Nissan Versa Key Fob Programming

Поділитися
Вставка
  • Опубліковано 20 лип 2024
  • In this video, I show the super simple way to program the key fob and not the transponder key to my 2008 Nissan Versa. Don't forget to hit the like button, leave a comment and subscribe as well as check out my channel content too. This would work on other Nissan vehicles, I don't know which but I tried it with my 2010 rouge and I'm able to lock both cars at night now as one fob is programmed to both cars. This steps to doing this is very easy to to, make sure the replacement key is compatible before to save the headache.Programming steps first thing to do is to is close the driver door and lock the vehicle, then insert and remove the key in the ignition 5-10 times within 10 seconds (depending on Nissan model) until hazard lights blink. Once the hazard lights blink, insert the key and turn the car on but do not start engine (KOEO). Now hit the lock button on the new remote fob and the hazard lights should blink. Then turn the key off and remove it from the ignition and open the door to exit programming mode. If it is done correctly, the should have learned the new remote and is able to lock and unlock the vehicle.
    Video Overview
    Intro (0:00)
    Verifying Key Fob is Compatible (0:21)
    Opening The Fob Ensuring Chip Is Inside (1:24)
    Programming the New Key Fob To Car (1:54)
    Credits (3:04)
  • Авто та транспорт

КОМЕНТАРІ • 22

  • @robertziomekiii2877
    @robertziomekiii2877 Рік тому +1

    Thank you, man. This video helped save me some cash. My wife is happy. Watching your video worked for me. Simple and easy to follow. I found your video after watching some other guys youtube video that failed. Your instrucrions worked for me. Thanks again.

  • @AmritPalSingh-wz1hm
    @AmritPalSingh-wz1hm 2 роки тому +1

    Thank you. I was almost going to buy new one as my old fob stopped working. I saw your video and tried with old fob and voila!! Working again like new. Looks like it lost programming before. Thanks a lot

  • @Brown-St-Shop
    @Brown-St-Shop 2 роки тому +1

    Thanks it work perfect on the first try on my 2010 Nissan versa SL hatchback

  • @methuselahbenyah6745
    @methuselahbenyah6745 2 роки тому +2

    Works perfectly thanks!! 😊

  • @ProgressiveTruthSeekers
    @ProgressiveTruthSeekers Рік тому +1

    Nissan Versa Note, 2015. The car key programming won't work for the OPEN DOOR button on the key. The CLOSE DOOR button does program. What can be done about this?

  • @joseesquerdo5190
    @joseesquerdo5190 3 роки тому +1

    Thanks Bro very useful 👊🏼👍🏼

  • @grzesiek89231
    @grzesiek89231 3 роки тому +1

    Thanks buddy easy way to show how to do it’s work on versa 2009

  • @Complexanxiety
    @Complexanxiety Рік тому

    Not all heros wear capes

  • @craigslistseller9354
    @craigslistseller9354 3 роки тому +1

    THANKS Alex!!!

  • @jadecat18
    @jadecat18 Рік тому

    Thank you, this was really helpful! 2:07

  • @ringchaser4488
    @ringchaser4488 3 роки тому

    Hey, great video! What if I only need to program the new transponder key only? I have only one remote but it is already programmed. I have 1-new key, 1-programmed key, and 1-programmed remote. What do I do differently? Thanks!!

  • @VegasNevada
    @VegasNevada 2 роки тому +1

    Will this work for my CWTWBU729 20211 Nissan Versa?

  • @FallenSecrecy
    @FallenSecrecy 5 місяців тому

    Mine doesnt work its a versa hatchback 2012 i put the key 30 times and nothing no hazards lights

  • @jamescc2010
    @jamescc2010 2 роки тому

    Did you also to add a new key and program it?

  • @narainrithsa-ardwong1642
    @narainrithsa-ardwong1642 Рік тому

    I'm try my car but when insert and remove 5 times hazard light not blink (but door is unlock) and then process complete it not work.

  • @maryokonkwo8927
    @maryokonkwo8927 3 роки тому

    Hey should this work if I lost my original key fob and just buy a replacement?

    • @Alexa_Spencer
      @Alexa_Spencer  3 роки тому +1

      I don’t see why not, I didn’t use the old fob at all when programming the new fob just as a display to show that the new fob resembled the old one. Mind you It may be different on your car though. I only paid 7 dollars for the fob with the internals so I thought like many other things “let’s have a go” so I did and it worked. Depending on your car and where you get the fob will differ the results. If the cost is low enough, I don’t see the harm in trying it. Hope that brought a bit of help.

    • @maryokonkwo8927
      @maryokonkwo8927 3 роки тому +2

      @@Alexa_Spencer Thanks - I went ahead and tried it and it worked!

  • @lizzbierman5090
    @lizzbierman5090 3 роки тому +1

    I have a 2011 Vera and I’m trying to program the replacement fob, but When I put my key in the ignition it unlocks all the doors, and then the red car with key light starts blinking on the dash as I’m putting the key in and out.
    Any suggestions

    • @barnesalexander7
      @barnesalexander7 2 роки тому

      Hey, I have the same problem. Did you ever figure it out?

  • @abdulrehmanmalik486
    @abdulrehmanmalik486 3 роки тому

    my car just unlocks it self after 5 times