think that was about 12 or 15 years ago. I had to stop playing because all the games require two hands just like now but I'm hoping to get back into it
THANK YOU!
I'm having issues setting up my duelsticks. Target does not think my 16000 are connected. Also windows will not let me use thrusttmaster drivers. I'd appreciate any guidance you could give.
Is there a way to make the joyx and joyy into keys? The t16000 is what i have. I can make the top hat simulate keys like WASD but i want to make the entire sticks movement to simulate WASD
How do i get the LED light thing to work with the profile?
No idea how to actually play the game once the TARGET configuration is complete. If I've labelled a configuration "Test," for instance, shouldn't it be listed in the game's OPTIONS/Controls section?
I followed your instructions exactly to bind ALT + Printscreen but it just doesn't work
And do i need this profile running during DCS e.g. or load it once?
If you want to change a slider or ministick into a button. Is that possible?
can you help me setting up a modifier? im playing BMS and in this game i can set only one modifier yet i need two
does not recognize my T flight hotas one :(
I need T.A.R.G.E.T, and who better and more comforting than a Eugene Porter soundalike
Good vid! Would really appreciate some assistance from the community - I have now bought two NEW Warthogs (Throttle and Stick) for Win 10 PCs. First machine, tried everything - no joy. Read through Thrustmasters instructions, tried everything, but it would only ever recognise the throttle (in both device manager, controllers as well as the TARGET software). I spent hours trying everything I could. Could not upgrade firmware to both devices, either.
Thinking it was a faulty stick I emailed Thrustmaster - good luck, they advice 15 days for a reply (insane!). However, enthusiasm to play MS Flight Sim 2020 overcame me, and I sent the the first unit back to Amazon and purchased again, directly, from Thrustmaster (yes, I know!). Poor comms but very quick delivery.
And it still does not work! Same issues - on my first attempt at installing, my PC recognises both Throttle and Stick. I then updated tyhe firmware for both devices, and installed software, and again, onyl the throttle was recognised. Uninstalled the drivers, restarted machine, tried the same thing over and over, and it only recognised the throttle.
Any ideas? Much appreciated it. Surely I can't have had two new duff Warthogs?
Possibly a usb issue or it’s not plugged in properly, happened once to me on the same stick ( Warthog Hotas combo) I disabled power management on usb in device manager.
I am the video poster... I lost access to the account I made this video on but I think I know what your issue is. I'll try to make a video within the next week or so detailing how to fix this. I'll post a link to it in the comments.
wheres part 2? :(
how do i bind my slew controll to act as my mouse?
hello I can't even start that program because it says that Thrustmaster fast isn't running please help me
всë понятно👍ОК жалко не на Русском.
hi mate,target make profile in fcf ,star citizen need xml how i convert that .Thx
Hi there, Great Vid thanks. I've got the same setup as you .. T1600 ,peddles and Throttle. I notice it looks like you have a config for X-Plane 11 ? I'm trying to find a setup config for this and having no luck. would you care to share yours? I could then just tweak some a little if necessary or use your config as is.
Thanks in advance
Are ya gonna do part 2??
i cant even run the programm hmm
i downloaded it but cant open
Doesn't work for me.
i am trying to do this now but the download buttons are not working none of them i just bought this piece of shit thing and already there support is failling
The software for this is terrible to use this is part of the programming crisis which is everywhere.
very low volume
can't hear you
Your audio is too quiet.
I do not see the page at 7:53 Where is that page?