When I was looking at the stock and thinking about quickly loading shells…. Just imagine a speedloader for this. Personally the animation that happens when reloading some jakobs rifles in borderlands 3 comes to mind
The Buzz Bee Rapid Fire Tek is probably the blaster Coop is referring to at 5:15. Lever action shell ejecting, but uses a box mag instead of a tube mag.
Nerf also has had a number of Level action blasters over the years. Including both shell and non shell based ones. Including the beloved Slingfire that was well before I got into the hobby.
when i was 9, i got my first nerf blaster, it was a slingfire, and i got it, because i wanted to be like the scout from tf2. this brings back some good memories, thanks for the nostalgia, frank
Hey Frank, loving the content, I think you should remake the heavy gunner showdown video as it was really fun the first time but now there are so many more options like af v twin, prometheus with and without hopper extensions, jupiter with proton pack, or even a perses with the OOD hopper.
@Miguel Rodriguez I definitely don't think it is a comedy loadout video, it is basically reviewing lots of blasters that are similar to inform consumers which is the best for different needs
To be fair lever action rifles in real life are pretty temperamental too, only reason they are semi relevant are because of specialty cartridges a la 45-70 govt. Also wouldn't 3D printed plastic smoothen out over time?
Theoretically yes. But where does the extra bits that broke off to make it smooth go. Hopefully out, but it also may cause extra problems staying in and scratching everything further.
@@benhingley9523 true, the plastic particles that get scraped off often stay inside the blaster, but that's part of what you should expect from any blaster. It's good practice to open up a blaster from time to time and clean up/relube its internals in order to get rid of these particles collecting in the grease that coat the whole mechanism. Good maintenance keeps a blaster healthy ! :)
you don't own many lever actions do you? the entire henry corporation is built on reliable, affordable lever actions and they've had huge success and no complaints. marlin built their name mostly on levers, including the caliber you mentioned. even with them gone now, ruger bought the rights to keep making the lever actions. by all logic they're more reliable than any semi-automatic gun, and easier to use and quicker to load than pump actions. as far as plastic goes, i dont know id never buy adult nerf guns now that i know they're 200 dollars
I would like to mention that in a super stock war where you could still have an fps advantage with a Wingchester and a sniper scout role could be where this shines.
Every time I'm watching a review of a lever action blaster, I wish so much you could do the one-hand load. It would be so cool! Also, I love shell ejecting blasters. Wish you all the best!
A little pointer a lot of us lever gun users do in person, get some paracord and wrap it around the lever loop. It'll help so you don't beat up your knuckles cycling the rifle.
I liked the Tactical Preview section at the beginning, very nice! It might also be fun to include some of your "hardcore parkour" testing procedure? 😂 Thanks for the great review! 🧡
Years ago, I used to have a lever action blaster. It was like this blaster, but was magazine fed. Despite having to hunt down shells after running around the house with it, I was definitely in love with shell ejecting Nerf guns.
I like this new highlight reel at the start! Hopefully you keep doing it, especially for things without an unboxing. Suggestion for a review: the Skewer by Taffy.
I can see this being used casually as a sort of “power weapon” thats preplaced before the start of the war ala battlefield if everyone’s starting with ~70 FPS blasters
i am 16 now, i remember being very into nerf guns 5, 6 yrs ago, damn brings back memories, coop772 looks a lot different now, thanks for making my childhood fun
Whats this? A high quality in depth third parry nerf blaster review with a funny and handsome host with years of content available to watch afterwards by golly I must subscribe
I haven't played with Nerf in years, but I still love coming to watch every time Coop uploads. Also noticed you changed the channel image. That picture of you totally screams "dudebro."
