Complete Manufacturing of Hex Nut | Production Process of Hexagon Nut Bolt | Hex Nut Manufacturing
Вставка
- Опубліковано 23 сер 2024
- Thanks for Your support and Love.
Hex nuts are a six‑sided nut and are the most commonly shaped nut today. They are used with anchor shackles, bolts, screws, and other externally threaded components. Hex nuts, in conjunction with these other fasteners, are used to connect both metal and wood components to prevent tension and movement.
A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together.
Complete Manufacturing of Hex Nut | Production Process of Hexagon Nut Bolt | Hex Nut Manufacturing
Where vibration or rotation may work a nut loose, various locking mechanisms may be employed: lock washers, jam nuts, specialist adhesive thread-locking fluid such as Loctite, safety pins (split pins) or lock wire in conjunction with castellated nuts, nylon inserts (nyloc nut), or slightly oval-shaped threads.
Square nuts, as well as bolt heads, were the first shape made and used to be the most common largely because they were much easier to manufacture, especially by hand.
The most common shape today is hexagonal, for similar reasons as the bolt head: six sides give a good granularity of angles for a tool to approach from (good in tight spots), but more (and smaller) corners would be vulnerable to being rounded off. It takes only one sixth of a rotation to obtain the next side of the hexagon and grip is optimal. However, polygons with more than six sides do not give the requisite grip and polygons with fewer than six sides take more time to be given a complete rotation. Other specialized shapes exist for certain needs, such as wingnuts for finger adjustment and captive nuts (e.g. cage nuts) for inaccessible areas.
Hexagon full nuts are the most common nuts that are used with bolts, set screws and with any other fastener that has a machine thread. Orbital Fasteners offer hexagon full nut sizes ranging from M2 to M48 in grade 8.8 or 10.9 available in mild steel, bright zinc plated finish or in galvanized grade 8.
How to Draw a Hex Nut
Set your compass to a radius of at least two inches.
Position your compass' sharp point on any point on the circle's circumference.
Position your compass' sharp point at the intersection you just made.
Do Step 3 repeatedly to make a total of six arcs that intersect with the circle's circumference.
#manufacturinghexnut
#hexnutmanufacturing
#productionofhexnut
#PakistaniTrucks
This video takes us back 100 years.
I love how in almost every video they create more work for themselves by dumping everything on the ground...
Go
They get paid by the hour lmao
Those machines right there be looking like they been worked out for more than 100 years. No safety glasses, foam ear plugs, working gloves and working shoes and I don’t hear them complaining, mad respect for this gentleman.!!!
Thank You for visit
You don't want to return to 'the good old days' though? That was probably normal working conditions for many in Europe and America 100+ years ago
These workers don't have any other option to earn bread and factory owner knows that and concerned government org just don't care as their employee collect pay cheque right on time from the tax payers money.
yeah because they are being filmed and if they complain (which i assume they do in their heads) they will be immediately fired.
смотришь.и слезы наворачиваются.1 кг гаек у нас примерно 2 доллара стоит.сколько эти парни получают.сложно представить.а спец одежда вообще космос
Ничего, скоро мы их догоним. Спасибо нано...
у нас и таких производств нет, все из китая тащат.Закроет китай поставки и также поштучно будем на станке точить
@@user-nh3he9ds4e Я как раз токарь,если это произойдет,обращайся,бро
@@user-ef2vu2gw4n на токарном гайки такого размера очень невыгодно изготавливать, без штанов останешься))
@@user-nh3he9ds4e Китай давно выносит такие производства. Скорее всего они и изготавливают для Китая, а Китай везет к нам под видом своей продукции.
Главное не внешний вид, а качество. Китайские гайки очень красиво выглядят, но закручиваются один раз, потом слизывается резьба.
А в этом изделии несколько раз скаливается материал, как поведет себя резьба, остаётся только догадываться.
Это напоминает советские одноразовые шурупы, которые даже не закручивали в мебель, а забивали молотком.
А за находчивость конечно лайк, такие интересные станки. 🤔😁
Такое впечетление что этому видео лет 100.
Для начала сверлится отверстие, а потом вворачивается шуруп. А что до рукожопатых рукожопов ... то, это их печаль.
Забивали для скорости. У нас на заводе до сих пор в техпроцессах прописаны шурупы, и запасы их ебанистические. Сверлишь и закручиваешь, ничего страшного. Шуруп--не саморез. Привыкли. Хотя сейчас уже саморезы возят, понятно.
китайские гайки соответствуют своему классу прочности. если вы используете строительную гайку класса 5.8 для машиностроительных задач то никто не виноват кроме вас
@@user-nh3he9ds4e Всё зависит от требований заказчика. Китайцы на режущий инструмент лепят hss, а на самом деле сталь 45. То же самое и с автозапчастями.
