You should create a section on your website for broken or bent parts, so that instead of parts being binned just sell them cheaper, cause bent handle bars is better then no handle bars
I love your business and the way u are helping more bikes than just that one at first I was like “that was a sick bike” (talking about the cr125) but you never put it back together but then I realized what you were doing and I have watched your vids ever since keep up the good work👍🏼 Ps. do some more riding videos when it’s dry please
Serpret yeah i know, my friend made it on my account and i sent it to him because he lost his phone and i was playing on his Xbox and he took my phone, im just saying that ur sense of humour is bad, and its not my problem if ur gay, i like girls
Cameron, for you and your readers. There's a company out in Oregon..Muzzy Weld (I think) that sells aluminum rods that work extremely well with a gas torch for any thing like fork tubes as well as frames. I had an older KTM that I bought used with a cracked axle slot on one of the tubes and still working!
Hay if your gonna try to weld the aluminum, clean it if it is not clean all ready, then bake it in the oven to get all the oil out of the small pores in the aluminum. I think argon welding would work well because it will majorly reduce the oxidation when welding two parts together.
Hey Man It would be cool to know how that piece was fixed or welded, I have successfully welded pieced on my Cr 125 with a 4043 series aluminum on a MIG Fronius, Am not sure what the factor uses it would be nice to know what other welders out there are doing on their bikes!
The best thing for cleaning off glue or anything heavy such as silicone is paint stripper. Providing the part you are cleaning won't get damaged by it.
Ever get anyone offering a bike that is too far away for you to go get? I'm thinking about getting a business like yours started in Minnesota so if you hear of a good deal let me know haha.
Love the vids cameron! Everything is so in depth and not to long of a drag on one subject like some UA-camrs! Been subscribed since the bbr crf 50! What kind of solvent do you use? Looks like it works pretty damn good!
any advice on starting a business to sustain myself? IIRC you sell motorcycle parts online. I do not have an interest in selling motorcycle parts, rather on refurbishing sofas, chairs, furniture and small goods. How did you get the client base and how did you grow?Just on the surface it seems difficult to get a supplier or source of the goods and know that you can get some good materials to refurbish and turn a profit. The even harder part is to make a site that people will go and trust. Appreciate any help! Not many people do this line of work though it is very lucrative.
I really need to get a set up like u have.. I wanna break my bike down so bad an clean it up & powder coat it... love the video as always.. Keep up the great work...
These videos soothe my OCDMX! Would like to get one of those enclosed power washers. Your videos are bringing me back to a past time I once wanted to forget and run away from. You tearing down Honda’s brings me back to days I’ve long forgot. Thank you
Emils Kalnins grips are cheap you can get some for 5 bucks its not worth his time to peel them carefully off and then post them and ship them. Its also not worth the buyers time trying to squeeze on used grips imho. Every bike i get i put a new bar pad and grips
last video i asked if i could buy the barkbusters. but why so damn expensive? i live in holland. here i cuild buy way nicer barkbusters for that price and than i even have them new. love the whole idea of the used products reselling thing, but i find it WAY to expensive!!
An idea for your give away prizes for overseas viewers. I know it costs too much to post overseas, so instead write the overseas winners name on the part and hang it on a winners wall in your workshop. Give it a quick shout out in your video or instagram a/c. It wouldn't cost anything and i'd be happy with something like that if i won. Just an idea from me, an overseas subscriber and regular viewer. Keep up the good work!👍
jeez, more work involved then you would expect, then you do the youtube thing too, props man people need to quit ragging on you lol, maybe you should hire a helper
Submit your entry over on Instagram instagram.com/cameronniemela/
Cameron Niemela do you make a living out of this?
You should create a section on your website for broken or bent parts, so that instead of parts being binned just sell them cheaper, cause bent handle bars is better then no handle bars
Was gunna say I could use them 😅
Cracked sub frame at 13:08 I love stripping bikes down to nothing, cleaning and reassembling, its like therapy!