man frank starting to look better again,losing weight etc. im happy to see it since i watch his stuff since ages and really love him even tho idc abt nerf since ages anymore
2:47 as someone who has used an actual lever action I can confirm that's how you do it also you can't keep your fingers on the trigger because that can get caught when you pull it back
Idk what you're talking about you usually keep your three fingers inside and keep your trigger finger just forward out of the way. Never seen someone actually take their entire hand out to cycle it unless it got jammed for some reason
I just bought two of those. one for modding, and the other is for normal use and for my gun rack. for the modding one I replaced the spring with a weaker one to where its spring isn't as hard to prime. I also spray painted the outside. I also 3-D printed my own parts and replaced some of the parts so the gun has a bigger shell hold
Coop's complaints about the grip are also assuming that you're running without gloves. I'd be wearing a pair of fingerless bicycle gloves if I were to go to a game with this blaster. That's my opinion, but having those gloves to pad my hands against the rougher parts of the blaster and prevent sweaty hands from letting my grasp on the blaster slip, and I'd go fingerless so my fingertips would still be exposed to do more dextrous tasks like pulling the trigger or loading shells into the blaster.
Its so funny looking that operating the lever action pulls the whole trigger off with it, but then puts it back in place and is still able to fire the blaster
I'd buy this if it wasn't 3D printed. I get they need to for cost reasons but if I'm dropping over 200 bucks on a blaster I want it to be smooth and reliable
@@hallepeek6465 I did end up getting one and while it feels solid it's definitely still fairly rough and some of my shells don't work properly due to them being a little off. Overall very happy but I basically have the exact issues I was expecting, I also have similar problems with the Spring Thunder, but again it's still pretty awesome despite the minor flaws
Be nice if the lever bow was either straight or convex, instead of concave. Would be more comfortable to prime in the typical fashion, plus a wrap or gloves would help further.
For those unaware on what im talking about, Shellington aka Remington and Wingchester aka Winchester. The bottom of a bullet casing aka brass or shell is called the rem so you can already see what they did there and I dont need to explain the Wing one, Pure genious
Hey frank just wanted to say I love ur new profile pic! And I’m glad to see that you are content with yourself and that your health is doing good physically and emotionally
Ik it’s a performance issue but having jams is cool especially because there are different types of jams that usual nerf guns, Ik it’s a nusence but having the occasional failure to feed, failure to eject, ect is cool
![[REVIEW] Model 1887 Lever Action Shotgun | FOAM BLASTER](http://i.ytimg.com/vi/xOM6m6qK5sQ/mqdefault.jpg)
![[REVIEW] Chinese Foam Flinging Shotgun w/ Shell Ejection | GARBAGE!](/img/n.gif)
There's no doubt about it, shell ejection blasters are always fun to use and to watch.
Loading the shells isn’t
@@Galaxite__ seems more fun than magazines
@@Galaxite__ sometimes it’s cool :/
@@asiandieno4905 its not rlly practical for an actual nerf war bc you have to load darts back into the shells all the time
@@Galaxite__ I said it was cool, but I agree for practical purposes it wouldn’t be very good.
When I was looking at the stock and thinking about quickly loading shells…. Just imagine a speedloader for this.
Personally the animation that happens when reloading some jakobs rifles in borderlands 3 comes to mind
Well, there were speedloaders for lever actions.
@@akreid4614 and that is exactly what they looked like.
@@andreasottohansen7338 haven’t played borderlands, so can’t say. I just know the speed loader from winnie swift in hunt showdown)
Hey, I've owned a Wingchester since last May (Beta production run) and I'm actually looking to reprint and paint it to look like a Jakobs rifle lol.
Hell yeah
Ehy coop there is also this "soft bullet terminator winchester" which is currently on sale, could you please review it?
The UDL one?
@UC7OsHxDpLdF1wUY_VmZOkKA yiyi toy store is a scam
Spoilers. Its terrible
But looks cool
@@richardmetellus2336 i have it, its not that bad, but it is still really cool.
I haven't heard anything about that but it seems like it would be very good
It's surprisingly accurate to a real lever gun even down to the capatability with the short ammo. Alot of lever guns need short nosed bullets.
The Buzz Bee Rapid Fire Tek is probably the blaster Coop is referring to at 5:15. Lever action shell ejecting, but uses a box mag instead of a tube mag.
