GOODMAN AMANA FURNACE NOT HEATING 3 COMMON DIAGNOSTIC CODES: HOW TO FIX THE CAUSES
Вставка
- Опубліковано 8 вер 2024
- This video will show the 3 most common error codes for a Goodman/Amana furnace. I will show how the unit acts as a result of the code and explain common things to look for and repairing them.
IF THIS VIDEO WAS HELPFUL CONSIDER THE THANK YOU BUTTON!!!
Consider supporting my Channel at my paypal
paypal.me/ihva...
link for camera I use to make videos amzn.to/3W6bEKi
link for camera gear I use to make videos amzn.to/3FJLiIo
link for drone I use for video amzn.to/3uZyg3H
Please consider subscribing to my channel. www.youtube.co....
To contact me email Renpavich72@gmail.com
Purchase new flame sensors for Goodman/Amana Furnaces
amzn.to/3hDsTPV
Klein 6 and 1 stubby screw driver
amzn.to/3pDT3F4
Furnace Magnet
amzn.to/3nqN5pC
PLEASE WATCH THIS FOR MORE INFORMATION ua-cam.com/video/_0sCWTy0MKQ/v-deo.html
Thank you so much !!1 Pressure switch was stuck open (bought a new one had same issue no ignition i was perplexed) then I watched your video. The needle in the metal hose grabber cleaned the obstruction and we have heat !!!!! wish I watched this before my order to Amazon !!! Thank you again!!!
Glad it helped!
Useful video. Thanks!
Thank you for this video I was able to diagnose and fix my Amana heater. I used the paperclip hack!
Loved the video you helped me greatly I was racking my brain my furnace wouldn't fire gas valve not turning on no voltage to igniter code 4 checked limit switch seemed good watched your video and learned there was a secondary limit switch on my Amana on the side of the blower motor actually 2 of them one on each side of the blower motor fixed them and kicked right on THANK YOU SO MUCH GREAT VIDEO
He explained very clearly
Glad it helped
I want to give thanks for the info on this video. I was able to get my heater up and running. Great video
Your welcome
Fantastic job explaining things.
Thank you
Glad it was helpful!
Thank you for a very clear and educational video. You explain and demonstrate things extremely well.
I wanna to take a moment to say thanks for this amazing video very helpful 👏
My heat is revving on auto wouldn't run. Put it on "on" and it's running! I guess I'll turn it on and off manually until I can figure it out. I miss my late husband who would've fixed this. Thank you so much for posting this video! Can't believe I needed it the night before Thanksgiving. I changed the batteries in the thermostat and the filter in the furnace, but neither worked. Thank you for saying that around 7:30 that turning it to on, it should run.
Happy Thanksgiving!~
It's been running ever since! Thank you so so much!
Fhank you for your advice! My Goodman furnace was in lockout mode due to too many start attempts. All is well now!
I'm glad it helped thank you for the feed back.
Thank you for the feed back glad it helped.
Thank you for the great video. I changed the furnace igniter. Works great.Thanks
Glad it helped
Thank you Brother. Great help
Glad it helped
1 st time watcher of uR Chanel so Pleased I did subscribe to your Channel ....Great Video for Inclined Home owners beginner HVAC techs or for even for an 27 yr seasoned Vet like myself ..I learned a few things to help simply testing Goodman error codes ..thank you very much .Note ..To Other subscribers out there ... this man Knows His Craft
Thanks! Got my furnace fixed after coming home to a cold house after vacation at 1:00 AM! Due to your video I was able to check the pressure switches and one had a couple of drops of water in it that was blocking it from working. Was on vacation and the heat wasn't on and the temps dropped a lot! Wondering if that caused the water to build up?
I'm very glad the video help.
My sister has the same Goodman furnace upright version and it would not work I replace the thermostat and still couldn’t get it to work only until you told me about the blinking light codes I was able to fix it had an open fuse circuit little number three purple fuse was blown replaced it and it fired right up thank you so much
Can’t edit on my phone but by the way it was 5° tonight in Kansas City and her pipes were froze so this really did help
I'm glad you found the video and I am glad you seen what you were looking for.
Thanks so much for the great video, it's been very helpful in my diagnostics
Your welcome
Excellent ..he is professional..
Thank you. I liked your thinking to help people.
Youre an absolute legend
Very good video!! Thank you. You saved me some serious cash.
Thank you!
Very good video
I have a Question, or problem with my Goodman Gas Heat furnace.... once every 3 or 4 weeks it won't come on. but works just fine 20 times or more per day for weeks.... Here is where it gets to.... draft fan comes on, pressure switch says OK, Red Glow on the igniter is fine... gas valve will not let it have gas.... Gas valve is fine for the 200 cycles it just went thru in the last 3 weeks, & I even Replace gas valve with a new one a few months ago.... So what step is between glow plug on and gas valve not opening.... that could be sporadic. that I should look at. Great Video and Thank you for your time.
High limit
Awesome video, my issue is the flames come on intermittently and cycles on and off while heating the house. Flame sensor switch and it was in quicker intervals. Think it may be faulty high limit? But it looks pretty clean to me. After watching this video think my issue may be pressure swith?
