My exact problem but I was a bit hasty and got water on the floor that was held up in the machine. Have a couple buckets handy and this one is easy. Good thing I left the cover off for a bit because I had to pull another sock out after 1 load. 10 years no issues and this happens twice in a row in one day.
Hey Michael, That usually means there are a couple of burned out spots on your timer on the cycles it to use the most. Replacing the timer should cure that problem
Hey bro I change the timmer works gd for 3 months now it's not washing. Its filling but not washing lit switch gd pump gd actuator gd but keep hearing the relay switch at the back of the machine has a circuit board with 2 relay on the board and one of them is clicking off and on
So should I be checking anything if the belt breaks or is it just a thing that happens when you are continuously running heavier loads such as blankets etc. Ours just broke today while washing a blanket. Your video got me to the belt in about 30 seconds. Was thinking I was gonna have to take it all apart. Thanks
I’m having the same problem. My washer runs water fine during cycle. It was agitating really slow at first during spin mode, but it doesn’t fully spin to get all the water out. When I spin the inside drum manually, I see the belt turning with the agitator from the inside, but it doesn’t drain or spin on its own. What could that problem be?
Have a Frigidaire stacked washer and dryer model number FFLE2022MW1. W ont rinse and spin. I replaced the pump and the belt is good. Still won't rinse and spin. Help😂
Model FLCE7522AW .... brand new... water fills, agitates and drains, but does not spin for wash cycle or rinse cycle. Can't wait for warranty repair guy.
@@ScottTheFixItGuyChannel when you say the transmission may be locked do you mean specifically the box or could there be some locking of the bearing on the shaft under the box. I ask this because in spin mode the entire transmission box spins anti clockwise and in sync with the shaft and spin basket, implying that the gears in the box are not influential.
You can put 2 men’s dress belts under the agitator on either side and then close the belts and then use a broom handle to go through the belts and then lift.
Great Question Jonathan👍 Click Here to Get Live Expert Help From Me For Just $5.00: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin We’ll Get It Fixed 👍
Thx man, saved me buying a new one.
Glad I could help👍😊
My exact problem but I was a bit hasty and got water on the floor that was held up in the machine. Have a couple buckets handy and this one is easy. Good thing I left the cover off for a bit because I had to pull another sock out after 1 load. 10 years no issues and this happens twice in a row in one day.
Thank you for this instructional vid. I just replaced the belt and it's running like new.😊
Very cool, thank you
This video is a life saver. Thank you!!!
You are most welcome😊
You rock! Thanks for the info!
Thanks so much 😊👍
Do you guys answer these questions or there just on here because some are kinda old I really need your help
What problem are you having? You can send me your question to: scottthefixitguy@yahoo.com
New belt motor running fine ....but not turning drum.....seems stiff in counter clockwise...
My Frigidaire quiet pak stack
Great video how about the dryer mine is not spinning.
Sounds like a broken belt👍
I was wondering if the machine doesn't drain the water or spin is this the belt or switch on a stackable
Hi Chris,
I think it’s the Lid Switch
our thin twin wont stop spinning on any cycle except when on delicate. any advice
I have a different model same problem am only getting the rinse spinning only if I put it in that mode not working on normal or heavy duty
Hey Michael,
That usually means there are a couple of burned out spots on your timer on the cycles it to use the most.
Replacing the timer should cure that problem
Hey bro I change the timmer works gd for 3 months now it's not washing. Its filling but not washing lit switch gd pump gd actuator gd but keep hearing the relay switch at the back of the machine has a circuit board with 2 relay on the board and one of them is clicking off and on
My model is ffle3911Qwo has no belt
What could be the reason that the dryer doesn't spin, same model. Tganks
The belt either slipped off or broke. Can you hear the motor?
It was the belt, I fixed it already, thank you.
Thanks
You’re welcome 😊
So should I be checking anything if the belt breaks or is it just a thing that happens when you are continuously running heavier loads such as blankets etc. Ours just broke today while washing a blanket. Your video got me to the belt in about 30 seconds. Was thinking I was gonna have to take it all apart. Thanks
Thank you Justin👍💡
HELP!! 😡🙀 There is a loud noise while draining and it won’t spin afterwards. What do you think it might be and what should I do?
Can you send a video of that to my email at: scottthefixitguy @yahoo.com
@@ScottTheFixItGuyChannel just sent it. cheers
My belt is fine. Motor is making a loud noise and click in and out. Smell like something is burning. Any help please
If the washer works fine but the final spin won't spin what could it be?
That’s the door switch or the motor controller. I would try the door switch first since it’s cheap.
I’m having the same problem. My washer runs water fine during cycle. It was agitating really slow at first during spin mode, but it doesn’t fully spin to get all the water out.
When I spin the inside drum manually, I see the belt turning with the agitator from the inside, but it doesn’t drain or spin on its own. What could that problem be?
You're hired!
What’s reason my dryer just spin 3 seconds and turn off ?
Can you send that same question to: scottthefixitguy@yahoo.com
Have a Frigidaire stacked washer and dryer model number FFLE2022MW1. W ont rinse and spin. I replaced the pump and the belt is good. Still won't rinse and spin. Help😂
I think it’s the lid switch 👍
Bro I got one. Problem water not receiving or spinning
My belt is not broken but when the motor comes on the motor will spin but the belt will not move so the belt was Bernie
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
What is the model # of this machine?
Model FLCE7522AW .... brand new... water fills, agitates and drains, but does not spin for wash cycle or rinse cycle. Can't wait for warranty repair guy.
Were you able to figure the issue? Mine does the same thing. Agitates but won’t spin at the end of the cycle.
Tried to put new belt on and I can't get it to rotate clockwise to self feed. So hard to turn it I don't know
It should be ok to turn it the other way👍
The close washer lid keeps blinking and it want spin the water out
Gotcha,
Just need to replace the lid lock. Contact me at: Scottthefixitguy@yahoo.com and I’ll help you.
I have this exact model. Mine agitates but won't do the final spin, just loud and rapid clicks, any idea of what that could be?
You can remove the front panel and watch when it goes to spin. The transmission might be locked.
@@ScottTheFixItGuyChannel that sounds expensive.
@@ScottTheFixItGuyChannel when you say the transmission may be locked do you mean specifically the box or could there be some locking of the bearing on the shaft under the box. I ask this because in spin mode the entire transmission box spins anti clockwise and in sync with the shaft and spin basket, implying that the gears in the box are not influential.
Is the Frigidaire Laundry Center worth buying for $1,700? How reliable is this unit?
no
No But for 300 bucks in offer up yes
Worst machine ever!!!
Bought this garbage 3 years ago and have regretted it since day 1 !
What problem does it have?
Something has got under the Agitator
Please show me how to get it out from underneath
You can put 2 men’s dress belts under the agitator on either side and then close the belts and then use a broom handle to go through the belts and then lift.
Ne agitates but wont spin out.
Great Question Jonathan👍 Click Here to Get Live Expert Help From Me For Just $5.00: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
We’ll Get It Fixed 👍