Це відео не доступне.
Перепрошуємо.
ShotMarker E-Target System: Unboxing, Overview, Setup
Вставка
- Опубліковано 16 сер 2024
- *See correction below regarding calibration
Full Story: ultimatereload...
Get yours here: www.autotrickl...
My ShotMarker solar panel: amzn.to/32hBpe2
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
Correction: When adjusting shot placement during calibration, you drag the "shots" to the location on the calibration target where shots hit (physically), *not the center of the target (unless shots hit the exact center). This is important when exact shot placement is critical such as in a scored match.
You've seen ShotMarker in my videos here on GavinToobe- now it's time to do an unboxing, setup, and configuration video! I'll guide you through the process from start to finish.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this UA-cam channel (gavintoobe).
Any reloading data supplied on this UA-cam channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this UA-cam channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this UA-cam channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this UA-cam channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- ShotMarker
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereload...
We have been using the the ShotMarker at our local precision rifle matches. We use it as a tie breaker stage. 5 shots 30 seconds. Shooter starts standing and buzzer shooter drops prone and sends it. I have tried it at 460yds and 600yds. Its super cool. Everyone huddled around the tablet. When a killer group prints everyone cheers. Its fun.
Based upon other reviews and alternative systems.
ShotMarker Pros:
I needed long range ie: >300 yards.
Visualization of bullet holes on target
ShotMarker Cons:
Time consuming set up and requires multiple backers for short and long range targets.
I did not need velocity at target.
Accuracy of bullet placement via TargetMarker was a source of error in other reviews. (Many possible reasons)
Some competitors loose matches due to inaccurate placement.
Requires taking pre-made target backers to hold sonic sensors.
My Final Choice
Longshot by Target Vision LONGSHOT LR-3 Long-Range Camera System w/ Bulletproof Warranty,
Longshot Cons:
$100 more
No Velocity readings (LabRadar)
Longshot Pros:
Quick setup
2 mile line of sight range
Actual video of target holes, manual marker placement/adjustment
No pre-made target holders required
Santa please bring this awesome machine to me for Christmas. I've been a very good boy this year 😁
awesome! I'm considering buying one and setting it up on a portable stand to take back and forth to my local range.
I just bought one . The video will come in quite handy!!
Thanks.
Any regrets?
Gavin,
I noticed you mentioned that you may make a target for a mile shot.
Its my understanding the projectile needs to be supersonic when it
passes the sensors, this may limit the calibers you can use at that distance.
I could be wrong on this, but I think I read it somewhere. All in all it looks
like a great device beats a camera!
Waiting for my ShotMarker to arrive, TOMORROW! Also picking up my Vortex Fury HD 5000 w/ AB over the weekend from Kenzie's Optics. Thank you for the GREAT video!!
Literally another video that I literally watched! This guy is literally a good UA-cam creator. I literally don’t know what else to say that would literally explain myself better. LITERALLY!
So do you need a internet connection ? Cannot be used in a remote area ? Or is this kinda like a Bluetooth setup
Thanks
2 min marker
Awesome, great work. Always thorough and to the point.
IF i ever get an opportunity, I'm coming over and stealing that mill. GOD I would LOVE to have that thing.
Not wanting to be a grinch but this is a great system for your own home range but not at all practical for us poor slobs who have to rely on public ranges for our precision shooting enjoyment. Thanks for the tutorial and demo.
What is the minimum size traget that can be used ?
The other thing that is cool with this unit is that if you're on the firing line and wondering how your closest competitor is doing, you can pull up his or her target and see how they are doing on their last string. Every targeting system that is on the same Access Point, everyone has access to all the targets on the bottom of the screen....
Why when calibrating did you move the shots to the middle of the target instead of where you actually hit the target?
Should integrate this into a multiplayer game, like bowling
I am a bit confused. Do I need to have my rifle dialed in so I am shooting bullseyes, then calibrate the Shotmaker to where my bullets are actually hitting? What if I have a new scope and am just somewhere on in the sight reference (on paper) and want to use Shotmaker to dial my rifle in? Never used one of these but want one. I shoot up to 1200 yeards with .338 Lapua. Should save me a lot of time and ammo. Just totally ignorant of the calibration procedure
If paper target is kept in the same place as when it was calibrated as center, you can use it to sight in your rifle. But yea you are right you need a sighted rifle to caliberate the shotmarker
Whats the trigger? Frequency? Decibel? Pressuredrop?
Looks like an awesome bit of gear but my question would be does it need to 'hear' the impact of the round on the paper to produce a result and if so, if you are shooting a magic group and the later rounds dont touch the paper, would it consider this a miss?
Cool system but does it permit multiple targets on the same sheet? I also wonder what replacement sensors cost because they do not appear to be bulletproof.
Steve Rowe we run it at 20+ lanes here. You can switch targets and if you have multiple targets set up at different ranges you can just switch from say 100 to 600 in an instant. The sensors it NOT bulletproof, they are made to be inexpensive and quick to replace if ever needed. Not sure of the exact amount though. I hope that explains it. Have a great day sir.