Poor air floor causes limits to get week must measure return air temp and supply air temp. See if that tells you something.
@@IHVAC i got it!! It was definitely the pressure switch but not the switch itself it was the lil hose, it was super loose. Gonna need to replace it had to secure it with electrical tape for now😅
I can check the pressure switch still not getting anything
I have a 4 blinking light indicator for open high limit. Should I order two replacement switch to start ? Any help would be greatly appreciated
My new Amana furnace red light is blinking at least 9 times. I know it’s a furnace, but does it have anything to do with the AC not blowing cool? The gas is not hooked up yet.
I have the same the same GoodMan heater furnace my problem is it works but, I just see that the light when I look at it it was red instead of green, how can I solve this problem? Thanks
Great video
Thank you
I have the same furnace. Mine has 4 flames tho. I have an issue where the heat comes on and sometimes it doesn’t swapped 3 thermostats. Currently using a plain one no WiFi. What would cause intermittent heat and i had one flash and cleaned the flame sensor. But hasn’t helped much thank you and appreciate any help
First thing I would check is airflow. Clean filters and make.sure registers are all open. Then I would clean the flame flame sensor. If your able to take a video of it not.coming on and let me see what the furnace is doing or not doing. My email is in the description.
according to the after hours tech the power is going into the connections on the gas valve but not going out ( to inducer and limit safety circut ) .. so i need a new gas valve ... he wanted $790 for a $300 gas valve
This video is great! I really learned a lot, and it was helpful to see the error codes and causes.
Glad it helped!
Please give the video a like and subscribe. Want more videos have a question lmk. Ty
Hi thanks for the video. Hope you can point me out on my problem. I switched from heating to A/C and my SSZ14 is not starting. The error code on my goodman furnace AVPTC is C1 - LOW STAGE COOL - LEGACY MODE ONLY. Do you have any idea how to resolve this issue. The unit was working great during winter but now switching to A/C and the heat pump is not starting anymore. Thanks Hugo
So I broke the tip of the ignitor , having issues finding the new part. Any ideas on how to repair the tip?
Buy a universal igniter
I got a amana air command 95.
I got 4 flashes. Open limit.
Blower is staying on i know its suppose to stay on with a open limit.
I got continuity through both limits and continuity through the wires from limit to the plug on the board.
I also jumped the limt just to make sure it wasnt the problem.
Filters clean,vents are all open.
Its not overheated, its been sitting all day with the power.
Bad board?
Maybe a manual reset high limit by the blower housing?
@@IHVAC no
Just the limt and a roll out switch above the burnners
@@IHVAC i replaced the board.
Got heat again
I have no flame
Ok I'm kinda stuck. My furnace turns on , gas turns on, fan turns on, emergency heat works but when I switch to auto it starts blowing cold air. Any ideas ?
I have a Goodman GKS90, LED steady light, igniter glows red but no flames, nothing blowing out the house heater vents. Anyone have an idea? Tnx
Gas valve off or closed or low pressure switch maybe not closing
Hi my name is Alex I just saw your video and what my furnance does is that the blowers goes on and the ignitiator goes on and aftet 10 seconds goes off and that set. the LED signal just stay on and the flame never turn on. what can I do. please need help.!!
Pressure switch is open? What type of furnace?
4 blinking lights code ,what is that
What if the blower motor starts first
My code light is not blinking it's just solid and my nighter is not catching it's like it's not getting any gas
I got an amana furnace that inducer turns on and quickly dies and i get 8 flashes. Ignitor reads zero ohms.
Replace ignitor.
Thank you. I got a new ignitor and it now ignites but theres no flame.i get 24v to gas valve and gas valve is not opening. I gotta get a new gas valve now. I never knew amana checked ignitor after inducer
The flame is not turning on at all just making noise off the furnace m. Help please thank you
Renpavich72@gmail.com email me your number and I'll help you
I have 3 3 second blinks what is that?
Open the panel.it should tell you what that means
I'm begging someone for help here!!! We purchased a Goodman furnace in September of this year, we've gotten them before. Our furnace will not run continuously, it ran for 8 days max. We have followed all the instructions had HVAC guys come here to install parts, as we were directed to do. We have everything documented, recorded as we spoke to the distributor which would be an HVAC direct. They Told my husband he was a "do it him selfer" and we just wanted free parts". No we don't, we want heat, I was told at one point not to lecture this one rep as we were talking. Yes I'm frustrated but I was rude, we even asked if they would send a representative out here to help us, told them if we messed up we would pay. They told us NO! This was HVAC direct, we are not looking for hand outs. We are looking for someone to help us please!! We live near Lake Ontario it's gonna get cold here, my husband has followed everything by the book. My next step is the news, but I don't want to do that. So please, please, will some one reach out to us whom has experience in this and with these furnaces to help fix this!!
EMAIL YOUR NUMBER LETS SEE IF WE CAN FIX IT? RENPAVICH72@GMAIL.COM
You can break that pressure switch doing that 😀
I can check the pressure switch still not getting anything