Guitar Neck Full Build - Laminated Neck with Epoxy Resin Logo - Pinoy Guitar Builder
Вставка
- Опубліковано 3 чер 2024
- I Built a Laminated #guitarneck with an Ebony CNC Carved Logo that is inside an Opaque #epoxyresin The Video Contains Guitar Building Technique, traditional and modern technique. From Chisel to Table Saw and CNC Machine. With lack of funding, I built my own tools like the CNC, Band Saw and Jigs to make Guitars.
I will build a Les Paul Type Resin Guitar that will fit this Neck, so better subscribe and turn on the notifiction so you'll be updated.
You can support me on these platforms, but if not, a like and subscribe will be highly appreciated.
Patreon:
www.patreon.com/user?u=55119849
Ko-fi:
ko-fi.com/gitaramaker
INSTAGRAM
/ gitaramaker
FACEBOOK
/ mrgcustomguitars
I BUILT AN IBANEZ RESIN GUITAR - PINOY GUITAR BUILDER
• I BUILT AN IBANEZ RESI...
I BUILT A JAZZ BASS EPOXY RESIN from an OLD LOG
• Amazing Transformation...
Intro 0:00
Cutting Materials - Table Saw Jointer 0:10
Guitar Neck Glue & Clamp 1:25
Squaring the Neck Blank 2:39
Hand Saw Band Saw Angled Cut 3:21
Angled CNC Jointer 3:42
Angled Neck Glue 4:11
Flat Leveling - Headstock Face and Neck 5:03
CNC Carve - Headstock 5:16
Truss Rod Cavity 6:27
CNC Neck Shape 7:04
Neck and Fretboard Glued 7:45
CNC Carved - Logo 8:30
Resin Pour 8:45
Headstock and Neck Exact Thickness 9:21
Manual Chisel Carving 9:59
C Shape Neck 10:27
USing Shinto Rasp File 10:46
Chisel Carving - Heel 11:10
Rolling Pin Sander 11:28
Fret Slot 11:41
Fret Radius 12" 12:03
CUtting Fret Wires 12:11
Fret Wires Install 12:30
Fret Wire Edge File 12:41
Fret Leveling 12:51
Fret Crowning 13:00
Bone Nut Install 13:15
Fret Sanding / Polishing 13:38
Dot Inlay Install 13:47
Electric Sprayer Finish - Sanding Sealer 14:20
Tuning Machine / Peg Install 15:16
The Breathtaking View 15:41
Camera:
Sony Nex5T 16-50mm Lens
Music from UA-cam Audio Library:
Gently, Onwards - ELPHNT
Oceans, Rivers, Canyons - ELPHNT
Dulcinea - Steve Adams
Melting Sands - ELPHNT
Monument - Track Tribe
#resinart - Навчання та стиль
Here's the Full Guitar Build
ua-cam.com/video/OEM9LNwK65c/v-deo.html
That epoxied logo is a brilliant idea.
Thanks 😊
Ya you must’ve been pumped when you made it!
Always pumped and excited 😊
Epoxied? You made up a new word! Lets hope it get recogonised!
Galing, sir. Inspiring and relaxing ang video.
Ganda pwd panapat sa mga hi end guitar
your a artist gitarboulder, very good.
thank you for uploading the video.
been thinking of making one too!
Hi from South African vloggers 🇿🇦 😀 ❤️ 🌍
Hello there South African Vloggers! Thank you for watching 😊
Love this video! Thank you for sharing!
You're welcome and thanks for watching 😊
Ang lupit... ang galing... salamat sa pag video..😀
Thanks! Gagawa po ako ng Pick-up and body sa mga susunod na video. 😊
@@GitaraMaker Aabangan ko po yan.. very satisfying po panoorin ang mga build mo pre... at nakakaproud kasi pinoy luthier...
Yes! salamat sa support brother.
Na subscribe na kita idol gustong gusto ko kasi nanonood ng kagaya nito lalo pag acoustic na gitara..
Salamat po sa supporta! Gagawa din po ako ng acoustic, after siguro ng isa pang electric and isa pang Bass.
Ganda ❤️❤️❤️
Salamat brother 😊
@@GitaraMaker your channel deserves more subscriber sir share ko sa mga groups kung ok lang.
Sure brother, highly appreciated bro thanks 😊
❤❤❤❤
Galing galing kuya Marlon! 😁
Thanks Jorj! Para yan sa LP, next ko na yung body.
@auraldriftstudioph yung Ibañez mo di ko pa matuloy, nasira laptop ko bro, may issue sa ibang laptop yung CNC, nakakatakot isalang yung Ibañez. Planuhin ko sa manual router.
@@GitaraMaker abang abang lang ako sa kasunod nito kuya. Walang kurapan mula umpisa hanggang dulo. 😁
Salamat sa suporta brother 😊
Can you open a bottle with that headstock?
saan po makakabili niyang mga parts ,like Top ang Back and side ,fret wire and neck??
gagawa rin sana ako para matoto ako..
Not sure whether soft wood like spruce is a good idea; it'll work more than the others. Makes me wonder about long term stability. Better use maple or beech I think if you want a pale wood.
Yeah I ran out of wood and these are my only options and lighter colored wood is very rare in my country. The neck seems to be ok after 5 months, hopefully it'll last long.
no worrys, itl be ok still
Great job as always. What software you use on your CNC machine?
For operating the machine it's "Laser GRBL" for Windows and there's also for android which is a bit buggy "GRBL Controller". I use "Easel by Inventables" for designing and creating tool paths.
@@GitaraMaker Thanks for your response. I built my CNC too and I’m using Mach3 to run G codes and Vcarve pro for designing and tool path.
Oh I've seen Mach3 on UA-cam while searching for grbl software after building the CNC, I just couldn't find where to download it back then so I settled with what I found.
Magkanu mag pagawa?
Sir Paturo naman po paano gumawa guitara pangarap ko makagawa ng sarili kong guitara huhuhu😭🥺🥺
Sir paano mo na build yung cnc machine mo? Ang ganda po kasi eh.
Salamat po! Pina-plano ko po kung pano ko sya ifeature dito sa UA-cam, madami ding nag-rrequest. Pati din siguro kung san ko nabili yung mga parts.
Sir nasa headstock ang scarf mo?
Nasa neck banda bro, pero dati meron akong ginawa nasa headstock yung scarf, tinakpan ko ng thin wood layer sa headstock para di halata.
Ah d kadi makita ang joint Galing. Yong aking nasa ilalim banda sa 3rd fret...
@@tarsiousmunalembohol same din sa'kin bro nasa 3rd fret. Mahirap lang din makita sa video.
@@GitaraMaker anong scarf angle mo?
15° bro
WAIT WAIT WAIT!!!!! You built your own CNC machine....? Ummm..... How?
Yes I did. 1" tubular for the frame, I got most of the parts online through China - bearings, stepper motors nema17, Arduino, CNC sheild, etc. I'm using Rotary for the motor, I can also attach laser. It took me a month to build, but operating is the hardest, need to study CAD CAM operation.
Pwd pagawa ng lefty guitar? Magkano po?
@Mhar Jamz sorry brother, gumawa ako ng guitar only for a few close friends, wala pa akong permit to sell these legally. Maybe auction later yung mga future builds. Lefty guitar sounds a great idea bro for a content.
@@GitaraMaker salamat idol.
Good build. I would have been able to watch more without the repetitive music
Thanks! Will try to make it better on my next videos 😊👍
@@GitaraMaker right on!
Was there a music in this video? 😲
sexist headstock I ever saw
Thanks! You can check out the video for the body of the guitar. 😊