Нанотехнологии, инновации, меня всегда эти парни удивляют.
thanks
Health & safety = 100%
But joking aside - these guys are awesome . It's just like going back in time - to the beginnings of the Industrial Revolution. Truly amazing stuff - to watch .
Thanks
@@wonderingskills1 l
Reminded me of the start of the industrial revolution too..
No safety really back then either..
@@dhanarajupithani6972 السلام عليكم
Раньше всё было надёжное и крепкое потому что всё делалось вручную . Даже в самую мелкую деталь была вложена частица человеческой души
Теперь души не в котле крутится будут;)
А в некоторые детали даже части пальцев рабочего могут оказаться вложены при неакуратности или недосыпе.
Amazes me how these guys work in environments of moving parts yet put on loose clothes. No safety shoes, no gloves and eye and ear protection! amazing
George Bush's Weapons of Mass Destruction....
Yeah you wouldn’t be so amazed if you ever went to their family reunions, 70% of them are missing limbs, 90% are missing digits., that’s why you see the same 5 guys in every factory, very few left in tact…
No just stupid the boss there doesn't care about the people in his employ.
And yet underpaid,
@@vicfracservandil5646 What is there pay rate?
Прямой поставщик Леруа Мерлен!!)
так же автоваз, камаз и все российские ларьки.
Señores, este video es un ejemplo de empeño, trabajo, voluntad, ingenio, ustedes son unos maestros en la fabricación, saludos desde Colombia
Thanks a lot
Pakistan candır! Azərbaycandan salamlar!
I am never going to throw a nut away after watching this. Even those that i have chiselled off! I'll clean them up and re-use them. That is a lot of hard work for something usually taken for granted!
I hope that you are not a mechanic by trade.
@@rtothep9140 Ha! Why? In the west, where i would be charging by the hour, cleaning up bolt heads is not cost effective. But over in the east, where things we take for granted are expensive, and man-hours are cheap, it's still economical. Do you watch 'Pakistani Truck'? Real mechanics with no special tools doing fantastic mechanicking, not 'fitters' like over here!
@@russtaylor2122
I still reclaim as long as there's no damage on thread.
In production regardless of primitive or ultra modern systems It still requires the same amount of energy and resources to produce a part. The only difference is you buy the machine or systems to cut down the time to do so.
@@conmanumber1 Absolutely! Couldn't agree more...
Crude old machinery, Extremely hard working men
And boys!
Раньше, в СССР были многочисленные заводы, фабрики. Где подобное было поставлено на поток. И как то не задумывались что может быть иначе,
Сейчас Россия. царек... и все кануло в прошлое. Ничего не производим. Ничего не выпускаем. Последние станки и конвейера пошли на металлолом. Одни лишь инновации и статистика на бумаге.
А вот тут... где то в странах третьего мира, что то делают. Как то поддерживается знание и опыт. Из омна и палок рождаются нужные вещи!
Молодцы! так держать!
Теперь, как только буду крутить гайки... буду вспоминать данных кудесников. :)
I am amazed by the industry and production in Pakistan. Maybe the machines are not advanced, but they made in Pakistani and their products compete with European products. Allah bless Pakistan. Long live Pakistan, Turkey and Malaysia.
Thanks a lot Dear
I add North Africa and Iran too 😉
Add india, tamilnadu bro
Qqqqqq
@@wonderingskills1 try try 9
Among other things, I love seeing the set up math on the wall, you guys are real machinists and a pleasure to watch. Thanks and be safe.
💞
Well done for not chopping any fingers off.👍
They don’t record that part😂
Countries like India and Pakistan have very high workplace accidents but nobody cares, workers are just replaced.
I know its a shame, Indians and Pakistanis are very hard workers👍
You are great in the conditions in which you work and produce quality work, thank you.
Welcome
@@wonderingskills1 aaaa
One by one.. That mans hands were rougher then a mile of back country roads! But he did it! hats off to him.
Great work! Simple buckets would make life easier tho
Yer not a lot of brain box going on
In this hell hole.
@@jimmywilson4322это
Buckets will be torn to pieces pretty soon.
Amazing what these people can do.great job,well done. Best wishes to you all,from,Auckland,New Zealand 🥇⭐⭐⭐⭐⭐👑👍👍👍👍👍💯❤🙂🙂🙂🍻
Thank You
It's amazing how clean the manager, the one in the blue, is with such a job
:D Great video .
Ter hes the fat controller the with
The cash .
I wonder how good the workman's comp is??
