@@TanDiego thank you for this video, as always very helpful. Question: Insignia NS-BC115SS9 is not meant for a built-in cooler (not mean for undermount) it is a free-standing cooler, is it still working for you?
@@jxstudiollc I’d also love to know if it’s still working well, but Diego mentioned he wanted it free standing in case it needed swapped out (and would be good in case repairs were needed). Smart thinking! I was about to create a more permanent fixture but am now rethinking the practicality of that.
@@hollyfleischer2984 free standing cooler should work, but better to get undermount cooler which will have an heat exhaust in the front, and no heating issues for a little extra $$.
Wasn’t sure I would be able to find a video that would help me execute my vision in the space I have. After finding this it was perfect! A quick trip to Lowes and an hour later I have transformed my space. Thanks for the help!
Wait!!! But how did you install the trims that fill in the super small slits between the cabinet and fridge??? Just wood glue? 😭🙏 please help! Thank you
This is exactly what the plan I had in my mind on how I want to do my project. Came on UA-cam to see other people's ideas on how other people do it. Looks like that's the best method. I like how you used a level to find where to put your support piece of wood. I 1as thing of just using my laser level but I think the ruler level will be easier and sufficient thanks!
Thank you! 😊 here is a link to the fridge www.bestbuy.com/site/insignia-115-can-beverage-cooler-stainless-steel/6191309.p?skuId=6191309&ref=212&loc=1&extStoreId=188&ref=212&loc=1&gclid=CjwKCAjwj8eJBhA5EiwAg3z0m-CFPa_6NV7TIOHBvHskASrSu5vLOBhCQRBiZzcJ9ExxVlKkNVv0ERoCQKoQAvD_BwE&gclsrc=aw.ds
What you could do to make the circular saw cut straight is screw a straight scrap piece to the part of the cut youre not going to use. Then you just saw with the circular saw flush against that piece all the way down.
Whoever is going to attempt this, keep in mind the OP did not use the correct fridge. You will need get a 'built-in' type fridge. What this means is that the fridge will have a front vent at the bottom or top so that it will not overheat. If you choose to use a fridge like in this video, you will need to give lots of opening around the fridge for proper ventilation or you run the risk of the fridge overheating and/or fire...
hence the title "built-in," the fridge I chose works for me and my space, it has plenty of room for hot air... if any to escape. I can easily swap in a built-in fridge but thanks for contributing.
Very Cool Tan!!! Quick question. You said you did not secure it so I'm guessing no issues with movement of the fridge when opening/closing door. Did you have any issues with the fridge overheating since the back is closed? Thanks and I loved "if I can imagine it I can do it"
@@Nicky68Y Thank you very much! No issues at all, it is still running fine, I didn’t close the gaps around the fridge so air can still come out and there’s quite a bit of room between the wall and the back of the fridge.
Do you have a floating floor? I am about to install something similar but I have seen videos that say if you have a floating floor you need to cut it to the cabinet size.
I’m a bit late to the party, but are you sure that fridge is meant to be countersunk like that? Most affordable mini fridges are standalone. You need a front venting fridge for this.
yes I put in the description *** The standing fridge I used works for my space and it is not enclosed and it has plenty of room for hot air to escape, it is however recommended to use an actual built-in fridge with a vent from the front if you are going to enclosed the fridge. ***
Great idea but that doesn’t look like a “built-in” ready fridge. Looks like a “stand alone”fridge which means it does not have adequate ventilation therefor cutting its life short and keeping the fridge from peak performance.
@@TanDiego There’s only so much air the fridge can draw from the area behind it making the fridge work harder and use more energy to keep a steady temperature. It may still be working but I can assure you it’s drawing more energy than it should, but to each their own right?🤷🏻♂️
Hey, Tan. Trying to do a similar project and want that exact mini fridge. Do you know the brand and any other info? Thanks!
Joe Bobillo hey Joe, it’s the Insignia NS-BC115SS9 115 can beverage cooler, I see it at best buy for $229.
@@TanDiego thank you for this video, as always very helpful. Question: Insignia NS-BC115SS9 is not meant for a built-in cooler (not mean for undermount) it is a free-standing cooler, is it still working for you?
@@jxstudiollc I’d also love to know if it’s still working well, but Diego mentioned he wanted it free standing in case it needed swapped out (and would be good in case repairs were needed). Smart thinking! I was about to create a more permanent fixture but am now rethinking the practicality of that.
@@hollyfleischer2984 free standing cooler should work, but better to get undermount cooler which will have an heat exhaust in the front, and no heating issues for a little extra $$.
Wasn’t sure I would be able to find a video that would help me execute my vision in the space I have. After finding this it was perfect! A quick trip to Lowes and an hour later I have transformed my space. Thanks for the help!
Aww glad it helped! ☺️
For cutting the counter top straight a clamped down straight edge fence would help nail the line 👍 awesome project man
Thank you!
Thank you for sharing. Came out really good. I’ll be trying - wish me luck!
Thank you! Good luck!
Wait!!! But how did you install the trims that fill in the super small slits between the cabinet and fridge??? Just wood glue? 😭🙏 please help! Thank you
They are held by brad nails
This is exactly what the plan I had in my mind on how I want to do my project. Came on UA-cam to see other people's ideas on how other people do it. Looks like that's the best method. I like how you used a level to find where to put your support piece of wood. I 1as thing of just using my laser level but I think the ruler level will be easier and sufficient thanks!
Glad it helped! 😊
Wow this came out great and looks way easier than I expected. I had no idea you could just buy base cabinets pre-assembled like that. What a relief!
Thank you! Yea it’s pretty simple!
Looks incredible! Thanks for sharing!
thank you!
