Actually, you don't need an external router for ethernet operation. If you set the X Air's LAN settings to 'DHCP server' you can connect an iPad or MacBook directly via ethernet.
How exactly do you connect this way? I have an iPad lightning to ethernet adapter plugged in from my iPad to the ethernet port of my X18, what do I set my X air’s ethernet setting to? Static, DHCP or DHCPS?
Do you have to do that every time you use your external router, or just the first time you set it up? Like, if I go to a gig and I’ve already followed these steps before, am I still required to hook a hard wired computer up to it, or should I be connected automatically?
hi, I wonder one thing related ethernet cable signal, why is not green led lighting once I connected to ethernet cable ? Is it normal only yellow led ?
Hello! Can i use the xr18 as an expansion input and output for my x32 compact? i already have the x32 compact and i need more preamp's input and i was thinking that the xr18 would be a good choice since i can also use it by itself... Thanks in advance!
This is not possible Francisco because the X AIR Mixers are designed to be a standalone unit and is not able to be linked directly to your X32 Compact. However, we do have a number of products available like the S16, S32, SD8 and SD16 that give you the ability to expand upon the inputs/outputs of your X32. Be sure to check out our website for more details. Thanks!
Yes you will have to connect to your X AIR before you can properly setup and configure your Mixer to work with an external router. This can be done via direct hardwired ethernet cable or by connecting to the wireless internal Access Point network.
Absolutely! Using an external router with X AIR allows you to connect your tablet and PC wirelessly for control of your mixer at the same time, while connecting the USB port of your X AIR Mixer to your computer allows you to record audio directly to your favorite DAW software. (X18/XR18 Models only)
The range of the X AIR Mixer when using an external router will depend on the capabilities of your router and the devices you are using to connect to the mixer. (Tablet/Phone/PC) Dual band routers utilize the 2.4GHz and 5GHz bands, 2.4GHz will give you greater boosted range but is potentially more crowded with other devices on the same band, where the 5GHz band is much more open as far as traffic goes but the range is more limited than the 2.4GHz band.
Doesn't work for me. Did everything exactly like you did. When I switch to Ethernet; I lose connection and the connection page shows searching devices but nothing comes up. Where do I go from here???
+BigHamm007 This is likely because your control device is still connected to your "setup" network. After moving the remote switch over to ethernet you will have to tell your control device to connect to your external router's network to connect to X AIR.
Yes you can connect your PC to your X AIR directly via ethernet cable, just make sure that the REMOTE switch on the front of your X AIR is set to ETHERNET and that your computer is set to automatically accept an IP address via DHCP. If you need additional assistance then please contact our CARE department so that we can help you. You can reach us by phone at 702-800-8290 (US) or +44 1562 732290 (UK) or send us an email to CARE@music-group.com and one of our technical CARE specialists will be glad to assist you.
Because if you didn't save, you lose your settings and end up with whatever happens to be stored in the mixer (usually not the last setting you created on the PC).
please is there any way to connect the unit to my pc using wifi mode and still using the wifi internet?
Actually, you don't need an external router for ethernet operation. If you set the X Air's LAN settings to 'DHCP server' you can connect an iPad or MacBook directly via ethernet.
Emile van de Griendt this is what I needed to know. Is there a way of getting an Ethernet cable to the iPad?
How exactly do you connect this way? I have an iPad lightning to ethernet adapter plugged in from my iPad to the ethernet port of my X18, what do I set my X air’s ethernet setting to? Static, DHCP or DHCPS?
Do you have to do that every time you use your external router, or just the first time you set it up?
Like, if I go to a gig and I’ve already followed these steps before, am I still required to hook a hard wired computer up to it, or should I be connected automatically?
What position should I choose in order for me to connect my laptop through external wifi router ? Ethernet position or the middle position?
hi, I wonder one thing related ethernet cable signal, why is not green led lighting once I connected to ethernet cable ? Is it normal only yellow led ?
After you change it to DHCP will the internal router still work
Thanks this video Behringer, really helpful! But the routers ip setting is DHCP too or static? I see the mixer's lan setting DHCP mode
Hello! Can i use the xr18 as an expansion input and output for my x32 compact? i already have the x32 compact and i need more preamp's input and i was thinking that the xr18 would be a good choice since i can also use it by itself...
Thanks in advance!
This is not possible Francisco because the X AIR Mixers are designed to be a standalone unit and is not able to be linked directly to your X32 Compact. However, we do have a number of products available like the S16, S32, SD8 and SD16 that give you the ability to expand upon the inputs/outputs of your X32. Be sure to check out our website for more details. Thanks!
What speed is the ethernet port on these? 10/100, 10/100/1000?
Do you have to hook the computer to the router initially to get it set up to use it wirelessly?
Yes you will have to connect to your X AIR before you can properly setup and configure your Mixer to work with an external router. This can be done via direct hardwired ethernet cable or by connecting to the wireless internal Access Point network.
How come this system X Air 18 didn't come with a operations manual that stinks
Can i use router -> tablet.. and laptop connected with usb cable? in same time...
Absolutely! Using an external router with X AIR allows you to connect your tablet and PC wirelessly for control of your mixer at the same time, while connecting the USB port of your X AIR Mixer to your computer allows you to record audio directly to your favorite DAW software. (X18/XR18 Models only)
My iPad and iPhone lost wi-fi connection every 20 minutes. Why it happens? I’m using router and static addresses for devices.
Thanks for this helpful video. Would this potentially boost the range of the unit as well? Thanks!
The range of the X AIR Mixer when using an external router will depend on the capabilities of your router and the devices you are using to connect to the mixer. (Tablet/Phone/PC) Dual band routers utilize the 2.4GHz and 5GHz bands, 2.4GHz will give you greater boosted range but is potentially more crowded with other devices on the same band, where the 5GHz band is much more open as far as traffic goes but the range is more limited than the 2.4GHz band.
Doesn't work for me. Did everything exactly like you did. When I switch to Ethernet; I lose connection and the connection page shows searching devices but nothing comes up.
Where do I go from here???
+BigHamm007 This is likely because your control device is still connected to your "setup" network. After moving the remote switch over to ethernet you will have to tell your control device to connect to your external router's network to connect to X AIR.
My external router isn't even showing up.
I got an x18 but I can't connect to my optiplex 990... Someone help
witch external router can i use
I can't get any sound I clicked on something wrong I guess. Do not have any sound. I have powered Monitor speakers what can I do I have the air-18
Hi. Can i connect via cable ethernet the x air 12 direct to my Mac?. Without external router? Any link and set up how to do that?
Yes you can connect your PC to your X AIR directly via ethernet cable, just make sure that the REMOTE switch on the front of your X AIR is set to ETHERNET and that your computer is set to automatically accept an IP address via DHCP.
If you need additional assistance then please contact our CARE department so that we can help you. You can reach us by phone at 702-800-8290 (US) or +44 1562 732290 (UK) or send us an email to CARE@music-group.com and one of our technical CARE specialists will be glad to assist you.
what app do I use on my Mac laptop to run x air18?
J'aurais aimé avoir des sous-titres en français, je ne suis pas anglais, et je n'ai pas le temps d'apprendre
Why does everybody call a router "external router" ? There's no (internal) router in an XR.
como ago para conectar los monitores de piso ala consola digital
en los canales auxiliares
Sacalos de los buses
Anyone else cringe when he clicked "Console to PC?" I almost yelled at my screen, "NO NO NO CLICK THE OTHER ONE!!!"
Y tho?
Because if you didn't save, you lose your settings and end up with whatever happens to be stored in the mixer (usually not the last setting you created on the PC).