You prolly dont give a shit but if you are bored like me during the covid times then you can watch all the new series on instaflixxer. I've been binge watching with my gf lately :)
You must know daddy really helped ! Or your doing something right you could buy a house with that kit and it’s total cost .Dint worry is sour grapes on my behalf I bought a second hand inspire 2 and separately bought a x5 s and was feeling smug until I saw all that kit !
M600 or Matrice or another brand other than DJI (I'm getting tired of the constant firmware and Geo fence limitations)? If money was not an issue, what is the best platform for all professional type jobs?
I do not really understand. When I buy the drone ...do I get a camera inside that big box? Or do I have to buy it later? If so, could you give us a link to that little camera that helps the platform fly longer? You mentioned it in the video
Hi, how can I contact you? I am currently developing a project and I need a little help to choose the best equipment for the objective I am looking for.
Do you know? Is the Max Flight Altitude above Sea Level really only 2500 m, as wrote on the DJI site? I must fly around the mountains and sometime the taking off point is at about 2200 m slm, or more, so this is limiting factor to me. The declared max flight altitude of Inspire 1, if I am not wrong, is twice more, 5000 m above see level.
I've been researching this myself. My understanding is that yes, they are, but you don't get RSS (remote start stop) unless you're willing to buy 3rd party hardware or hack up your own. Has me wondering if an inspire 2 with the micro 4/3 camera is a better choice. Not as good in low light as full frame, but... how much does it matter?
Hey Mike, Complete Matrice 600 stock package with aircraft, remote, chargers, 1 set of batteries - 38 lb. Matrice 600 (no gimbal, no batteries) - 20lb Set of 6 batteries - 9lbs. Custom Protector Case - 65 lb. Hope this is helpful!
How's the legitimacy if using the Matrice 600 and Ronin MX in North America? I am assuming you guys are US based, so how would you guys solve the video link issue between the drone and the gimbal?
Currently we run a video transmission cable directly from the Ronin MX to the M600 Lightbridge 2 system. This setup limits your ability to perform more than 360 degrees gimbal movements, however with the payload, stability and redundancy of the Matrice 600 it still remains one of the best aerial platforms on the market.
Again, another opinion, just based on the fact that you spend more money so you think your getting more. If you state to me you cant service this stuff yourself and dont know how to build them it then stands to exact reason that you cant make judgements about how "good" a system is because your just basing your opinion on the fact that its good enough for your purposes. You dont know if the parts are good - you dont know if any of it can be done better because you by definition dont know how to make them. Do you even know if there is no redunancy in cheaper systems. Dont scramble off to find out now. Im asking do you know. I do for the systems I built because i know whats under the hood. Hint hint.
Pony Vigil search on UA-cam. All depends on country or city you are in and their Acts. I have seen a few videos on UA-cam about them. There is also software App (billable) to download for training and beta test for exams.
I am sorry but you state in your video that the DJI focus will work with the X5 on the M600, this is a not right as the new controller has no CAN-bus port
This thing is awesome. It's crazy that you pay all that money and it doesn't come with the case. You want somewhere to put the product you purchased? Yeah you're going to have to pay for that.
Im at a loss regarding that 5D mark III. Who is actually flying one of these 5D gimbal setups and had some idea of how to control camera settings in flight. I'm flabbergasted by the lack of info; is everyone flying a 5D MarkIII all auto everything all the time ?! We have 5DSR at the office and its so f in g frustrating to fly with just the infrared trigger ... oh and you cant bracket shooting with the IR trigger. useless.
So, to do anything useful with this drone, you would want a budget of about $10,000 USD to cover drone, extra batteries, case, gimbal, camera, mounting adapters and any other needed accessories. Guess I won't be flying this anytime soon.
It cannot land efficiently like other DJI Drones. It might crash on obstacles. It's a very good attempt to carry Cinema Camera on Drones but still, it is a primitive model when other 4K light Camara Drones can do better than this with less risk and investment.
Well your paying for knowing someone else meddled with it. When I flew microlights I felt the same as you I want to know what im flying is good and safe which is why when it came to drones... building it myself was better than someone in China forgetting to screw it together well. China and Quality control arent two words that go well together... but if you trust THAT then good luck to you sir... ;-/
Grow up. Most of us don't want to make our own drones. I couldn't think of anything worse than working on this. I make a living out of my drone so I can make it pay in less than 2 weeks.
Matthew Williams It's not worth my time to build a goddamn drone. Most of us have "jobs". I just want the damn thing to work right so I can do my job. I'm not taking a month off just so I can say "Oh hurr durr, look at me! I built a drone!" In that time, all my clients will be gone. It'd be far more expensive for me to build a drone for a quarter the price than to just pay for a DJI one that works properly.
