Best Devilbiss Air Cap for Clear Coating on the pro or pro lite

Поділитися
Вставка
  • Опубліковано 11 гру 2024

КОМЕНТАРІ • 59

  • @bensonporter1384
    @bensonporter1384 2 роки тому +2

    I like the te20 cap it works the best with shinning and wet finish.....devilbiss prolite or pro is the best spray gun in england !!!!!!

    • @dredfxcustompaint
      @dredfxcustompaint  2 роки тому +1

      Hi Benson they are great guns that last 💪 thanks for the feedback 👍

    • @TheRolfano
      @TheRolfano Рік тому

      @@dredfxcustompaint what air pressure did you use for the Te10 base and TE20 clear?

    • @dredfxcustompaint
      @dredfxcustompaint  Рік тому +3

      @@TheRolfano hi the base coat te10 I was using 22 psi and the clear coat cap te20 2bar

  • @JohnWD40TC02
    @JohnWD40TC02 2 роки тому +1

    Hi Rob lovely finish on those fenders mate👌 the TE20 is a perfect cap if you are in the booth and are a pro painter like yourself as it gives a nice finish plus it will give you the OEM peel if needed but it does use a fair bit of air for the home/diy user, I do have the TE20 and it does the job but for me I prefer the T110 as I don't need a OEM finish.
    I've been fighting for the last couple of years to get rid of the unintentional OEM peel in my finishes so I'm in no hurry to put it back again!🤦‍♂😆😆

    • @NathanClevenger1337
      @NathanClevenger1337 2 роки тому

      Used this gun with the TE20 & 1.3 nozzle @14psi to paint my buddies street bike candy red. And I did this in my garage.... Bike looks like it has a factory paintjob, mind you that was my first paintjob and it looks that good. That setup and gun are amazing!! I also have an old ass Craftsman 30gal 6hp from the 90s that my Father gave me. Only thing I've done to it is build an aftercooler for it.
      Hope you wear a full face when you spray clear in your cool little paint booth.

  • @ANDY-we7mr
    @ANDY-we7mr 7 місяців тому +1

    JUST SEEN THIS VIDEO ROB GETTING MY DEVILBISS PRO LITE TOMMORO ANDY 1.3 TE10 CAP MATE FOR BASE COAT PAINT BUT SOME PEOPLE SAY 1.2 I HAVE PRICED ROB THE FULID TIP ON EBAY THERE ABOUT £95 FOR THE 1.2 AND THE TE20 ABOUT £137 FOR THE AIR CAP MATE BETTER OFF JUST GETTING ANOTHER GUN IN THE 1.2 WITH THE TE20 AND YOU HAVE ONE FOR CLEAR COAT PAINT AND ONE FOR BASE BRILLIANT VIDEO THAT FINSH ROB OUTSTANDING

    • @dredfxcustompaint
      @dredfxcustompaint  7 місяців тому +1

      Nice on mate 👍

    • @ANDY-we7mr
      @ANDY-we7mr 7 місяців тому

      @@dredfxcustompaint ITS COME MATE FROM SPRAY GUNS DIRECT DONE ME A CRACKING DEAL ANDY I LOVE IT CRACKING GUN 1,3 TE10 FOR BASE

    • @dredfxcustompaint
      @dredfxcustompaint  7 місяців тому +1

      @@ANDY-we7mr sweet mate 👌 enjoy the te10 lays a nice coat of clear down aswell

  • @BearBudgetgarage
    @BearBudgetgarage Рік тому

    Watched a lot of video before deciding to lay out the money for the Pro Lite. Can't wait for it to get here to try it out. I went with the T110 for hs clear non-oem finish. If its a little slower, ok. I want the smoothest off the gun finish to reduce time spent on buffing. Would be nice to only have to denib w minimal buffing

  • @deanbrown7643
    @deanbrown7643 2 роки тому

    Yeah man sensible choice on the clear 👍👍

    • @dredfxcustompaint
      @dredfxcustompaint  2 роки тому +1

      Yes mate love this cap for clear 👍

    • @deanbrown7643
      @deanbrown7643 2 роки тому +1

      @@dredfxcustompaint so do I mate so do I 👍👍👍👍

  • @deacdaniel6425
    @deacdaniel6425 Рік тому +1

    Hello, what do you recommend, iwata supernova ws400 hd 1.3, or devilbiss gti pro lite T20, T110 for varnish, and which one is more reliable...? Thank you!

