Node-Red: Read Omron PLC using Node-Red

[@Pray-Tech_Robot_PLC_PAZ]

mantap ini yang saya cari, terimakasih atas berbagi ilmunya, in-syaa ALLOH manfaat.

[@JBCFAUTOMATION]

Could you also share the plc programming.

[@sabbirjunk6059]

HI, You showed the plc connection status in dashboard taking response from function node not from FINS Control node. So, the plc connection status shows connected while press the "connect PLC" button though plc is not connected . Could you please let me know, is there any way to capture response from FINS control node as dashboard shows the connection status only while plc is connected or not connected .Thanks in advance.

[@YaserAliHusen]

Hi,
Sorry I cant access the PLC anymore,
I borrowed the PLC for testing node-red fins.
You can try connect the PLC by yourself
Just trial and error

[@ekbal2251]

hello sir, is this method exactly the same if I use Omron CP Series? or different, so there are settings that need to be changed?

[@YaserAliHusen]

No different for PLC series CP,CV,CS,CJ,NJ, and NX

[@ekbal2251]

@@YaserAliHusen So, if I have downloaded the file in the description of this video, then I connect the PLC to my computer using LAN/Ethernet, so it can immediately sync using the file in the description?

[@YaserAliHusen]

@@ekbal2251, you must configure the node fins based on your PLC.
It is only read and write test
Of course you can develop more application with this nodes further

[@ekbal2251]

@@YaserAliHusen then, what are the steps to configure node fins with my PLC Omron CP1L-L?

[@jolalla1]

Node red crashes when the connection to plc drops!!..What could be the issue and how do we work around this issue?

[@YaserAliHusen]

Hi, I am sorry, I don't have experience about node-red crash when connected to PLC,
by the way, what is node that you used?maybe you can try to use another similar node.
You can find the answer in discourse.nodered.org/

[@jolalla1]

@@YaserAliHusen hi, I am using the fins read node for Omron plc:CJ2M series
The node works absolutely fine, but when the Ethernet connection switches off, node red crashes

[@fun_tech]

Pak apa pernah mengalami koneksi fins bermasalah setiap deploy program node red ? Sehingga mengharuskan untuk restart PLC
Siapa tau ada solusi pak, terima kasih

[@YaserAliHusen]

Saya pribadi belum pernah mengalami harus restart PLC, repot kalau harus restart PLC yah.
Nodenya sudah sesuai kah? Jika cukup cabut koneksinya saja apakah bisa?

[@mehmetfurkanackgoz1253]

Hi Mr. Husen. The video was very benefically for my project. I want ask some question to you. How can I reach you ?

[@YaserAliHusen]

You can send email to me at [e-mail]

[@PrayitnaSaragih]

SA1 ini di isi ip node red, itu kenapa 179?

[@efaraah]

Hi sir, can we write the data thru node red?

[@YaserAliHusen]

Yes, you can write data to a memory address in Plc

[@virionz2968]

untuk settingan konfigurasi buat CPIE bagaimana ya??

[@YaserAliHusen]

Mohon maaf saya kurang mengerti tentang CPIE, CPIE apakah memiliki ethernet port?
Node Ini hanya untuk PLC yang memiliki ethernet port

[@wanmuhammadnorshahid3749]

can iask some question mr husen ?

[@YaserAliHusen]

You can send email to [e-mail]

[@Surya45-iz8hq]

Versi PLC mitsubishi ada kah?

[@YaserAliHusen]

Sepertinya ada nodenya, coba aja cari di manage palletenya

[@Ch4fe-C0ffe]

Como fazer com python e omron

[@rzqmlna124]

Serial ga bisa ya pak?

[@YaserAliHusen]

Saya belum pernah coba
Mungkin bisa pakai node yang lain