Just take the whole brake caliper bracket off and you don’t have to remove the pads or anything, as long as you don’t press the brake pedal they will go back on easily
Did you struggle any on the passenger side doing the same thing on my truck we have the same exact truck I'm doing 3 inch coil spacers and 3 inch spindles. my passenger side has to much pressure on it when I bolted my spindle on and let the lower control arm down it broke my brand new moog ball joint on the upper control arm. Had to compresse the spring down in the Truck to even get the spindle to bolt up when I did and let the jack down it broke the brand new ball joint completely. Any idea or tips would be a blessing
@@AUSTINFRILOUXlol I’m going to have to agree with him. You’ll only need a jack stand once in your life. So you better have it when you do, or you’ll never need it again.
The guy at rough country lift kit told me I couldn’t put the spindle lift kit on my truck like yours i’ve just had it sitting in my closet in a month ago put it on :)
hey man i have the same truck and i wanna do the same spindle lift but i heard you have to have wheels bigger than 16 inches is that tru cuz rn im just runnin stock 16 inchers
Doing this soon currently stock in the front and 2 inch drop in the back with 0 blocks am gonna be lifting the front with the spindles and putting stock leaf shackles back on and gonna beef up the leafs but still run no blocks my question to u tho is are u running blocks currently
Do you run spacers in the back? Since the front pop out more. I do want to avoid spacers. Unless I can run a wider tire in the back only to match the front. 😅
@@Henry-wo7hw I’m not sure I may have to get some aftermarket upper control arms Bc I can’t adjust them enough to get my camber/caster right. Top of my wheels sticking out farther than the bottom
@@AUSTINFRILOUX This is the thing that I was worried about. Keep us updated, i'm following. I've got an 06 sierra crew cab 2wd i'm fixing to put 3" spindles on.
Could you help me maybe? I have 3 inch spacers and 3 inch spindles and my tires are cambered really bad… and mechanic shops says they can’t align it Bc the control arms are hitting the frame when they do and it’s too high
Did it push your front wheels out? I was wondering if you was going to need spacers to make the rear even with the front I’ve heard it pushes the front wheels out but wasn’t sure
@@williamclark3674 i lifted my 98 c1500 4inch lift spindles and it pushed my front tires out almost 2 inches so I got 2 inch hub centric borla spacers on the back my kit is rough country
What year, make, and model is your truck? Im trying to install lift spindles on my 2wd truck, but im having problems with the tie rods, they are too short, maybe I can buy your year tie rods because they look longer and that’s what I need.
I’m doing the 3in spindles on my 04 Cateye but the front shocks aren’t long enough what was done by you to make them work ?
Thanks
Jack Stands Bro!
Just take the whole brake caliper bracket off and you don’t have to remove the pads or anything, as long as you don’t press the brake pedal they will go back on easily
@austin
good work man... doing this on my sons ram 1500 3'' spindles
Thanks
never seen suspension parts come off so easily 😂 clearly this was taken apart beforehand, if it wasn't you need to bolt check that truck
I’m about to get a 4.5 inch lift so that’s a 3 inch spindle
Right on Brother
Did you have to put longer front shocks?
Usually for 3 inch and down the spindle is same size physically just moves the hub location down on the spindle itself so no other parts.
Nice video, just need to get a close up shot of each piece you need to remove so people who are new to doing this can know what. They are removing
I gotcha
Where’d you order your drl ?
Did you struggle any on the passenger side doing the same thing on my truck we have the same exact truck I'm doing 3 inch coil spacers and 3 inch spindles. my passenger side has to much pressure on it when I bolted my spindle on and let the lower control arm down it broke my brand new moog ball joint on the upper control arm. Had to compresse the spring down in the Truck to even get the spindle to bolt up when I did and let the jack down it broke the brand new ball joint completely. Any idea or tips would be a blessing
Put a jack stand next time
I’ve never used any before lol but I’ll keep that in consideration!
@@AUSTINFRILOUXlol I’m going to have to agree with him. You’ll only need a jack stand once in your life. So you better have it when you do, or you’ll never need it again.
The guy at rough country lift kit told me I couldn’t put the spindle lift kit on my truck like yours i’ve just had it sitting in my closet in a month ago put it on :)
Why he said you couldn’t put it on? Lol
is it 2wd, and do u have cast steel uppers?
Did you need longer brake lines?