    • @dredfxcustompaint
      @dredfxcustompaint  Рік тому +2

      Hi if you was going for an iwata ws I would go for the new version
      But if your thinking devilbiss go for the dv1 that's my go to clear coat gun with the c2 air cap the next option would be gti Pro lite with the t110 air cap .as for availability it depends on where your based 🤔

    • @deacdaniel6425
      @deacdaniel6425 Рік тому

      @@dredfxcustompaint thank you!

    • @deacdaniel6425
      @deacdaniel6425 Рік тому +1

      Sorry to bother you again, but what do you think of devilbiss gti pro lite T20, T110 vs sagola 4600 Titania 1.3 digital?

    • @deacdaniel6425
      @deacdaniel6425 Рік тому

      Devilbiss gti prolite spralien has two air heads in package T20 and t110

    • @deacdaniel6425
      @deacdaniel6425 Рік тому

      ???

  • @theDelinquenC
    @theDelinquenC 3 місяці тому

    Hi Rob, have you used teh Devibliss SLG 610 at all? I want a budget spray or mini for spraying clear coat and possibly gesso/primer max size will be around A2, don't really intend doing that much with it so cheaper the better but still like a quality gun that works. I atm have a Sparmax 610plus which goes up to 40psi do you think this would be a good combo for finishing artworks off and just giving them the gloss factor? Thanks

    • @dredfxcustompaint
      @dredfxcustompaint  3 місяці тому

      @@theDelinquenC hi the compressor may struggle with a bigger spray gun have a look at the A.N.I mini spray guns they come up cheap but do the job very well have a look on www.spraygunsdirect.co.uk

  • @Cobra427Veight
    @Cobra427Veight Рік тому

    Hi Rob, beginner here , I bought a devilbiss gti pro lite , I was told that 1.4 was a general purpose size , but after seeing some charts, will it be too wet ?will I be able to adjust ok it has a t110 air cap . I am painting some motorcycles and will be using a medium metallic basecoat and a red candy on one bike, the other is an old 49 matchless G80 so it's just gloss black . Will I have to buy a 1.3 ? Do you have to buy a matching needle or is that only if it's old and worn , appreciate any info , Cheers.

    • @dredfxcustompaint
      @dredfxcustompaint  Рік тому +1

      You should be fine with the 1.4mm set up just set the fluid and you will be good 👍

  • @cg7975
    @cg7975 Рік тому

    Hello, i have a GTI Pro with a 1.3 tip. The air cap is a trans tech T2. Is this the same asvyhe T20 cap you are tslking about, and is my set up ok for base snd clear? Thank you.

    • @dredfxcustompaint
      @dredfxcustompaint  Рік тому

      Hi yes that cap will be fine for base and clear

    • @cg7975
      @cg7975 Рік тому

      @@dredfxcustompaint thank you very much for your prompt reply - puts my mind at rest. Will continue to watch your videos.

    • @dredfxcustompaint
      @dredfxcustompaint  Рік тому +1

      @@cg7975 your welcome enjoy the gti Pro it's a brilliant gun

  • @B15SDMDESIGNS
    @B15SDMDESIGNS 9 місяців тому

    Can you spray metallic basecoat with the te20 cap?

  • @Berecki2
    @Berecki2 Рік тому

    Good job. Mind me asking, what pressure gun settings are you useing for clear?

    • @dredfxcustompaint
      @dredfxcustompaint  Рік тому

      hi 2bar pressure

    • @Berecki2
      @Berecki2 11 місяців тому

      ​@@dredfxcustompaint Thanks. Fan wide open I guess. What about the fluid?