New subscriber here. I’m literally obsessed with you DIY! Keep up the good work! Aloha from Hawaii 💖
Aww thank you! Definitely more videos coming! 😃
looks great! that's one way to kill some time during this quarantine.
Awesome, need the size of the mini wine fridge. Love your work! 💯💯💯💯❤️❤️❤️❤️
Thank you! 😊 here is a link to the fridge www.bestbuy.com/site/insignia-115-can-beverage-cooler-stainless-steel/6191309.p?skuId=6191309&ref=212&loc=1&extStoreId=188&ref=212&loc=1&gclid=CjwKCAjwj8eJBhA5EiwAg3z0m-CFPa_6NV7TIOHBvHskASrSu5vLOBhCQRBiZzcJ9ExxVlKkNVv0ERoCQKoQAvD_BwE&gclsrc=aw.ds
Thank you, this was exactly what I was looking for!
Glad it helped!
this is exactly how i want mine! wow thank you keep up the great videos!!!
You never disappoint
Thank you! 😅😊
Great job, Tan. This is exactly what I needed to know. Thank you so much!!!
FabulousNtheKitchen Glad it helped! 😊
Fantastic, this is what I'm going to do since my nook is only 53" wide
Nice!
What you could do to make the circular saw cut straight is screw a straight scrap piece to the part of the cut youre not going to use. Then you just saw with the circular saw flush against that piece all the way down.
Whoever is going to attempt this, keep in mind the OP did not use the correct fridge. You will need get a 'built-in' type fridge. What this means is that the fridge will have a front vent at the bottom or top so that it will not overheat. If you choose to use a fridge like in this video, you will need to give lots of opening around the fridge for proper ventilation or you run the risk of the fridge overheating and/or fire...
hence the title "built-in," the fridge I chose works for me and my space, it has plenty of room for hot air... if any to escape. I can easily swap in a built-in fridge but thanks for contributing.
Looks great
Thank you
Thank you for this! Definitely going to try this
Wow that looks amazing!
Clari Nguyen you’re amazing
Very Cool Tan!!! Quick question. You said you did not secure it so I'm guessing no issues with movement of the fridge when opening/closing door. Did you have any issues with the fridge overheating since the back is closed? Thanks and I loved "if I can imagine it I can do it"
@@Nicky68Y Thank you very much! No issues at all, it is still running fine, I didn’t close the gaps around the fridge so air can still come out and there’s quite a bit of room between the wall and the back of the fridge.
Solid!
Is your wine dry getting good ventilation. I would have used a bottom vent fridge.
Yes. There’s tons of room behind it. Plus there’s gaps on all sides for air to come out, it doesn’t get hot
That’s really nice!
Thank you! 😊
You did a great job!!!
Thank you! 😊
Awesome. Thank you for sharing.
Thank you for watching 😊
great job
Thank you!
No thank!!! I can do it myself is right 🙌🏾
When there’s a will there’s a way!
Brilliant Idea!
I am such a fan
Stephanie Nguyen make sure you hit subscribe, just don’t show my mom [insert nervous laugh]
Great job! How did you keep the trim pieces in place?
Thank you, I nailed little blocks to the adjacent surfaces as backings then nailed the moldings in front of them
if this fridge is not meant for in countertop is there any heating issues with the exit ventilation?
It is still running today, I did not seal it like you would with a built in fridge
ty@@TanDiego
You are amazing!
Great job 👍🏾
Charles Johnson thank you!
Do you have a floating floor? I am about to install something similar but I have seen videos that say if you have a floating floor you need to cut it to the cabinet size.
Yes I do, I just set it right on top of the floor and it has been fine.
Really nice.
Thank you!
Nice job!!! What wood did you use for the the trim pieces?
Thank you. They are just white cabinet trim pieces around the cabinet section from Lowe’s
Did you add the cabinet trims via sillicon adhesive, or is it attached in another way? Thanks!
C L I used small blocks to have them rest against and small nails and caulking to hold them in place
If you have an ugly standard size mini fridge, would it fit under there rather than beside it?
Sunshine & Raindrops it depends on how wide your space and which cabinet you choose, you can use trim pieces to fill in the gaps
I’m a bit late to the party, but are you sure that fridge is meant to be countersunk like that? Most affordable mini fridges are standalone. You need a front venting fridge for this.
yes I put in the description *** The standing fridge I used works for my space and it is not enclosed and it has plenty of room for hot air to escape, it is however recommended to use an actual built-in fridge with a vent from the front if you are going to enclosed the fridge. ***
The only thing I would’ve added is a pop up extension for charging devices
Hi how did you put the trim pieces?
You can glue them or nail gun them in. I just attached them on whichever surface they can rest on
Awesome job! Could you share the link of the cabinet trim pieces that you used?
Thank you! here you go hope that helps
www.homedepot.com/p/100533083
@@TanDiego Thanks so much! Did you use the circular saw to cut these as well?
@@mdeang2 I used a miter saw 🙂
300$ bucks for labor to install it. Handyman musta been hurting for work
Good
Great idea but that doesn’t look like a “built-in” ready fridge. Looks like a “stand alone”fridge which means it does not have adequate ventilation therefor cutting its life short and keeping the fridge from peak performance.
I can just slide in a “built-in” fridge, I didn’t want to pay $1k. Plus there’s a ton of space back there, still working 😏
@@TanDiego There’s only so much air the fridge can draw from the area behind it making the fridge work harder and use more energy to keep a steady temperature. It may still be working but I can assure you it’s drawing more energy than it should, but to each their own right?🤷🏻♂️
@@DuraTex556 it’s a diy, I’m sure someone has a better video
@@TanDiego You’re video is a great, don’t get me wrong. Just pointing out that there is a built-in cooler that is made for these types of situations.