I love your business and the way u are helping more bikes than just that one at first I was like “that was a sick bike” (talking about the cr125) but you never put it back together but then I realized what you were doing and I have watched your vids ever since
keep up the good work👍🏼
Ps.
do some more riding videos when it’s dry please
1:15
A cracked mudflap can sometimes happen from the p/o running a paddle tire.
oh a cracked frame just try de-greaser and if that dont work let in soak in solvent, should fix her right up
Serpret not funny at all
go back to your own channel and watch your sexy girl striptease playlist
Serpret yeah i know, my friend made it on my account and i sent it to him because he lost his phone and i was playing on his Xbox and he took my phone, im just saying that ur sense of humour is bad, and its not my problem if ur gay, i like girls
That what id say too LMAO
awwww someones embarrassed and deleted it
Cameron, for you and your readers. There's a company out in Oregon..Muzzy Weld (I think) that sells aluminum rods that work extremely well with a gas torch for any thing like fork tubes as well as frames. I had an older KTM that I bought used with a cracked axle slot on one of the tubes and still working!
Hay if your gonna try to weld the aluminum, clean it if it is not clean all ready, then bake it in the oven to get all the oil out of the small pores in the aluminum. I think argon welding would work well because it will majorly reduce the oxidation when welding two parts together.
Hey Man It would be cool to know how that piece was fixed or welded, I have successfully welded pieced on my Cr 125 with a 4043 series aluminum on a MIG Fronius, Am not sure what the factor uses it would be nice to know what other welders out there are doing on their bikes!
The best thing for cleaning off glue or anything heavy such as silicone is paint stripper. Providing the part you are cleaning won't get damaged by it.
Cameron what are some websites you use to find these bikes? I always look on craigslist but never see much
Actually a lot of the recent bikes have come from viewers on youtube.
Ever get anyone offering a bike that is too far away for you to go get? I'm thinking about getting a business like yours started in Minnesota so if you hear of a good deal let me know haha.
Love the vids cameron! Everything is so in depth and not to long of a drag on one subject like some UA-camrs! Been subscribed since the bbr crf 50! What kind of solvent do you use? Looks like it works pretty damn good!
Thanks man! It's a general cleaning solvent from a local chemical store.
You can't please everyone cam but I really enjoy the tear down and parts prep videos, keep em coming ☺
I love watching you clean bikes up and your content is great ! Keep it up !!
Hey Cameron, Do you heat your workshop all the time? Otherwise how do you keep your water pipes and pressure washer from freezing?
It's heated pretty much every day but it never gets below freezing regardless of the outside temp.
Great work Cameron as always cont wait for next vid always a good day when I get notification for new vid keep up the good work up
Why not use a small press to straighten the bars? Worth a try.
Sir, if I want to take the used frame of 125 2006 then how much will I get?
with oxidation allot parts weaken over time. not much can be done about that.
any advice on starting a business to sustain myself? IIRC you sell motorcycle parts online. I do not have an interest in selling motorcycle parts, rather on refurbishing sofas, chairs, furniture and small goods.
How did you get the client base and how did you grow?Just on the surface it seems difficult to get a supplier or source of the goods and know that you can get some good materials to refurbish and turn a profit. The even harder part is to make a site that people will go and trust.
Appreciate any help! Not many people do this line of work though it is very lucrative.
I really need to get a set up like u have.. I wanna break my bike down so bad an clean it up & powder coat it... love the video as always.. Keep up the great work...
how did u make that pressure washer cabnet devise???
These videos soothe my OCDMX! Would like to get one of those enclosed power washers. Your videos are bringing me back to a past time I once wanted to forget and run away from. You tearing down Honda’s brings me back to days I’ve long forgot. Thank you
can you help me bro i need a full frame for my ktm 450 how can i get it
Do you have a video on that pressure washer cabinet?
I do have some older videos that show the cabinet.
Cameron Niemela is it a converted sand blast cabinet or is it an actual pressure washer cabinet that you can buy?
Hello! I’d like if you dp a video when you ripping the new tryck with the ttr
Do*track*
Crack kills!!!
Where did you snag your pressure washer cabinet? Redline?
It was built by me
How repair Handlebar broken / Crooked ?
Will the handguards for the 03 crf450 fit the 04 crf450? If they do then I'm buying
It depends what bars you have. They'll only fit 7/8" aluminum bars
Cameron Niemela I want black rims on my 2005 cr125 but don't want to spend a fortune on new rims do you know how to do it for under $200?
You could powdercoat the stock rims
Ok Thank You. Sorry for all the questions.
Been waiting for the TTR when are u going to finish it
Still waiting on parts for it:)
Hey my bike has really low compression and is hard to start do you know what it could be? I have a 2008 crf450r so I could come here to buy the parts
I'd check your valve clearances first, then piston and rings.
Cameron Niemela Thanks man!
I need an airbox for a 99 cr250 do you have any and how do I get ahold of your parts
Revivemoto.com
You know it’s an old video when there’s not a scotch brite pad in sight
How is the store named?