    • @Berecki2
      @Berecki2 11 місяців тому

      ​@@dredfxcustompaintYou use reducer/thinner in the clearcoat?

    • @dredfxcustompaint
      @dredfxcustompaint  11 місяців тому

      @@Berecki2 full fan full fluid and 10% thinner

  • @marjollupo1826
    @marjollupo1826 Рік тому

    Hi 👋 can i use for primer Te20 nozzle 1.8mm?

    • @dredfxcustompaint
      @dredfxcustompaint  Рік тому

      Yes but I would go for a flg5 1.8 for primer it's a cheaper gun

  • @jamesdietz5977
    @jamesdietz5977 8 місяців тому

    What size tip are you using in this video?

  • @edmacrae4521
    @edmacrae4521 Рік тому

    Would you recommend the av-212-14 on a GTI-620G millennium edition with #2000 aircap

    • @dredfxcustompaint
      @dredfxcustompaint  Рік тому

      Hi Ed not heard of that sorry

    • @edmacrae4521
      @edmacrae4521 Рік тому

      @dredfxcustompaint I was reading a post that the av,212,14 on the gti millennium spray clear like pure glass no orange peel, I just received my first devilbiss and it's and older model but from what I've read is still a very good gun, like I said before it's the GTI-620g and it came in a box woth 3 fluid tips but only 1 needle and the #2000 air cap I thought I'd have to change the needle with the fluid tip as well but it's saying it only comes woth the one needle and that you can switch between the 1.3 1.4 and 1.5 willing same needle

    • @edmacrae4521
      @edmacrae4521 Рік тому

      @dredfxcustompaint it was brand new never opened but I still know little about the guns and outs parts that are being promoted in the box lol

  • @ChepeMata-y8w
    @ChepeMata-y8w Рік тому

    What’s your setting on your tekna gun for base paint? Setting for fluid and fan

    • @dredfxcustompaint
      @dredfxcustompaint  Рік тому +1

      Hi base coat settings are full fan full fluid and 22 psi

  • @DEEPWATER..
    @DEEPWATER.. Рік тому

    you Haven't tried the T110 aircap

    • @dredfxcustompaint
      @dredfxcustompaint  Рік тому +2

      Hi I have done there are videos on the channel with the t110 air cap
      It's great if you want a flatter finish

    • @DEEPWATER..
      @DEEPWATER.. Рік тому +1

      @@dredfxcustompaint Yes, it gives you great results, very smooth

  • @mickwoods8319
    @mickwoods8319 4 місяці тому

    Dv1 base gun best for base

    • @dredfxcustompaint
      @dredfxcustompaint  4 місяці тому

      @@mickwoods8319 not tryed it yet but all I would need is the air cap for my dv1 as its the same gun will give it a go definitely
      Thanks for the feedback

    • @WonTooForAte9
      @WonTooForAte9 4 місяці тому

      Why do you say best? I have a dv1, tenka copper, and pro lite. I've used te10 tekna for base and pro lite te20 for clear. That tekna is just as good as laying silver base as the dv1. It's not the guns...it's the people using them with little experience. Porphis spray guns blow devilbiss, sata,iwata, Sagola away on price and spray better than some listed above.

    • @mickwoods8319
      @mickwoods8319 3 місяці тому

      A have been painting cars for forty years tried many guns a worked in a garage that restored cars my boss was a sata man he had tall the models he tried my dv1 he said it was far better than his guns

  • @slackerzsincity8822
    @slackerzsincity8822 6 місяців тому

    My opinion is that the TE10 lays flatter for clear coat. You gotta give it a try instead. Its a flat finish without trying.

    • @dredfxcustompaint
      @dredfxcustompaint  6 місяців тому

      I have tried it and it lays a cracking coat down 👍

    • @slackerzsincity8822
      @slackerzsincity8822 6 місяців тому

      @@dredfxcustompaint t110 is to slow watching it go on the panel vs the TE10 way more speed .

  • @Igotaglockonme
    @Igotaglockonme 6 місяців тому

    You paint soooo slow brother you wouldn’t make it in America that’s for sure