Nerf also has had a number of Level action blasters over the years. Including both shell and non shell based ones. Including the beloved Slingfire that was well before I got into the hobby.
@@Montisaquadeis Then there's BuzzBee's Sentinel... I'm glad I got mine when they were cheap, it will always be fun.
I had one, was my favorite nerf gun cus of the shells. I was salty that Nerf Nerf didn’t make a shell gun.
@@Montisaquadeis nerf hasnt made a lever action gun that uses shells
Buzzbee had made another lever action gun called the Sentinel
when i was 9, i got my first nerf blaster, it was a slingfire, and i got it, because i wanted to be like the scout from tf2. this brings back some good memories, thanks for the nostalgia, frank
Dude I feel like a kid on christmas when coop uploads. Love your content coop! Keep it up dudebro!
Bro same
Me too
Tacticool
Haha very relatable funny
-someone who dont celebrate christmast at all
@@jar_of_silly Extremely tacticool
That's damn clean. Lever action shell ejection was my favorite
If you like lever action try the scravinger nope I spelled that right ask nerf I don’t know 🤷♂️
@@virginiacouture3994 the scravenger is pretty meh compared to this
@@mikewizz1895 agreed
Tho more tactical
Hey Frank, loving the content, I think you should remake the heavy gunner showdown video as it was really fun the first time but now there are so many more options like af v twin, prometheus with and without hopper extensions, jupiter with proton pack, or even a perses with the OOD hopper.
can't believe now that hes coming back to his old self xd
@Miguel Rodriguez I think it technically isn't either of those, but it's definitely a niche video type
@Miguel Rodriguez I definitely don't think it is a comedy loadout video, it is basically reviewing lots of blasters that are similar to inform consumers which is the best for different needs
All these Shellington blasters are too cool for their own good
To be fair lever action rifles in real life are pretty temperamental too, only reason they are semi relevant are because of specialty cartridges a la 45-70 govt. Also wouldn't 3D printed plastic smoothen out over time?
Theoretically yes. But where does the extra bits that broke off to make it smooth go. Hopefully out, but it also may cause extra problems staying in and scratching everything further.
Or the .30-30. I got a Springfield chambered in this irl
They also make you feel like a COWBOY!!!
@@benhingley9523 true, the plastic particles that get scraped off often stay inside the blaster, but that's part of what you should expect from any blaster. It's good practice to open up a blaster from time to time and clean up/relube its internals in order to get rid of these particles collecting in the grease that coat the whole mechanism. Good maintenance keeps a blaster healthy ! :)
you don't own many lever actions do you? the entire henry corporation is built on reliable, affordable lever actions and they've had huge success and no complaints. marlin built their name mostly on levers, including the caliber you mentioned. even with them gone now, ruger bought the rights to keep making the lever actions. by all logic they're more reliable than any semi-automatic gun, and easier to use and quicker to load than pump actions. as far as plastic goes, i dont know id never buy adult nerf guns now that i know they're 200 dollars
I would like to mention that in a super stock war where you could still have an fps advantage with a Wingchester and a sniper scout role could be where this shines.
Every time I'm watching a review of a lever action blaster, I wish so much you could do the one-hand load. It would be so cool! Also, I love shell ejecting blasters. Wish you all the best!
The sound at 00:24 is so satisfying, it sounds perfect.
A little pointer a lot of us lever gun users do in person, get some paracord and wrap it around the lever loop. It'll help so you don't beat up your knuckles cycling the rifle.
I liked the Tactical Preview section at the beginning, very nice! It might also be fun to include some of your "hardcore parkour" testing procedure? 😂 Thanks for the great review! 🧡
This is yet another blaster of “OH MY GOD I NEED THAT” *sees the price* “Maybe nevermind”
The tactical preview segment was pretty cool, I wouldn’t mind them in future reviews!
These guys (the ones who did the spring thunder and this one) are pushing nerf further and further! They’re awesome!
..at this point , these blasters be looking cooler than real guns
Always have
To the point that sci fi films use nerf blasters all the time for movies
as they should…?