Man you should put them back yours they would be the cleanest bikes ever
Straight screwdrivers no power drills now I have one see if it will work for me
where are you from with the frozen track?
WA state
I was fucking gutted my mother said what are you waiting for I said one of Cameron's videos couldn't wait
gpi radiators are bomb af
New subscriber here. I watched several of your videos and I personally think you are a very genuine guy. Hope all is well with you.
That track is so sweeeet
Can you send parts to Bulgaria?
Yes, I ship worldwide
Do you have front brake set for yz125?
I don't unfortunately
What is the solvent and de greaser you use
VinnyYZ I think he uses simple green. Its great stuff
I would run those bars. I just bought a pair from eBay more tweaked then those.
thumb this guys video's UP... its good for our community
love the vids ur channel and videos are so underrated...
Do you have a scrap pile... no trash. Its all metal. Recoup some cost.
When are you gonna finish the ttr
Still waiting on some parts:)
great video and awesome job with the bikes and track
What about the ttr
TTR is still waiting on parts:(
what is the website you list on ???
www.revivemoto.com
Really professional business
I wish I could win those handle bars but I do t have Instagram.
Weld it. No problem at all
حلووووو
my pit bike engine is hanging I think they have the worst frames they don't have a cradle bed
THE BEST❤
No dont throw away I want them
dude I love the videos I have done so much to my own bike with the help of your videos
Hey Cam, don't throw that beard away, you can use it to sand down oxidised parts!
I saw that subi back their and i like itt
I welded my frame
Why are you riding a cr 125 and not a crf 250?
Bc 2 strokes are better
claas wilters because he prefers it?
Because why the fuck not
Cause 4 strokes are gay.
McGrath is under contract from Kawasaki and Carmichael is under contract from Suzuki. That's why they ride 4 strokes.
make stickers and sell them on your site !
Can i have a free part :)
Seems like most of life's problems can be taken care of by just dipping em' in some solvent...
xD
Dude, why dont you fix the frame and build an cr500af. You'll never look back.
Don't cut grips on bikes give for free on site
Emils Kalnins grips are cheap you can get some for 5 bucks its not worth his time to peel them carefully off and then post them and ship them. Its also not worth the buyers time trying to squeeze on used grips imho. Every bike i get i put a new bar pad and grips
I just realize that but ko can give bars like this something sell on lover price
Have you ever thought about expanding your business to stree5 motorcycles also. Just seems like the obvious thing to do.
I just got a race car and I will put your business name on my car let me know if you want to
Yo Cameron,
You still readin comments?
Yup, I read every one!
last video i asked if i could buy the barkbusters.
but why so damn expensive?
i live in holland. here i cuild buy way nicer barkbusters for that price and than i even have them new.
love the whole idea of the used products reselling thing, but i find it WAY to expensive!!
joey_sybes holland💪💪
Now clean your sink.
Kevin Dye It's a shop sink!
Good job french please next vidéo
GROW THAT BEARD OUT CAM!!
I really just want to know who is buying used air filters lol they are like 10 bucks
owww, i really want to win a signed item.. But dont have instagram :(
I need a pair of bars lol
bars
Enjoyed the video!
Great video. Posted to your instagram. Need those bars. 😁
Great video!
Your last name sounds like your from finland
Yes, my grandparents are from Finland
@@CameronNiemela Guessed it!
What about the winner for the number plate?
Will be in the next video
Cameron Niemela
please send me some of your stickers
Suomi
Antsaboy vittu
Hell ye
An idea for your give away prizes for overseas viewers. I know it costs too much to post overseas, so instead write the overseas winners name on the part and hang it on a winners wall in your workshop. Give it a quick shout out in your video or instagram a/c. It wouldn't cost anything and i'd be happy with something like that if i won. Just an idea from me, an overseas subscriber and regular viewer. Keep up the good work!👍
Hey that's worth considering!
This bike has been riden by HULK !!! Lol !
Keep it up💪
jeez, more work involved then you would expect, then you do the youtube thing too, props man people need to quit ragging on you lol, maybe you should hire a helper
My idol
Vendeme una moto o que
Nice
When are you gonna give away something that isnt broken lol
Can u actually make money with buying bikes, taking them apart, and cleaning the parts and then selling them?
no shit
no u will lose arround 1$/ part
Samuel Sippola yes
Naa he does it for a laugh 🤔
Wow! 999 views in one hour!
Nek