DIY How to Build a Wheel Chair Ramp that’s Removable (Complete Guide)

00:43 The Tools
Tools:
*Circular Saw - amzn.to/3eIFC3W
*Drills - amzn.to/3bb9t2S
*T-25 Torx bit - amzn.to/3bpV6rs
* 1/8 drill bit - amzn.to/3hlH4v3
* Square - amzn.to/3vUn4U8
* Tape Measure - amzn.to/3bg83nI
* Chalk line - amzn.to/2SSUrsx
* Pencil
* 2in t-25 exterior screws - amzn.to/3fn0TQ6
* 2-1/2in t-25 exterior screws - amzn.to/3ffU5Uj
* 3in t-25 exterior Screws - amzn.to/3bp7lEV
* Paper - to draw out your design
Pressure Treated Wood:
* (1) 2 x 6 x 12
* (1) 5/4 x 6 x 8
* (1) 5/4 x 6 x 12
Chapters
00:00 Intro
01:27 The Fix - how to measure it all out
04:10 The Header & Rail Cuts
10:02 The Runs Cuts
10:34 Putting It All Together
Check out my website at mcfixit.us
Disclaimer:
Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.
#mcfixit #wheelchairramp #diy
--
Supplies used to record this video:
* GoPro Hero 7 Black - amzn.to/3a1uKLU
* 256GB Flash Drive - amzn.to/3a1ilre
* Vlogging Frame - amzn.to/2Rq7kJL
* GoPro Pro 3.5mm Mic Adapter - amzn.to/3s1MNb2
* Youmic Lavalier Lapel Mic - amzn.to/3mB0KeV
* Boom Stand - amzn.to/3mCFg1b
* 5/8” to 1/4” adapter - amzn.to/3wIJ5Xf