No I didn’t
now for some lift springs
maybe so
Were you running the spindles and coil spring spacer ??
hey man i have the same truck and i wanna do the same spindle lift but i heard you have to have wheels bigger than 16 inches is that tru cuz rn im just runnin stock 16 inchers
never heard that before
@@AUSTINFRILOUX I know you do for lowering spindles, not sure about lift spindles
@@AUSTINFRILOUX did u have to reroute brake lines
Doing this soon currently stock in the front and 2 inch drop in the back with 0 blocks am gonna be lifting the front with the spindles and putting stock leaf shackles back on and gonna beef up the leafs but still run no blocks my question to u tho is are u running blocks currently
No blocks in mine
@@AUSTINFRILOUX how many leafs do u have
@@AUSTINFRILOUX cuz currently I have just 2 and I’m gonna upgrade to 4
Dont no much but did you just add spindles on it w stop components like springs shocks tie rods and control arms? Lmk please
Yes all stock components besides shocks
Do you run spacers in the back? Since the front pop out more. I do want to avoid spacers. Unless I can run a wider tire in the back only to match the front. 😅
Will be doing this on my silverado, did you change springs? Or shocks?
Ended up putting some rough country shocks for a better ride
I got 3 inch spindles and 3 inch keys on my Tahoe throw u some bigger keys on there to bro it’ll sit
It doesn’t have torsion bars
What the purpose for lifted spindles want to maybe put it on a tahoe 07 4wd wit 3.5 struts or do I need them or naw?
So my question was did you need to change the shocks and Springs but I guess not
How are your ball joints?
They definitely need to be replaced but have been holding up fine
@@AUSTINFRILOUX any idea which ones you’re going with? I’m looking at the 2 deg adjustable by moog for my spindles.
@@Henry-wo7hw I’m not sure I may have to get some aftermarket upper control arms Bc I can’t adjust them enough to get my camber/caster right. Top of my wheels sticking out farther than the bottom
@@AUSTINFRILOUX This is the thing that I was worried about. Keep us updated, i'm following. I've got an 06 sierra crew cab 2wd i'm fixing to put 3" spindles on.
Is the only thing you changed is the spindle it’s self on Both sides, and that’s it ?
I have 3” coil spring spacers as well
Could you help me maybe? I have 3 inch spacers and 3 inch spindles and my tires are cambered really bad… and mechanic shops says they can’t align it Bc the control arms are hitting the frame when they do and it’s too high
Get lifted uca
Did you have to get a alignment and if so did it fix the tire from wearing on the outside
its called a knuckle
Same thing
don’t be coming at me or nun i’m 14, but you can’t run em on a 4wd can you?
You can but you’ll have to take out the CV axels out & replace the hub bearings to 2wd ones
This guy thinking it's cool to chew
@@Edgar_Acosta nah it’s a bad habit
Can I do this with stock keys ?
How is it sitting so high I have 3 inch spindles and mine sits level
I have coil spring spacers as well
what brand coil spacer did you buy
a cool thing a learned to prevent the hub from falling off is to leave the nut on the bolt to catch it so it doesn't fall on you.
What tire size are those? What tires are you planning on buying?
What shocks are you using??
Rough country
Had me at packing the dip. Required equipment for vehicle work. You gotta lift the back. Squat life applies to the gym, not trucks 🤣
Did it push your front wheels out? I was wondering if you was going to need spacers to make the rear even with the front I’ve heard it pushes the front wheels out but wasn’t sure
Yes it does
@@AUSTINFRILOUX what size spacers should I get?
@@williamclark3674 i lifted my 98 c1500 4inch lift spindles and it pushed my front tires out almost 2 inches so I got 2 inch hub centric borla spacers on the back my kit is rough country
What you got in the back ?
Ain’t nothing in the back
What brand is that
Idk some eBay spindles
Subbed to see more nephson bs
What year, make, and model is your truck? Im trying to install lift spindles on my 2wd truck, but im having problems with the tie rods, they are too short, maybe I can buy your year tie rods because they look longer and that’s what I need.
Mine is a 2005 Chevy Silverado
@@AUSTINFRILOUX 1500? And where did you get your tie rods because I need some long ones like the one you have on your truck?
@@michaelpena7584 yes 1500 and I got the duralast gold from autozone
@@AUSTINFRILOUX is it the part# GES3492, for the outer tie rod? And was it the same length as your oem outer tie rod?
Wow so cool with chewing tobacco
Yep
What front shocks are you running?
Rough country shocks
@@AUSTINFRILOUX what length? I’m in the process of doing the same thing
@@emmanueltamez2965 Rough Country 2.5-4" N3 Front Shocks for Chevy/GMC 1500/Classic 2WD - 23238_A
Where did you Buy this spindles?
Cheap eBay spindles
Yo I’m thinking about doing this can you message me
Yessir