Also bidding what products I have lots of questions and I know I'm asking alot but I'd be forever grateful and give credit where it's due as well as help you as much as I can to give back from now on again I hope and wish to hear from you I feel you have so much to offer and you advice won't be wasted by me
Jordan Sherbon for some reason your comment snuck through the cracks and we are only now seeing it. Please call us at 1-866-399-5562. We would love to speak with you and get you started.
Absolutely! It's important to have a fire extinguisher nearby. While our RY10 Melter are designed with safety in mind, we strongly recommend having safety gear and equipment on hand when operating the machine.
Everything’s looking amazing for 2023 and remember, it take world class action to yield world class reaction. The more proposals you get out the more business you’ll close and thrive from. Read this - info.asphaltkingdom.com/pivot-to-thrive
Great question! If you have leftover material, you can leave it inside the equipment and heat it up again when you're ready to use it. However, it's recommended to clean it out completely after 5 uses to avoid the risk of charring rubber in areas where multiple layers may have built up. To clean it, heat up the equipment and scrape out the material with a scraper attached to a broom handle. Then, start fresh with a brand new box of crackfill. We hope this answers your question. If there's anything else we can help you with, don't hesitate to ask!
If we purchase this product can we purchase a wand to go on it so we can spray the oil into the bottom of the pothole so the pothole mix stays in the hole better.
@@pablog4852 thank you for the comment. General business and contractor licensing varies greatly from state to state. Florida being one of the strictest, to my knowledge. Also, important to note that within some states, Florida in particular, also have local municipality/city licensing requirements. We do not have thorough documentation of what various states require. I did find this link that has helpful info… www.homeadvisor.com/r/state-by-state-licensing-requirements/
@@AsphaltKingdom ok awesome thank you for the reply. One more question, bouncing off what you stated, would parking lot line striping require a license in your state? I feel like you wouldn't since you're not altering or building anything but I'd like to get your thoughts. I really want to start with line striping as a business. thanks again!
@@pablog4852 it’s really best to check with your state authorities as they are ever changing and we wouldn’t want to mislead you. Many stated don’t require but some do and again they are ever changing.
@@AsphaltKingdom How long does it take to melt a cube of hot pour...we need a ton of this stuff. Do people get the 30 gallon bigger one and us the 4 gallon dispenser?
CinePost great question! With our pro units it takes about half the time it does with regular torch models. Pro push melters take about 20 minutes to melt a complete block of rubber. Once you have melted rubber in your kettle it is much faster to melt down additional blocks. Similar to having hot water in a glass and adding ice cubes in. They melt faster in the hot water 😉. Many of our clients who Seal cracks on large parking lots or roads choose the RY30 PRO stationary kettle along with the RY10 PRO, yes! This allows you to have crack sealer that is constantly melted down and ready to apply at waking speed. Checkout the RY30 PRO at www.asphaltkingdom.com/30-gallon-crackfill-melter-oven.html
This particular unit is actually extremely affordable and a great bang for the buck. There is also a Pro model that includes an enclosed burner and melts crack sealer down 50% faster than torch models. Well worth the money to increase your crack filling efficiency - www.asphaltkingdom.com/ry10-pro-crack-seal-machine-grouped.html
Get Your RY10 PRO Today - www.asphaltkingdom.com/ry10-pro-crack-seal-machine.html
Love the dude with the sandals.
Brave soul for sure, I caught that also,, gav my feet a blister just seeing that,,
A great piece of machinery for this line of work. Well done from New Zealand 👍🏽
Thank you for your kind comment. We appreciate you!
Also bidding what products I have lots of questions and I know I'm asking alot but I'd be forever grateful and give credit where it's due as well as help you as much as I can to give back from now on again I hope and wish to hear from you I feel you have so much to offer and you advice won't be wasted by me
Jordan Sherbon for some reason your comment snuck through the cracks and we are only now seeing it. Please call us at 1-866-399-5562. We would love to speak with you and get you started.
Do u recommend having a fire extinguisher nearby? I recall roofers have to.
Absolutely! It's important to have a fire extinguisher nearby. While our RY10 Melter are designed with safety in mind, we strongly recommend having safety gear and equipment on hand when operating the machine.
What’s the widest crack this machine can fill?
Hi! You can fill cracks as wide as 1" and deep as 1", if it's more than that you would need to use filler materials such as a baker rod.
