Mercedes B150 W245 gearbox issues... Fault finding and repair.
Вставка
- Опубліковано 10 лют 2024
- Consider to support my channel and all the hard work put into it at / lmautorepairs
Thank you
Hi
This car came to me with an intermittent fault...
Although I never managed to experience the fault, the owner testimony and the fault that came up on the gearbox, made me to make a call and remove the culprit faulty part...
Follow me on this video to find out what was the problem and how to resolve it.
Videos mentioned:
Mercedes Turbo Actuator: • Mercedes ML320 CDI tur...
Meriva Engine ECU: • Vauxhall/Opel Meriva 1...
Hope you enjoy the video.
Any questions or comments put them below.
Like always, thank you for watching! - Авто та транспорт
Thank you for another great video!!!
Thanks!
👍👍👍
great explanation!
☺️
Thanks!
👍👍👍
Very nice job.and thank you
☺️
👍👍👍
Hi interesting video I had a mercedes b class with same gearbox I sent away that module but they said I was OK in the end I scraped it old 55 plate but only had 80.0000 gearboxses are not fit for purpose in my opinion with modern cars sepose to be progress but its progress going backwards I this video will be of interest to anyone that has gearbox problems with these mercedes models. Thanks. 46:15
☺️
👍👍👍
good morning Luis
☺️
Hi there!
👍👍👍
Hi , I really enjoy your videos, a lot of effort put in by you. I was wondering what Autel scanner model you use. I'm thinking of splashing out as my chinese copy Delphi copy unit is unreliable and doesn't fully connect to my bmw 420.
Thank you.
I have the MS908P...
I believe it has been superceded by a different model, but you can check that out on the Autel website...
👍👍👍
Yay!
☺️
👋
Hello. I change my TCU i buyd from aliekspress brand new one with programming. After replace i got p0730 fault gear ratio?
I filld 5 liter gear oil. What do u think is the problem?
Good video. I normally watch every video you post on the same day. I need some advise for buying the scanner, I believing that you are using Maxisys. Which one you suggest for using on volvo. Please let me know the model number. If it is Maxisys please confirm the model.
Hi
If you need it just for volvo, get Dice VIDA...
👍👍👍
Hi,
Thank you. Great videos.
I have the 2008 B170 (245) with an intermittent hunting problem at intersections when hot.
Do you have any suggestions? Also, do you know where the fuel filter is on this vehicle?
Have you scanned the car?
👍👍👍
Some of your customers are not well. Getting your car fixed without gas in the tank is sick. I call it a symptom of suspicion that the repairman is a thief and will steal fuel from the client's tank.
☺️
I get all the time..
👍👍👍
can i ask you a car question about volvo?
does s60 mk2 or v60 2011 need volvo vida genuine software to program a car stereo same model from other volvo car or is it plug and play?
regards
I never had to replace one...
So can't really advise...
I would guess they are coded to the VIN of the car, and will require vin changing...
But it it only a guess...
Sorry...
Volvo vida until 2014 is free. Work with any good Passthru adapter. So try youself.
top
Thanks!
👍👍👍
Where are you based
😊👍
👍
Send contacts of the company that helped you to repair the mechatronic
Hi Mate!
How much is final price to fix that problem?
Thank you!
I guess it depends where you take it, hourly rates, etc...
👍👍👍
Hello, I have a Mercedes B150. When I change the transmission mode to D and shift, the car does not shift after the first shift, but if I press the gas, the car shifts but is not in the best condition. I went to a person and he told me to recode the transmission. Please help me.
Any faults stored on the transmission ecu?
👍👍👍
it's a shame, there are more and more words and less repair in your videos
But thanks
By reading you comment it seems like the car was not fixed...🤷♂️
But thanks
@@LMAutoRepairs It's just an observation meu amigo, I've been loyal to your videos from the beginning 💪
Greetings fromage France
Thanks!
👍👍👍
Frog wires, like it. Jumper wires. Can't imagine for a second the repair companies will be touching the interface connections on the MCU etc. They just reconnect the jumpers on the main PCB. Silver based solder. Still, it is a fiddly job. Trouble is, customers think it's all easy and they're getting ripped off all the time. Blaming everyone else if something goes wrong instead of the real cause - buying crap cars. Not like there isn't the info out there on what goes wrong with em nowadays.
☺️
Very true...
👍👍👍
... bro to be honest i thought you will repair that , :( , not send to repair , is not difficult to repair that problem
And I would...
Just could not afford something to go wrong and me to be responsible for it and have to support the costs of doing it again...
Remove the unit is not easy nor a 5 minutes job when done like this on the floor...
This way, if it came back, was not my responsibility...
I had to do something that you on that side didn't...
I had to assess the situation, the type of customer etc...
But yes, I could have done it...
I did this type of work in the past, and I have videos coming doing similar stuff...
Thank you for watching and for your comment.
👍👍
I know it's petrol ... Because I had to put some in 🤣🤣🤣
☺️
👍👍👍
How much did you charge the owner? Pls do tell and not be like that company. 😅
Stay tuned...
I will be showing everything!
👍👍👍