This blaster would also be sweet for the LARP community! Thanks for the review!
Years ago, I used to have a lever action blaster. It was like this blaster, but was magazine fed. Despite having to hunt down shells after running around the house with it, I was definitely in love with shell ejecting Nerf guns.
Yup, that's the buzzbee sentinel :)
Well, since you said it was shell ejecting, it's probably the rapid fire Tek.
I like this new highlight reel at the start! Hopefully you keep doing it, especially for things without an unboxing.
Suggestion for a review: the Skewer by Taffy.
Something like this that is actually mass produced and not 3d printed, at a more reasonable price would be awesome.
Yeah, 200 dollars is a little too much
I love the noises it makes while reloading it
These types of blasters look so fun to play with
Loved that preview at the start, keep doing what you do!
Can we appreciate how satisfying the rechambering sounds?
this looks so cool, imagine just showing up to a friends party with this!
😂
Yes, finally your profile picture has been changed! It's been years since you've changed it! Love it man!
I can see this being used casually as a sort of “power weapon” thats preplaced before the start of the war ala battlefield if everyone’s starting with ~70 FPS blasters
Ahhhh that good ol "What up dude bros"
guys at the war: nooo you have to use a battle efective rifle, that has flywheels and shoots fart!
us: Haha cowboy gun goes chik chik
This weapon is the reason I bought Slingfire. Its so fun to do the Winchestlet flip with it.
nice to see you coop! CANT WAIT TO GET SOME MERCH!!!
glad to see the old coop back
keep up the great content!
Every time I hear “what up dude bros” it makes me smile 😊
Good to see that you are
uploading normally now
I commented years ago asking for this! Finally!
"years ago" didn't the blaster release a year ago?
@@minezaac years, plural. But whatever
i am 16 now, i remember being very into nerf guns 5, 6 yrs ago, damn brings back memories, coop772 looks a lot different now, thanks for making my childhood fun
finally i've been waiting for so long for a dart blaster like this
it is the first time ive witnessed a toy gun sounds so goddamn close to the real deal, atleast the priming imo
I think the Spring Thunder is pretty realistic too!
Whats this? A high quality in depth third parry nerf blaster review with a funny and handsome host with years of content available to watch afterwards by golly I must subscribe
I kinda wanna see Coop’s “hardcore parkour” during the testing
It’s nice to see you healthy coop, great video
I haven't played with Nerf in years, but I still love coming to watch every time Coop uploads. Also noticed you changed the channel image. That picture of you totally screams "dudebro."
I've been waiting for a review or this and now I want one keep up the good work coop!
Amazing how advanced 3d printing has gotten
I think the people who are making these blasters are gonna go places.
man frank starting to look better again,losing weight etc. im happy to see it since i watch his stuff since ages and really love him even tho idc abt nerf since ages anymore
I had the exact same failure on my Wingchester as your first one. After several months, I am still awaiting remediation.
This might just be the most beautiful foam blaster in existance.
I love the way it looks!
OMG, I love the change for your UA-cam icon.
Oh my god its so DELICIOUSLY WELL MADE!!
Great vid as always, loved the "Tactical Preveiw"
"It’s kinda weird to shoot at first"
Coop: proceeds to never break sight picture. 🤣😂🤣😂
2:47 as someone who has used an actual lever action I can confirm that's how you do it also you can't keep your fingers on the trigger because that can get caught when you pull it back
Idk what you're talking about you usually keep your three fingers inside and keep your trigger finger just forward out of the way. Never seen someone actually take their entire hand out to cycle it unless it got jammed for some reason
Its nice to see my man reviewing yet another blaster from the modding community! (even if this is not a war practical blaster) Great video though!
Buen blaster, y buen video Coop772.
This reminds me of the yellow and green lever action blaster toy I had as a kid I remember ejecting the shells and catching them.
Wow, this is probably the coolest nerd gun I have ever seen.