So much work...for a little nut, respect guys!!!!
Thanks
На ЗИЛе 40 лет назад всё было на более высоком уровне.
Но ЗИЛ рухнул, а ребята работают.
ZIL not working anymore. Factory is being demolished
@@lettoreentusiasta9374 уже снесли.
@@user-sj3iv5dh7v so bad. Sad
Wow I just wanna go over there and take gloves and eye protection and hearing protection and give it to those guys. What a great job with those crude tools they have
And a paycheck
Add some work shoes some have sandals on
Теперь я понял значение слова сыромятина)
Amazing, hard working people, great ingenuity. Deep respect, all best wishes!
Thanks
I see they heat treat the scrap ship steel before processing, nice touch!
Thank You
that actually annealing to soften the steel before it goes through the draw die
@@danneumann3274 Doesn’t appear hot enough, and my comment was sarcasm.
Dude, this is like traveling back in time to the 1930s.
90p
Вот она, прекрасна Россия будущего
I guess efficiency is not the name of the game, there it's training the young and keeping all the male family members gainfully employed?
Cool! As we loving! But... some more improvement - put a bucket under press - and minus one operation! (at 4:25) and put already existing colander under rotary mill - minus one more (at 5:37)! Time is money :)
But chamfer creating by double pressing/expanding - just perfect!
💝
Organization of work, housing conditions and machines, THIS IS THE MEDIEVAL AGES
3.6 million views & over 18,000 likes. (7/27/22) A bunch of us like to watch these videos. Nice.
Pooraa mehnat hai. Amazing.
I salute to the Pakistani people. They are industrious and hard working. Just be safe and be careful...
Thank You
Very old technology but like your video. Love from India
Thanks
Наконец то мои любимые гаечки, ка долго я их не видел.
Dobra robota. Nakrętki są potrzebne. Pozdrawiam z Polski.
*Ты сам предлогаешь орехи или тебе нужны орехи? и какие орехи? кедровые могу предложить если что🤗*
В польше гайки называют орехи?
Very hardworking guys by the way salute to them
Thank You
The weirdest thing is that they throw the nuts on the bottom and pick them up after every step 🤣 why not put them into a box directly. There is some ineffective work in this video but this amazes me the most.
you beat me to your comment i. e. I totally agree👍
They probably get paid by the hour. Lol
It's because they are hot and can't be picked by hands. Have some common sense
@@prateek54671 But they ARE picked by hands instead of let them falling into a metal Box directly. Just Place a box on the ground where the dirt is and the nuts will Fall into 😆
They need 50 persons. There is one persone for each action
That is the craziest thing I have ever seen...in so many ways.
The fact everything is so disorganized and filthy boggles the mind. I have worked at steel mills cleaner.
Very good job very nice step for performing the job very good skill worker thank you very much 👍👍👏
Thank You
Good afternoon to all from SE Louisiana 26 Feb 22.
💖
Good job sir 👍 my from indonesia🤝🇮🇩
Thanks
Most important, throw it always on the floor.
Yeah, that's just nuts.
😁
They spend a lot of unnecessary time picking them up.
Вот это я понимаю суровый токарный станок! Мне одному интересно если он нечаянно вельнет во время обточки как быстро его намотает на шампур?
где токарный то?
@@RobotN001 ну подобие товарного станка!
When they finally discover work benches and tables their minds will be blown. Surely the low cost of a couple of benches or desks will make their lives much more efficient and comfortable, but no, let's work in the dirt.
I pray these guys never get modern machinery and loose all of their skill sets , these men and woman are a lesson to us all .
Good morning congratulations super
Spare a moment to consider that all these elaborate machines were once gleaming new (and what they would have cost)
12 bucks
Yep, 100 years ago!
Same thing I was thinking. Seems most of this production would have been done in another country, back in the 70s and 80s. Possibly mexico or china. Maybe not Mexico. They had electrical infrastructure issues in the 80s
Most of those machines were probably from WW2 era.
A lot of these old machines came from Britain. We built them to last. My Colchester lathe was built in 1964 and still going strong. Much better than a Chinese import.
In fact old machines are getting hard to find now as so many have been exported to India and Pakistan. I bet a load of old US iron has gone there as well.
Excellent .Very hard working . Every process requires skillness . Very skilful workers .
Thanks
Какой труд👍
Какие гайки)))
This whole process drove me nuts
I wonder how many have died when their loose clothing gets caught in the flywheel of that punch press.
