2011 chevy Camaro radio removal and full install
Вставка
- Опубліковано 6 сер 2024
- 2011 chevy Camaro radio removal and full install. In this car audio tutorial I show you how to remove the faceplate and radio from this Camaro. I also go over the products that are used in the car audio install and how to flash your maestro piece properly. Then we go into how to finish up the double din install to where it looks perfect
Parts used for pioneer double din install
Maestro cam1 amzn.to/2ZQNC8u
Maestro rr amzn.to/2MWU77U
Pioneer avh-501ex amzn.to/2MSRIed
🔻
Want to support the Channel? Join me on Patreon and get exclusive content and GIVEAWAYS
www.patreon.com/bePatron?u=43...
🔻
For some competition bass visit www.skyhighcaraudio.com and use code jps_audio for a 5% discount
Phone I Use to record with
Samsung Glaxay 10e amzn.to/2SiKVKI
~Check out my first channel if you love BASS~ / jpsaudio08
~Tools I Use almost everyday~
Install bay panel removal tools: amzn.to/2Jv4XiP
Install bay Speaker tester amzn.to/2LHOYki
Digital Multimeter: amzn.to/2Hcz111
Milwaukee drills: amzn.to/2Lxvu1y - Авто та транспорт
Did you ever have any issue with the lock/unlock button on the head unit not working? I have a Kenwood DMX709S head unit, and the touch screen controls for the heated seats and rear windshield defroster also don't work as well. The key fob lock and unlock buttons (separate) still work.
Also note that the door unlock/lock button on the center of the head unit, seems to only work when the door is opened and it briefly gives power. After the dome light goes off (if set to door open/close), the lock/unlock center console button no longer has power; that is, unless you either turn the key in the ignition, hit the locks on the key fob, or open the door.
I tried checking all the fuses and relays, which are good and mainly in the engine bay fuse box. I even checked the 2nd fuse box that's in the driver side of the dash, on the side of the fan vent; nothing. I didn't bother going to the 3rd fuse "box" located in the trunk, under the carpet and mats, since I think there's nothing related there, not to mention it requires the trunk panels to be removed....
iMaestro dash kit buttons not working
Very well made video! But I do have 2 questions.
Is there an aftermarket backup camera thats compatible with that setup? And does that system have navigation or a way to integrate it?
I still uses my ipod in my 2011 camaro in the arm rest compartment will I still be able to use it with this kit I like the looks of it plus it cheaper than the pac which I brought last year and sent it back last year lls
Very nice integration.
I think so too!
Nice vid
Hello will the AVH-200ex pioneer radio work for this and is the video the same for a 2012 camaro ls??
I have installed this In my 2012 and my buttons are not working what could be wrong...I have a JVC headunit
Did you have trouble sliding the trim piece in? Mine is having trouble clearing on the sides of the bottom.
I have a 2011 Camaro LS and I got the cam1 with a pioneer avh-601ex but when I plugged it in it sounds out of phase. No bass and super low audio. Any idea what it could be?
I have a 2011 SS Camaro and I'm going to buy a 2015 Camaro radio with navigation what other wiring do I need to get that radio to work correctly?
Did you do the usb hook up?
Did you have to cut and splice into the factory wiring harness or did you have a connected to plug into the factory wiring harness to prevent cutting the factory harness?
No cut or splicing just wired the 2 harness together
hey how does the heated seat works in this? and got to mentioned this kit looks really nice
yes you can program your buttons to do anything including heated seats
Did dealer have to program it
Please help. Behind the stock unit are 2 seperate cables. Which 1 is for the radio fm antena?
on is sat radio and the other is fm usually the one in the white plug connector is fm and gold is SAT just depends on the colors you have but that should be them
Can it find a different radio with no name?
Did u need to buy the flash loader cable?
ADS-USB. To complete the install?
comes with the Maestro RR
Do you need the maestro rr in order for the cam 1 to work? Or can you just have the cam 1 by itself
You need the rr
Will the steering wheel controls still functions properly? And the door (lock and unlock) controls work?
yes everything still works properly
Hey so I have a camaro ls and I have put this type of stereo to my car do I have to buy the dash board as well or can I still use the one I have in the car?
Are you saying you have an aftermarket radio in now and you just want to swap aftermarket radios if so then yes you can use the same dash kit. If you have the factory in now then you will need to buy the dashkit
Can I use the Maestro rr with any radio I choose and still have the gauges, vehicle information and climate displayed on screen? Or do I need the Pioneer radio?
The maestro will work for any radio that is idatalink maestro ready but it depends on the car to what car features you may have for example i did a newer mustang and the maestro rr retains a/c and heated seats in the radio but my 08 camry the rr only shows stuff like gauges, battery voltage, tire pressure and if a door is open but i want it for the tire pressure soni was ok plus it had my steering wheel controls built in
Hi buddy, thanks for that video, but now I have a doubt , do I need a radio antenna adapter?
yes and no
yes because the factory antenna wont fit the aftermarket radio so you need it if you want to listen to the radio.
no because if you dont listen to the radio everything else will work perfectly fine without it. just no fm radio.
@@jptheinstallguy thanks buddy I already find it out, there's a perfect fit antenna adapter online for those Camaro and some GM that works nice and now my signal radio is better than ever , even get rid of my led lights interference noise www.amazon.com/dp/B0007WW64Y/ref=cm_sw_r_cp_apa_i_SKn-EbX83HFWA
What website to get it ?
Hey, Do you think a 7” screen will fit into the Maestro Cam 1 dash kit?
it will fit just fine i wouldnt get a motorized one though just in case
JPtheinstallguy Thanks
Hey bro what was the name of that web site . And like always keep up the good work. Making those videos.
no problem the site is maestro.idatalink.com
Hey what about the video bypass will the KIT fix that for me or do I need to purchase the bypass module for my pioneer?
try this vid out bruh about bypassing the brake ua-cam.com/video/PMVJVQxodtk/v-deo.html
@@jptheinstallguy ok I got the bypass module. On the maestro black box do I use the light green wire with the bypass and radio E-brake. Or just use the bypass and radio E-brake wire.
@@dreday4612 just use the one from the radio. The one coming from the harness doesn't matter when you bypass. It's literally there on the harness so you don't have to run a wire all the way to the e brake switch so when bypassing radios ebrake only use the radio.
How much it cost
Will a 7 in screen fit? Can it be modded to fit?
7 inch should fit just fine
Preciated
@@jptheinstallguy what kind of stereo would work for this kit
This will be my first time doing anything to a car is this difficult will I be able to do it?
you got this bruh
It’s a little difficult, but if you watch a few videos you’ll be fine
What’s the RR for ?
rr is the radio replacement module. the dash kit doesnt come with it
what if it says LOCKED..what do i do ??
does the factory radio or the aftermarket radio say locked?
Where are the knobs? With the knobs it makes it much easier to do things. Fail product.
9 people can’t do installs.