HORN NOT WORKING ON BMW. HOW TO TEST HORN

Поділитися
Вставка

КОМЕНТАРІ • 20

  • @paulhoward4981
    @paulhoward4981 Рік тому +1

    Hi Michael, thank you for taking the time to reply. I did try the meter for continuity and there was a problem. I watch the above video and took the horns off the BMW Z3 and tested as above video. There was no sound, so thinking the horns were caput, I drove to a scrap yard and brought two more horns for £10. Drove home and tested as the above video and no sound. I also own an MGB with the horns working so I took one off and tested as the above video. It didn't work so reattached it to the MGB and the horn worked. Put the original horns back on the Z3 and they worked. It is what you call a mystery.
    However, though this all took an awful lot of time, it did show that the above video on horn testing did not work for me. All the best, Paul.

  • @TheBrothers759
    @TheBrothers759 4 роки тому +2

    You guys are the best. Never stop!

  • @KingLoyalGaming
    @KingLoyalGaming 3 роки тому +9

    This guy talks like the meat ball from aqua hunger force

  • @rashidahmad6218
    @rashidahmad6218 4 роки тому

    I know sir I am auto electrician AC what I you video a very good have like it

  • @heroldlabissiere278
    @heroldlabissiere278 2 роки тому

    2008 BMW 335i show me how to find the horn relay.

  • @ajgould931
    @ajgould931 2 роки тому +4

    Great videos but he definitely says “guys” way too much😂

    • @Deborah-op6jh
      @Deborah-op6jh Рік тому +1

      Do you people complain about every little thing?
      Another of Northern people and military people say,You guys....guys is just a general term to include everyone. Instead of a certain gender.
      Stop complaining...Guy🤓

  • @davidblackburn9169
    @davidblackburn9169 2 роки тому

    Hi recently bought a e60 530d and realised the lead was disconnected behind the steering airbag.. Airbag needed replacing anyway. But when connected in.. horn stays on and even after a replacement airbag part has been put in also changed the clock spring ring im stuck 😬

    • @ShiftingSkys
      @ShiftingSkys Рік тому

      Shorted Contact, Shorted Wire, bad Switch or Bad Module.

  • @beneye1
    @beneye1 2 роки тому

    Mine acts the same way but after a couple of pumps it honks.

  • @VAIBHAV-05
    @VAIBHAV-05 3 роки тому +1

    NAME OF THE HORN?

  • @GRequinBlanc
    @GRequinBlanc 3 роки тому +2

    Why not simply do a continuity test?

    • @paulhoward4981
      @paulhoward4981 3 роки тому

      Hi Guys, I tried testing 6 horns the way you suggested, connecting directly to a 12v battery. Four of them BMW and 2 from a 1975 MGB. All six horns work perfectly when fitted to the cars. Not one of them honked when connected directly to the 12v battery. All I am saying is, your horn test did not work for me. I did get led astray by following your video which cost me a day before I found it was the BMW horn push on the steering wheel.

    • @ShiftingSkys
      @ShiftingSkys Рік тому +1

      @@paulhoward4981 WHy not just use a power probe and do it. How would this take you half a day? a Horn just needs power and ground so if you feed a Horn power and ground it will Blow...

  • @electroporsche911
    @electroporsche911 6 місяців тому

    Please enhance your voice

  • @novazz5726
    @novazz5726 Рік тому

    what !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • @jensgerdes45
    @jensgerdes45 2 роки тому

    5000 oks to many…