Thank you for your sharing ❤❤
When I saw the worker shifting the bolt heads I was like, yeahhhhh those bolts would already be too expensive to sell if made here 😅. Those workers really don't get paid enough 😭
Impressive. And they all seem to have all their fingers.
conditions very primitive machines primitive human security zero. 🤔🤔imagine the efficiency of these resourceful people in modern conditions with little training you can create little inventors 👍😎
Pakistani technique is Quality & Production both under least operating cost..!! 👍👍
Thanks
Enak melihat proses nya,walau masih manual,India memang jago buat mesin nya,hasil nya tidak kalah dengan mesin moderen
This is a Pakistani factory not Indian.
Very hard work,good I love this work,
Thanks
I am convinced the folks in Pakistan can fix or make anything, very impressive. Are the nuts hardened afterwards?
No
Crap in crap out manufacturing must really turn you on then. 😆
@@wonderingskills1 apparently they can't make very good nuts lmao
Sungguh kreatif sekali, sukses selalu teman 👍👍
Bravo Turkey İzmir selâm 👍🌹
💛
they should hang a bucket on the sheer so all the nut blanks can fall into it instead of the ground it would save some work also a V shaped shoot could be added to the tumbler to also make it dump into a bucket
Ils ne feront jamais. Ces paysans ouvriers sont traités comme des esclaves. Comme des prisonniers. Comme du bétails 🐂🐂🐄🐄🐑🐑🐐🐐
Le liquide l’argent💵💵💵. C’est pour le patron de cette usine d’esclavage.
Pour qu’il s’amuse bien de la vie 🍷🍷🍷👯♀️👯♀️👯♀️💋💋💋
Looks like buckets are only for water in Pakistan.
You should apply for a production manager job with this company!
That's nuts!!
Pakistan the best much love from Indonesia 🇮🇩
🤝🌺🌷🌹
Молодцы парни .......
На 2.01 на протяжном станке привод через КПП и мост трактора МТЗ.
Good 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼
💟
This video should be on "How it's Made". Holy sniky.
تسلم الأيادي ناس محترمين
woooow gud ameizing like indonesia 👍👍
thanks
Great coverage, fascinating to see, but my don't mess up co-ordination on the punch out presses.
💖
افرین خیلی عالیه خسته نباشید لا اقل یه دستکش برای کارگران بدین
I love watching them nervously approaching the machinery America threw out after the industrial revolution.
I LOV YOU FROM THE ARMENIA...👍👍👍👍👍 11/02/2022.MAYNEMIZ ANDRANIK👍👄❤💖👄
اعانكم الله
Indopakistani dobri ljudi majstori genijalci
බුදුසරණයි .....!
Salute your workers hard work
🤎
4:03 I think he hit the jackpot there 💰💰💸💸
Интересно, их часто на станки наматывает? Ходят в своих халатах да шароварах возле вращающихся шестерен - вообще пофиг, по несколько жизней что ль
ماشاء الله تبارك الله
Amazing processes to produce the final nut. This must be a very popular nut size!
❤️🔥
This work very hard,
Thanks
Need to use scrapless nut technology for greater efficency - cold upset bar into nut die and use counter punch to make hole and push bar back for next cold upset operation - 100% of bar used to make nut.
Лайк. Молодцы.
Последняя машина которая резьбу нарезает самая интересная. Поподробней о её работе хотелось бы узнать
Там везде старые британские теХнологии.
Предполагаю, что обычный гаечный метчик вращается, а на него заталкиваются гайки. Погуглите про гаечные метчики.
@@sergeypiletskiy1022 метчики с согнутым под 90 градусов хвостовиком?
Вообще загадочная машине))) как они потоком проходят сквозь крутящийся метчик и выходят с другой стороны?))) Наверно там какая-то система перехвата метчика.
@@skirmish3889 это всего лишь толкатель.Метчик вращается
Good job guys..
That’s nuts.
This is a great and very hard effort that gives you wellness
Thank You So Much
super work style
Thank You
Excellent video ! 👍
Thank You
@@wonderingskills1 You're welcome !
बहुत मेहनत करनी पड़ती है जी जय हो सभी मित्रों को कोटि कोटि प्रणाम
No worries, that guy PRO
That's nuts!
Why don’t you put a container under the machine to catch the peices ?
That would not justify all the workers they have there
how else would they get those beautiful pre rusted and somewhat used looking new nuts if they had that
If they where getting payed more than a bowl of rice and a.teaspoon of curry a day no one could afford the nuts extremely primitive process 🥱🥱🥱💯🇦🇺
@@jackbarrie6007 do not laughh at them.
@@saiansydyk5796 why not don't you like humor your a joke keep laughing it keeps you happy and younger 😅😅😅💯🇦🇺
Vcs trabalham sem equipamentos de segurança que Deus os protejam