The replacement sensors can be purchased separately for $40.00 or $50.00 with the color bracket, all 4 can be purchased for $150.00 or $185.00 with all four brackets...
@@langora5804 I think what he is asking is can there be multiple bullseyes on the paper target. ie 8 aim points across the paper. I'm guessing but you may have to recalibrate for each aim point.
@@madman432000 it can be set up manu ways. It can give you group size, points, speed, es, sd, etc
@@donaldroberts8242 Not "break the bank, gonna' starve" costs, but could get expensive shooting ELR with high/variable winds and learning curve shooters. Anyone have a plan to shield/bullet protect the sensors? Would AR500 deflection plates in front of sensors negatively impact the sensor performance, accuracy.
I don’t have my own range yet, but I’m about 2 years out. Given that I’m a paraplegic and use a wheelchair this will be so AWESOME to have!!!
One question, can I zero my rifles using it?
Jeff Allen Thanks, that would definitely spoil my day. I guess that I could always use the spotting scope and paper target method.
No problem if you bore-sight at 100 and then zero. Something has to be real off for a shot to be 30" or so wrong at 100yrds. Have a good day.
Robin, Yes, you can use this for boresighting your rifles, but...
I would always start it out on a gong plate or into a clear dirt berm to verify you won’t hit the frame or even one of the transducers. Once that is done, you switch to ShotMarker and you are off to the races.
Another feature of ShotMarker not mentioned, is that in addition to showing lots of standard targets, you can always superimpose a grid of Mils or MOA. This makes exact boresighting very quick and easy in the example of a standard SR type target with round bullseyes.
The ShotMarker system will make your days at the range much more productive since nobody has to pull pit service and your distance is unlimited. Good Luck and Good Shooting.
Ok. This is just bad ass. High tech, but simple. Nice work. This is exactly what I've been wanting to do but had no idea somebody made a kit for it. Grt vid. Thx for posting.
Question 1: What vid software do you use to show the target being shot while you're on the rifle (the picture in picture function)?
Question 2: What scope cam do you use/recommend?
For Question 1, the software is already installed on your smartphone and any modern laptop or iPad type device. You first go to your settings and search for ShotMarker network in your WiFi settings. Once you find that and connect to it, go to your favorite web browser and type in 192.168.100.1 and you'll see the target system on your device.... HTH.
25.4 EXACTLY
So wouldn't say four shots as a box pattern be easier to move precisely to the actual poi, rather than all the shots right on top of one another??
Seems cool and all but what's wrong with a paper target and a spotting scope. Seems like it would be an expensive piece of equipment thats not really necessary. But if you have a lot money and don't like making trips to the target I guess it's a good idea.
Hard to see holes, particularly something as small as 223, even with a spotting scope at distance.
or if you send a bullet through one or more of the sensors and cable.
you can use the one target for multiple shooters. handy when you have 10 people in a comp, and only one or two target frames/shooting positons.
@@deltaskyhawk that's why you make sure you're within 2 feet of zero first :p
It can also eliminate the guessing game, when shots go through the same hole, or nearly the same hole, in a paper target; not uncommon, when shooting a precision rifle. F-class is 20 shots; it is almost certain that some or many holes will overlap, and the paper target will get blown out, making it harder to score accurately.
Where is the second video that gets into groups size and SD, velocity?
That is one hell of a cool toy. If you had two sets of sensors could you get average velocity between the two measurement planes and a good estimate of the arc?
Check into "mems" microphne techology. That's what they are using. The rest is just software. Excellent.
I am looking at buying one of Adams Shotmarker. Do you still like yours and use it?
would this work with 4.5mm Pellets and a 7.5J
Matchgun with 10m distance 🤔 a DISAG System is to expensive for me roundabout "2500 US$"
I love it!
Great
cool tech
Brilliant
Would a person need both the shot maker system and a lab radar? Asking for me. Lol
No price was mentioned. Probably cost a mortgage payment.
They cost $820.00 including shipping. Nice thing is you can shoot out to 2 miles with this thing and not need a spotter (once you get on target) as this will give you feedback right away. We use them at our 600 yard range for all NRA matches. I used 4 2x4x4's, 4 angle brackets, and a sheet of corrugated plastic to hold my target and I can shoot any day I want without a pit person...
Hi I want to purchase this sustem
A millimeter! I’m out🤣🤣
I must be really stupid. I still don’t know what this device does or achieves.
Anyone want to sell their used one?
Do you think there is that 1mm dispersion is because your target is behind the frame? Where it passes through the sensors is different than where it actually hits your target maybe place the target exactly with the acoustic sensors? Also, any chance we can get something different than an xring in the Future? No one uses MOA 😂😂😂
Супер 👍👍👍👍👍👍 тоже такой хочу.....
IS THIS WORTH $800.00 DOLLARS??!!!
$800. Nope.
Where's the link for the Shotmarker ? You have a link for the solar panel only.
Second link, as stated: www.autotrickler.com/shotmarker.html
Beat me to it, thanks gusmodelmaker!
@@gusmodelmaker Thanks