Toyota Vitz Idle Code Enabling
Вставка
- Опубліковано 23 сер 2024
- Toyota Vitz Idle Code Enabling is necessary if you disable this idle code by working on your vehicle.
How to enable this idle code:
1. Plug out all electrical plug-ins on your vehicle and turn all electrical loads.
2. Start your engine and allow the car engine temperature to rise to normal.
3. Switch the car off then leave it for about 3 minutes. (if the temperature is already at normal this step is not necessary).
4. Switch the ignition to ''ON'', then to off. To ''ON'' again then to off. To ''ON'' and start this time.
5. Press the brake then put the car in drive and wait for about 1 minute.
The car should be enabled for idle.
JUMP START BOX
If you need to Jump Start Your Car, the Jump Start Box if for you. Click the ling below for more details.
amzn.to/3xQtLIf
BLUE DRIVER SCAN TOOL
Need a reliable but affordable Scan Tool then the BLUE DRIVER SCAN TOOL is for you. Click the kink below for more details.
amzn.to/3iMNkLb
I salute you for this info. My Vitz worked perfectly. Thank you and God bless you.🙏
Nice explained I have the same model of Toyota vitz that you showed in video
I did it and it worked. Wow. Thank you so much.
Nice explanation
Thanks bro appreciate it.
My car is manual, how do i do this?
you are confusing people with idle code.i will explian, when you remove your battery cable or have change battery, your car program is mess up, your car with vibrate roughly when idle. so you need to do what the video says, you need to let it sit on Drive mode for minimum 5 mins, it will re program itself and will idle normally. if you dont do this step after chaging battery, your car will never re program itself and will continue to vibrate on road with drop rpm, engine will vibrate so much
But I have an Automatic how can I do that
Automatic Engine Idle Code Setting
If your vehicle is ideling a bit rough and you have previously removed the positive terminal from the battery and there is no error codes after you done a scan, follow the procedure below:
1. Remove the positive battery terminal and reconnect after about 1 minute.
2. Turn on the vehicle and leave the engine running for about 5 to 10 minutes.
This will automatically cause your car to re-learn engine idle code settings.
Do we have to keep the foot on brakes all along the re-
learning process?
Only before you start the engine and keep pressing until the one minute has lapsed.
What's the D-S mean ?
If you notice on the gear selector in the automatic transmission Toyota Vitz/Yaris there is this D S slot for selecting drive or a lower gear ratio S.
1. When you select D for drive you are ordering the transmission to select the best gear ratio for the speed of the vehicle.
2. When you select S you are ordering the transmission to select only a set of lower gear ratio. The transmission will not select any gear out of this ratio configuration.
@@ShelDockToyotaVitz So that signifies how fast or slow you want the car to go.?
When i start the car this sign appears. But after some time it dissapear.. Is it a problem
That's how it should work.
How did you started the car at third time? Did You pressed break ?
You switch the key without starting but the third time, thats when you start the car.
I have done that is the same
Sorry you still have this problem, but is your check engine light on at any time?
@@ShelDockToyotaVitz no it not coming on
Once your check engine light is off this means that your electrical system is good.
The problem is a partly clogged system.
1. Ceaned the injectors, fuel pump filter or replace the fuel filter in the engine bay.
2. Clean the EGR valve
I was told that when parking any vehicle one must press brake then wait for the vehicle to stop completely, after pull the hand brake up and put the vehicle in neutral. After, put the vehicle in park and release the brake. Is this true
Once the vehicle comes to a complete stop with the foot still on the brake slide the shifter in park pull up the hand brake then release the foot brake. This is how I practice it maybe other persons do it a bit differently.
And the temperature one
I turned on my car, it shows red.
If you switch on your vehicle after it was parked for more than a hour the temperature indicator should not show red. The indicator should show green. If it shows red after being parked an hour or more something could be wrong with the indicator circuit.
❤❤❤❤❤❤❤❤❤❤❤❤
I have done everything you said but still vibrating for Toyota yaris 2012
What conditions causes the vibration?
I have the same vitz model. I have just replaced the battery and I see that an automatic stop start is activated. When I stop the car with my foot on the brake, the engine cuts out and restarts when I release the brake. what is the cause?
Hey how are you doing
I have a car like this, but no lights is coming in the dashboard. What could cause that problem
Designers build engines so that if the oil is not touching the dipstick but still enough is there to lubricate the engine the light will not come on unless it is critical.
