i just bought the m600 but im learning now that you cannot complete the set up , as far as having the proper video feed . without a certain part , the srw 60g part, which is not available in NOrth america, makes no sense. So, if you planned on using the M600 with the Ronin MX, you cannot unless you have that part, which, on the DJI website says is not available in NOrth America, i may have spelled some of the part names wrong but message is accurate
and you are really sure you did not mixed up the Connections to CAN1 and CAN2 at 6:45? For me, the ronin is not conrolable using ur Setup - there are other DJI Tutorial which Show to connect the Ronin to other CAN Ports which make it work...
Thanks for participation in the discussion with valuable suggestion.?
I have been looking for the extension kit for the MX and how to balance the Red Scarlet X on it but can't find either. Can you Please help?
i just bought the m600 but im learning now that you cannot complete the set up , as far as having the proper video feed . without a certain part , the srw 60g part, which is not available in NOrth america, makes no sense. So, if you planned on using the M600 with the Ronin MX, you cannot unless you have that part, which, on the DJI website says is not available in NOrth America, i may have spelled some of the part names wrong but message is accurate
can you mount an RS3 pro on the m600?
Now that the Ronin MX is discontinued, will there be a replacement compatible with the M600?
Since the SRW-60G cannot be used in North America how is the camera hooked up to the M600? Is there an alternate setup?
Thanks for this. Very helpful. Do you have a video of the assembly of the M600 itself? M right be useful for others in future
Can I use my Nikon d5500 with the dji matrice 600 pro?
Can anyone confirm how sturdy the vibration dampening kit is? It kind of seems like just a few small screws in some plastic.
There is the name or model of Vibration Damping Kit?
Or prompt me analogues.
Tnx!
Does anyone know where to buy the vibration dampener mount?????
We lost ours :(
vibration damping kit is included with M600?
good question... have you an answer? :)
Are there any videos on doing this for the M600 Pro?
Oh, would it be different?
Day 2 ... Finally take some shots 😄👍🏻
NIC
Do I have to buy a separate vibration damping kit, or will be included with the matrice 600 or ronin MX? If I have to buy it where I can get it.
*Geth the DJI M600 now with 50% DISCOUNT from the DJI Store when ordering with this link:* click.dji.com/M9gs8Vy_n3rOGP0e?pm=link&as=0005
it is actually included in the Ronin mx
Does the M600 work with the Canon C200 camera?
Hi there, the Ronin-MX supports a wide variety of camera systems that weigh less than 4.5kg (10lbs). You may check and have a try.
wow that's a mission ....
and you are really sure you did not mixed up the Connections to CAN1 and CAN2 at 6:45? For me, the ronin is not conrolable using ur Setup - there are other DJI Tutorial which Show to connect the Ronin to other CAN Ports which make it work...
I'm having a similar issue. Did you ever get this resolved? I keep receiving a "gimbal disconnected" error...
yes, was mainli resolved with later fw-revisions fo ronin and m600 (incl. lb2)
you used the wrong screws on the camera base plate. I remember my first time playing with a video camera.
will the Ronin-M also work ?