I'm interested in your comment. I'm a novice in this area and I'm curious what an alternative would be. I do agree that for what it is the price is very high but where does a person go then? Thanks.
Wow iba talaga ang galing NG pinoy kahit saang sulok NG Mundo saludo ako syu sir
Great confident and naturally knowledgeable presentation from this young man. Well done, fantastic.
Most informative video I have seen so far about the Matrice 600. Answered almost all of my questions! Thank you very much!
You prolly dont give a shit but if you are bored like me during the covid times then you can watch all the new series on instaflixxer. I've been binge watching with my gf lately :)
@Everett Santana yup, been using InstaFlixxer for years myself :)
Thank you, my friend! Wonderful and informative video about a tool that has begun to revolutionize film. Great job!
This is one hell of a coptor
Hi
is there any way to use vps and obstacle avoidance system on M600?
You must know daddy really helped ! Or your doing something right you could buy a house with that kit and it’s total cost .Dint worry is sour grapes on my behalf I bought a second hand inspire 2 and separately bought a x5 s and was feeling smug until I saw all that kit !
M600 or Matrice or another brand other than DJI (I'm getting tired of the constant firmware and Geo fence limitations)? If money was not an issue, what is the best platform for all professional type jobs?
I do not really understand. When I buy the drone ...do I get a camera inside that big box? Or do I have to buy it later? If so, could you give us a link to that little camera that helps the platform fly longer? You mentioned it in the video
Can you use this for land surveillance ?
You mentioned a DJI ground station control app. First I've heard of it. any updated news on that?
Hi, I can use Dronedploy with this drone?
it's compatible?
Thank you
Is the Mavic Pro HERE yet?
i need to modify the gimbal to mount an M16 as well as a firing system
Kim Jung, use your real name.
Hello, How To Factory Reset M600 Pro?
What is the effective operating radius?
Hi, how can I contact you?
I am currently developing a project and I need a little help to choose the best equipment for the objective I am looking for.
Hi very good presentation
The case seems to be very convenient, I hope a such part will be available in France ;-)
Do you know?
Is the Max Flight Altitude above Sea Level really only 2500 m, as wrote on the DJI site?
I must fly around the mountains and sometime the taking off point is at about 2200 m slm, or more, so this is limiting factor to me.
The declared max flight altitude of Inspire 1, if I am not wrong, is twice more, 5000 m above see level.
Hi there, do you know if you can use the GH5 with the M600 pro?
yes, I confirm
What size case do you need?
What is size different between
Dji matrice 600 or dji s1000
We're did you get it
Is this still a good platform or has it been eclipsed?
Can we use red wepon ?
very good!
Any chance they will make a gimbal for GH5?
Your link, here up, is broken.
I need metric 600 drone
Top speed?
Bro I can buy this at the dollar store right? Ya
Would any of these gimbals be compatible with a Nikon D810 or D850? Great video BTW.
I've been researching this myself. My understanding is that yes, they are, but you don't get RSS (remote start stop) unless you're willing to buy 3rd party hardware or hack up your own. Has me wondering if an inspire 2 with the micro 4/3 camera is a better choice. Not as good in low light as full frame, but... how much does it matter?
What is the total weight of this package with two sets of batteries?
Hey Mike,
Complete Matrice 600 stock package with aircraft, remote, chargers, 1 set of batteries - 38 lb.
Matrice 600 (no gimbal, no batteries) - 20lb
Set of 6 batteries - 9lbs.
Custom Protector Case - 65 lb.
Hope this is helpful!
Metric? Really? why dont you convert yourself? the fuq!
Tom
How's the legitimacy if using the Matrice 600 and Ronin MX in North America? I am assuming you guys are US based, so how would you guys solve the video link issue between the drone and the gimbal?
Currently we run a video transmission cable directly from the Ronin MX to the M600 Lightbridge 2 system. This setup limits your ability to perform more than 360 degrees gimbal movements, however with the payload, stability and redundancy of the Matrice 600 it still remains one of the best aerial platforms on the market.
And when it crashes one of the most expensive to fix. Kerching....
Again, another opinion, just based on the fact that you spend more money so you think your getting more. If you state to me you cant service this stuff yourself and dont know how to build them it then stands to exact reason that you cant make judgements about how "good" a system is because your just basing your opinion on the fact that its good enough for your purposes. You dont know if the parts are good - you dont know if any of it can be done better because you by definition dont know how to make them. Do you even know if there is no redunancy in cheaper systems. Dont scramble off to find out now. Im asking do you know. I do for the systems I built because i know whats under the hood. Hint hint.
