I did the permanent fix for it my blower motor turning off and on intermmitently on my 2003 Silverado. I bought an "add a circuit." I bought the 30 amp one. I pulled the 30 amp fuse out in the cab for the heater/AC hvac system and plugged in the add a circuit that has 2, 30 amp fuses in it with a pig tail coming out of it. I connected 8 ft of 14 gauge electrical wire to it with a butt connector. I ran the other end to the blower motor on the passenger side of the cab. I cut the pig tail off of the blower motor(the blower motor just has 2 wires coming out of it. A red and a black wire. I connected it to the red wire. The black wire on the blower motor I connected an eyelet to it and connected it to one of the glove box hinge screws which was a good ground. I cut the 8 ft piece of wire right above the transfer case shifter and installed a toggle switch from walmart. Now I can turn my blower motor off and on with that toggle switch. I only have high fan speed, but I don't care.
Great instructions! except for one thing... don't leave the blower cover on like he did. (I know he says you can remove but he opted to leave his on) I tried to it leave on like him and gave up after a while. The cover is only for screws that are easy to get to and then its MUCH easier to access after its removal.
I have a 2003 silverado basic 4.8 eng and there is a extra mounting bracket. Have you seen or heard of this and what might be the part number. Gone through two parts and neither fit.
I did the permanent fix for it my blower motor turning off and on intermmitently on my 2003 Silverado. I bought an "add a circuit." I bought the 30 amp one. I pulled the 30 amp fuse out in the cab for the heater/AC hvac system and plugged in the add a circuit that has 2, 30 amp fuses in it with a pig tail coming out of it. I connected 8 ft of 14 gauge electrical wire to it with a butt connector. I ran the other end to the blower motor on the passenger side of the cab. I cut the pig tail off of the blower motor(the blower motor just has 2 wires coming out of it. A red and a black wire. I connected it to the red wire. The black wire on the blower motor I connected an eyelet to it and connected it to one of the glove box hinge screws which was a good ground. I cut the 8 ft piece of wire right above the transfer case shifter and installed a toggle switch from walmart. Now I can turn my blower motor off and on with that toggle switch. I only have high fan speed, but I don't care.
Thank you homie this was a grand help i didnnt even know i had a problem brewing till my whole ac stopped completely and you came in clutch
Bars! Happy to help bro 😎 👍🏼
Thanks for helping me with my 2002, all the same except different part #.
I like the way that you laid out the procedure. I followed it easily. Thank you.
I still didn't hear three 🤔
Me neither
Same here
was going to use your link but its no good anymore
Good info. I'm going to be doing this to my 05 Silverado to
The one in the back is easy if you twist the fan and pull it down, no screws to get the fan out there's a tab on the left
I'm having a really hard time getting the back plug in. Any tips?
Please and thank you.
Frying in Louisiana
Thanks for your information on how to! Replace Blower Motor! Plus like your Cassette tape Player. To Vs Sirius XM Radio!
9/32 is the same as 7mm if I remember correctly so if people don't have a 9/32 you can use a 7mm
And 7/32 I'm pretty sure is the same as 6mm
works and saved a lot of time and money!
Great instructions! except for one thing... don't leave the blower cover on like he did. (I know he says you can remove but he opted to leave his on) I tried to it leave on like him and gave up after a while. The cover is only for screws that are easy to get to and then its MUCH easier to access after its removal.
I have a 2003 silverado basic 4.8 eng and there is a extra mounting bracket. Have you seen or heard of this and what might be the part number. Gone through two parts and neither fit.
I have the same problem. Did you figure it out?
What do u mean I know mine has rear vents and manual controls so I can't find my resistor but? Extra bracket where?
The link to the resistor does not work. But Excellent video..
Thanks for letting me know. I’ll try to find a new link.
Fixed😊👊🏼
Mine only doesn’t work on 5 i may try this
Thanks man I finally fixed it!
Thank you brother. Appreciate you.
Mine is nowhere near as easy to remove.I have a 2003 Silverado LS with a 5.3 and it doesn’t look like this.
Thank Señor.
Nice music
so where is the part number/??????????
I paid $32 for my 2008 Ford escape
That’s a 4.8
Background music is not necessary. Does not add value. It is an annoyance.
Music does not help.
Dealer just charged me 850$ for this fix…