I need to add this to my set up...year 4 upcoming....last year was awful - economy killing year
Everything’s looking amazing for 2023 and remember, it take world class action to yield world class reaction. The more proposals you get out the more business you’ll close and thrive from.
Read this - info.asphaltkingdom.com/pivot-to-thrive
Where can I get those open toe safety sandals
I don’t have any need for this machine, but I want one.
Mark Rosen we appreciate you and are always here for you!
Can the machine used in mastic material?
Good morning! This RY10 cannot be used for mastic but We do have a mastic applicator at www.asphaltkingdom.com/mastic-applicator.html
Do you need to ever clean these machines out? So the tar doesn’t harden?
Great question! If you have leftover material, you can leave it inside the equipment and heat it up again when you're ready to use it. However, it's recommended to clean it out completely after 5 uses to avoid the risk of charring rubber in areas where multiple layers may have built up.
To clean it, heat up the equipment and scrape out the material with a scraper attached to a broom handle. Then, start fresh with a brand new box of crackfill.
We hope this answers your question. If there's anything else we can help you with, don't hesitate to ask!
How much does it go for
We have a variety of push melter applicators for sealing cracks right here and ready to ship - www.asphaltkingdom.com/crack-filling-equipment.html
If we purchase this product can we purchase a wand to go on it so we can spray the oil into the bottom of the pothole so the pothole mix stays in the hole better.
The crack sealing machine is really designed to seal cracks and are not used for potholes. Are you looking for a tack machine?
@@AsphaltKingdom do you need or recommend a contractors license when doing this type of work? Great videos as always! Thanks
@@pablog4852 thank you for the comment. General business and contractor licensing varies greatly from state to state. Florida being one of the strictest, to my knowledge. Also, important to note that within some states, Florida in particular, also have local municipality/city licensing requirements. We do not have thorough documentation of what various states require. I did find this link that has helpful info… www.homeadvisor.com/r/state-by-state-licensing-requirements/
@@AsphaltKingdom ok awesome thank you for the reply. One more question, bouncing off what you stated, would parking lot line striping require a license in your state? I feel like you wouldn't since you're not altering or building anything but I'd like to get your thoughts. I really want to start with line striping as a business. thanks again!
@@pablog4852 it’s really best to check with your state authorities as they are ever changing and we wouldn’t want to mislead you. Many stated don’t require but some do and again they are ever changing.
Hey guy i bought ry10 3 years ago i need some parts for it where can i get a booklet with parts number
Jimdrex call us and we will help you out 1-866-399-5562
ITS NOT WHAT YOU KNOW ITS WHO YA KNOW
Jordan Sherbon bingo!
Great video, but Yeah, I can be doing this in my sandals? Those other guys are such amateurs!
CinePost couldn’t agree more! Never seal cracks in sandals. We always recommend boots and appropriate safety gear! #safetyfirst
@@AsphaltKingdom How long does it take to melt a cube of hot pour...we need a ton of this stuff. Do people get the 30 gallon bigger one and us the 4 gallon dispenser?
CinePost great question! With our pro units it takes about half the time it does with regular torch models. Pro push melters take about 20 minutes to melt a complete block of rubber. Once you have melted rubber in your kettle it is much faster to melt down additional blocks. Similar to having hot water in a glass and adding ice cubes in. They melt faster in the hot water 😉. Many of our clients who Seal cracks on large parking lots or roads choose the RY30 PRO stationary kettle along with the RY10 PRO, yes! This allows you to have crack sealer that is constantly melted down and ready to apply at waking speed. Checkout the RY30 PRO at www.asphaltkingdom.com/30-gallon-crackfill-melter-oven.html
We need one machine how can i buy
If you have saeler agency in yemen please send the address
We ship to any freight forwarder in the USA and Canada for international shipments www.asphaltkingdom.com/crack-filling-equipment.html
I’ll bet that’s a pretty penny
This particular unit is actually extremely affordable and a great bang for the buck. There is also a Pro model that includes an enclosed burner and melts crack sealer down 50% faster than torch models. Well worth the money to increase your crack filling efficiency - www.asphaltkingdom.com/ry10-pro-crack-seal-machine-grouped.html
@@AsphaltKingdom thank you for posting a number! Those other guys would never 👎🏼!! 👍🏼!