What happens if idel code is disable
If your idle code is disdisabled follow the procedure in the video to enable it again.
My Vitz car suddenly behaving strangely. when I stopped the car and made it to Parking mode, the car automatically stopping and starting?? why? It is a push button for start. but when I move the gear to Reverse or Drive it is behaving okay!!
Do you have to restart the engine when it stop?
No it is restarting automatically!!
@@krishnapillaimanivannan2309 some vehicle is designed so that the engine turns off when the vehicle comes to a complete stop and restart when the accelerator pedal is pressed.
If this is what happens with your vehicle, maybe it's the design.
My toyota vitz is leaking oil could that cause it from not starting I turned it on but it is not starting
This should not affect the starting of any vehicle as long as the engine oil is touching the dipstick and even beyond this engines still starts.
Have a catalyst code problem any idea
Remove your oxygen sensors, clean them properly removing all the chalk like dust (sometimes difficult to remove- use a fine sand paper) and you should be good to go. Remember to erase codes after you are finished.
@@ShelDockToyotaVitz I did all of that I even changed the catalyst but code still coming up
@@paulwilliams7951 the other option is to check the oxygen sensors and if they are ok the next check is the wiring from the computer to the sensor.
@@ShelDockToyotaVitz you do checks personally?
@@paulwilliams7951 yes I do, that's how I gain my experience.
When i start my car the sign appears but goes after some time so it means mine is enabled?
Once your vehicle idles smoothly it means your idle code is activated.
In newer vehicles to enable a idle code just turn it on when the engine is cold and leave it throttling for 5 minitus and thats it, your idle code is enabled.
When that light goes out it means that your car engine reaches normal operating temperature.
The engine is not starting. Please suggest a solution
You definitely need a mechanic to check this problem. It could be as a result of anything that can go wrong.
1. While starting the vehicle get someone to pull out each coil pack from the spark plug and listen for the arcing sound. If arcing is given for each plug you may have a fuel problem.
Man where we have to put water In bounat
What do you mean by idel code
This is a software installed in the ecm to manage the engine operation while it's ideling. The software will always remain in the ecm by can be disabled if the ignition at anypart is disconnected.
wts is the purpose of idel coding
@@DanishKhan-ej8hk for running better and smooth engine without vibration while your car idling.
Can someone plz help... 1 2 times when i stop my car on red lights or stop sign..my engine turn off... i change my air filter and clean my throttle.. but problems continue..
Any solutions...its a toyota vitz 2011...
Check your spark plugs if they have oil on them. Also remove the fuel pump and clean it along with the pump filter.
If they have oil what’s the cause of them getting oiled
@@warrenmmutsigwa617 valve seal leaks.
if car is push start then what is the procedure ?
Not all vehicle has automatic idle code enabling, how all modern cars now a days has. If you have a push button vehicle your car should have automatic idle code enabling.
@@ShelDockToyotaVitz Actually, that might not be quite true, it depends on the age. My 2012 Vitz is push start and it does not automatically re-enable the code. So I had to use your method and it actually worked. @Asad you probably have this fixed already, but just in case... For push start, you would press the start button with your foot OFF the brakes, that will turn it on without starting the engine. Then when you are on the third attempt you just do the usual and press the brakes and press start to turn on the engine.
@@taniquepalmer Love this comment. The suggestion is that if you try the automatic idle code enabling and it doesn't work then the other option is to use the manual idle code enabling.
For push start, you would press the start button with your foot OFF the brakes, that will turn it on without starting the engine. Then when you are on the third attempt you just do the usual and press the brakes and press start to turn on the engine.
Hi i have a big problem with my Toyota vitz engine vibration and my car trunk gets water inside it. Can u tell me what should i do
Follow this guy vids. I did and found that there are simple DIY solutions to reduces vibration greatly. Check the rubber seal around your hatchback door frame and hinges for signs of water seepage
I advise Toyota Vitz 1KRFE engine owners with K410 CVT transmission to drop the transmission pan and change filter and use original Toyota CVT - TC fluid at around 40,000KM
A little DIY home effort and you will be satisfied with the results. No experienced mechanic is needed. Just follow step by step procedures or post your comments and or questions
@@ratpoision9298 you mean CVT-FE fluid
@@furve no my 2006 Toyota Vitz is TC type CVT fluid. Check the big 22mm refill nut at the upper side of the transmission it is marked either TC or FE