I have lost 3 quads because of the loss of one prop. What will happen if a prop fails with the M600?
The M600 will continue to fly with the loss of 1 prop /motor/arm. This is for fail safe only though and not intended for continued flight.
How long does it take to get a pilot license
Pony Vigil search on UA-cam. All depends on country or city you are in and their Acts. I have seen a few videos on UA-cam about them. There is also software App (billable) to download for training and beta test for exams.
What He Said On 2:50 ? And What Is The Meaning ? Please Explain Somebody , And Photo/Video Qulity Is Better Then Inspire 1 And 2 ?
Snigdha Chakraborty I think he is saying that that you can guy specific gimbles for specific cameras and lenses
I am sorry but you state in your video that the DJI focus will work with the X5 on the M600, this is a not right as the new controller has no CAN-bus port
This thing is awesome. It's crazy that you pay all that money and it doesn't come with the case. You want somewhere to put the product you purchased? Yeah you're going to have to pay for that.
Im at a loss regarding that 5D mark III. Who is actually flying one of these 5D gimbal setups and had some idea of how to control camera settings in flight. I'm flabbergasted by the lack of info; is everyone flying a 5D MarkIII all auto everything all the time ?! We have 5DSR at the office and its so f in g frustrating to fly with just the infrared trigger ... oh and you cant bracket shooting with the IR trigger. useless.
Why wouldn't I just buy this direct from DJI? I don't get it...
I crashed my Matrice ,anybody knows where to buy extra part???
Lina Chua internet
More like what you need to know before dreaming about buying the m600
The matrice 600 resembles an alaskan king crab
It does! lol
Won't be as tasty either! LOL!!
Is this better than my dji spark?
The thing I have to know before buying this baby is the money in my pocket.
I want a m600 I have a I2 I can’t justify buying a m600
I could build it myself
Pretty funny that my DJI Karma can do everything this can do at half the price.
So, to do anything useful with this drone, you would want a budget of about $10,000 USD to cover drone, extra batteries, case, gimbal, camera, mounting adapters and any other needed accessories. Guess I won't be flying this anytime soon.
It cannot land efficiently like other DJI Drones. It might crash on obstacles. It's a very good attempt to carry Cinema Camera on Drones but still, it is a primitive model when other 4K light Camara Drones can do better than this with less risk and investment.
piggy says, "Pixhawk 2" on a diy rig ----- save you many thousands.....
6:32 ...Well I've got 3 PS3's!
6:22 He has 2!
6 batteries and still 30 minute flight time *sigh*
Ill stick to the Mavic!
This shit is going towards "can I get a fitting for Uzi?"
You showed a case to keep batteries, So why not have away to charge them also in the case
10:16 ...
Buddy you didn't build it, DJI did!
Did something passed flying by at minute 4:20? 🤔 .....must have been an insect...
Why I'm even watching this . . .
الشرح بطريقه سريعه جدآ والترجمه بالغه العربيه سريعه لايستطيع المتعلم يستفيد
Lol. I wish I could afford this.
You could build someothing like this for a quarter of the price. DJI stuff is a ripoff.
Matthew Williams IDK if I want to trust something I've built with flying $5,000 in camera gear a few hundred feet above the ground.
Well your paying for knowing someone else meddled with it. When I flew microlights I felt the same as you I want to know what im flying is good and safe which is why when it came to drones... building it myself was better than someone in China forgetting to screw it together well. China and Quality control arent two words that go well together... but if you trust THAT then good luck to you sir... ;-/
Grow up. Most of us don't want to make our own drones. I couldn't think of anything worse than working on this. I make a living out of my drone so I can make it pay in less than 2 weeks.
Matthew Williams It's not worth my time to build a goddamn drone. Most of us have "jobs". I just want the damn thing to work right so I can do my job. I'm not taking a month off just so I can say "Oh hurr durr, look at me! I built a drone!" In that time, all my clients will be gone.
It'd be far more expensive for me to build a drone for a quarter the price than to just pay for a DJI one that works properly.
sounds like he just hit puberty lol
The price is relatively stupid for normal people
Ali Baba because it's not for normal people...
all that gear and no videolight
These drones are beginning to be serious shit!
Just need a small loan of a million dollars
Cheap over priced junk!
I'm interested in your comment. I'm a novice in this area and I'm curious what an alternative would be. I do agree that for what it is the price is very high but where does a person go then? Thanks.