3:28 “unreasonable to prime like thiswithought really hurting the back of your finger” *cloth wrap has entered the chat*
I just bought two of those. one for modding, and the other is for normal use and for my gun rack. for the modding one I replaced the spring with a weaker one to where its spring isn't as hard to prime. I also spray painted the outside. I also 3-D printed my own parts and replaced some of the parts so the gun has a bigger shell hold
Coop: it hurts to use the lever traditionally.
Me: laughs in tactical gloves
Congrats on your 900th vid coop!
i miss his old channel logo but keep making totally tacti-cool videos bro
Jaw dropping scene of Coop reenacting Texas Ranger with a Henry rifle. Circa 2022.
Coop this honestly hits HARDER then both the Max Stryker and Nexus Pro(Pro line of blasters) By a good 25FPS
Like the new cinematic firing.
If they made one of these for less performance oriented nerfers, say like a weaker spring and made it compatible with full length it would be awesome
coop should keep reviewing shell ejecting blasters
Coop's complaints about the grip are also assuming that you're running without gloves. I'd be wearing a pair of fingerless bicycle gloves if I were to go to a game with this blaster. That's my opinion, but having those gloves to pad my hands against the rougher parts of the blaster and prevent sweaty hands from letting my grasp on the blaster slip, and I'd go fingerless so my fingertips would still be exposed to do more dextrous tasks like pulling the trigger or loading shells into the blaster.
missed a few vids, and he's like half the size, damn man, props
Are we not going to acknowledge the ne PFP coop my guy after years and it looks pretty good
This is one I was waiting for I love lever action
I just love lever action guns it has a certain type of style
a well made shell blaster is always fun
Bro his hair grew and I just now realized it, it look great man
Its so funny looking that operating the lever action pulls the whole trigger off with it, but then puts it back in place and is still able to fire the blaster
lol i was so tired but now im feeling great lets go NEW COOP VID
Ultra 2 + Wingchester = A COWBOY
As a fellow Coop I will like this video for no other reason
I’ve been waiting for this review! Thank you
Cool new profile picture. I am still nostalgic about the old one.
I'd buy this if it wasn't 3D printed. I get they need to for cost reasons but if I'm dropping over 200 bucks on a blaster I want it to be smooth and reliable
definitely reliable
Man, wait til you see the cost of injection mods for something like this. Well over 3-400k USD.
@@hallepeek6465 I did end up getting one and while it feels solid it's definitely still fairly rough and some of my shells don't work properly due to them being a little off. Overall very happy but I basically have the exact issues I was expecting, I also have similar problems with the Spring Thunder, but again it's still pretty awesome despite the minor flaws
He did it! He did the impossible! He changed his UA-cam profile picture.
Honestly, I’d buy it because it would be perfect for my cosplay of Ashe from Overwatch! The design is perfect for it!
It would probably need a paintjob, but it would look good for that
Did i ever tell you how much i love shell ejecting blasters? I own 5 of them.
Can't wait to see your reaction to the nerf equivalent to a .50 cal Barrett sniper rifle.
Be nice if the lever bow was either straight or convex, instead of concave. Would be more comfortable to prime in the typical fashion, plus a wrap or gloves would help further.
Gdop back at it again with another cool blaster!
Red Dead Redemption vibe rifle, useful for being like a real cowboy
Now I’m waiting for them to make an auto shotgun that uses spring thunder shells and has a magazine
new presentation style is nice
Just found this channel, definitely great content!
I love the puns in the names "Shellington Wingchester" a nice nod to real life lever guns and to the firearm comunity
For those unaware on what im talking about, Shellington aka Remington and Wingchester aka Winchester. The bottom of a bullet casing aka brass or shell is called the rem so you can already see what they did there and I dont need to explain the Wing one, Pure genious
Hey frank just wanted to say I love ur new profile pic! And I’m glad to see that you are content with yourself and that your health is doing good physically and emotionally
happy 900th video coop!
Ik it’s a performance issue but having jams is cool especially because there are different types of jams that usual nerf guns, Ik it’s a nusence but having the occasional failure to feed, failure to eject, ect is cool
The real question is: can you spin chamber it?