How to make Automatic Hand Sanitizer Dispenser | DIY
Вставка
- Опубліковано 13 тра 2021
- Hi All,
In this video we are going to make automatic hand sanitizer dispenser.
The idea behind this is to detect the presence of hand using IR sensor and turn on dc pump to dispense the sanitizer.
This will be useful at every household.
👉Please subscribe: ua-cam.com/users/hashinclude...
👉Components list:
✅ 5V relay amzn.to/3pWsr2u
✅ IR Sensor amzn.to/3xQNs3c
✅ Red And Green LEDs with 220 ohm resisters
✅ 5V DC motor pump amzn.to/3h622he
✅ 5V AC/DC adapter to supply regulated power
✅ Switch amzn.to/3b72oAt
✅ Jumper wires
✅ Plastic container for sanitizer
✅ Tube
✅ Foam board for making the main body (You can also use any plastic body)
✅ Glue gun
👉 Shorts Channel :
/ ujwalnandanwar
👉Circuit diagram:
github.com/un0038998/Automati...
👉Watch more videos:
/ hashincludeelectronics
👉Follow us on Instagram:
/ hashincludeelectronics
#automaticsanitizerdispenser #arduinoprojects #hashincludeelectronics - Наука та технологія
This is awesome... Very useful
Glad to hear that
Excellent work..👌👌👍
Thanks a lot 😊
Amazing ! Job
Thank you! Cheers!
Awesome idea
Thanks a lot
Excellent 👏🙌
Thank you so much 😀
Great work bro
Thank you so much 😀
Nice work
Thank you very much 👏🏻👍🏻
MST
Thanks Prakalp 👍🏻🙂
Hi, instant using of 5v relay we can use 1-channel relay
because i can't find 5v relay❤
@@parbatishrestha5430 yes you can 👍🏻👏🏻
you are wearing jumper wires male to female or male to male?
Hi there, just wanted to ask if it will continue pumping the sanitizer or if you have put a timer
It will continue pumping the sanitiser as long as hand is in front of the sensor 👍🏻👏🏻
@@hashincludeelectronics can it be designed such that once hand is detected for certain time it should dispense and stop and when hand is detected only it should pump, because kids may keep their hand for long time
what kind of jumper wire u used for the ground
and switch
Those are normal jumper wires 👍🏻👏🏻
Brilliant work😍 is it okay to make this as our product for our capstone but we will put liquid soap instead of sanitizer
Sure it’s totally fine. But make sure the liquid soap is good enough liquid because this 5v DC pump might not be able to pump thick liquid. In that case use good capability pump . I will leave it to you . All the best👍🏻
Hi, I did this as my project. However, when I on it, the red and green LED is on at the same time. The green LED didn't turn on when I put my hand on the sensor. I checked the circuit, but I'm still not sure what's the problem 😥
Thanks for checking out the video👍🏻Could you please try to adjust the sensitivity knob present on the sensor ? If it does not work then just check the sensor only first if it’s working . Connect 5v to sensor and see if the LED on sensor turns on if you bring hand in front of it . Then make connections step by step . Provide good 5v source adapter which has at least 1A current because dc pump takes more current while starting. I would suggest to go step by step and see if each component works fine .
😊@@hashincludeelectronics
harus root dulu ngga bg?
Really... Its awesome... Good work bro😊😁👍
Thank you so much 😀
semoga rejekinya dilancarkan 😍🥰☺☺🙏🙏
Thank you 🙏
its good, but its better to include timer because it could running with no stop if you put obstacle in front of sensor
Agree👍🏻However i coded in such a way that it should be responsive as long as hand is in front of the sensor . Yup we can code in different way and add delay after each liquid dispensing run.
Excuse me ,me again what do youm mean by all components? for example you said connect ground to all components.Is that a thing in the ir sensor or do you mean connect ground to all of the component's Grounds?
Yes. It’s “connect ground to all of the components ground “.
@@hashincludeelectronics Thank you so much.
Helloo! I'm only secondary student and planning to do this as my project and I'm confused how you jumper connection on another 2 connection while you only use one jumper?? I don't know if you get my point, however, do you remove the insulator of the jumper to combine the another jumper? I'm confused 😵
Thank you very much for checking out the video 👍🏻. Yes we need to connect jumper wires together. Please check the video for more details .
@@hashincludeelectronics thank you so much! Your video helps a lot
Hello , i followed your circuit diagram and did all things properly . Now the problem is that the sensor is working but the motor is not working . Also there's no issue in motor when checked directly
Is your relay working ??
can we put an arduino uno or mega... and program it.
If yes, how?
Yes we can . Please check the video for reference 👍🏻
Can we use tip 42 c transistor bro
Sorry but I am not sure about this transistor .
Hey can you the link for the adapter. Or suggest a alternative
amzn.to/49iVeVU try this
How did you connect in relay to ir sensor with also using led in middle of circuit
This step is given in the video . Also check the circuit diagram it’s very clear 👍🏻
What kind of 5v Ac/Dc adapter did you use? Do you have a link?
You can use any type of adapter which provides 5v output . Link is also provided in the description of the video 👍🏻👏🏻
I have ordered ir sensor from Flipkart and relay form amazon will it work if i connect it all like this or need to do any code
It will work 👍🏻👏🏻
@@hashincludeelectronics ok thanks
I want make a dispenser for my home. Your video is good enough for me. However i have one question. Will it turn off automatic , or i have to remove hand for cut off the dispenser circuit ?
Thanks for checking out video 👍🏻. Yup you have to remove your hand as programmed. But you can change this in code if you want to cut off dispenser after some delay .
@@hashincludeelectronics hi there, just wanted to ask how i could change the code for it to stop. And wanted to ask why you didnt use an arduino
@@hashincludeelectronics and how can i use batteries instead
Hi 😊 Is it necessary that we use foam board can we just use cardboard
Yes you can use that as well 👏🏻
What jumper wire is used? Male female?
You can use combination of these jumper wires . 👍🏻👏🏻
My prob is red LED and relay red LED keeps blinking but the ir sensor don't work. Also the waterpump. What should I do what is the problem
Please check the video slowly and carefully for any missing step👍🏻👏🏻. Also check the connections again 👏🏻
Can this be applied for adruino?
Yes you can . But there is no need of it . 👍🏻👏🏻
@@hashincludeelectronics Yeahh but it's for a project and an arduino is a requirement
Good evening, I tried making this using Ultrasonic sensor and by attaching a hose, but there seems to be a problem. Whenever I try to put the battery, it automatically starts pumping however, after that it functions normally. Can you tell me what went wrong? Thank you!
Good to see you tried different approach 👌 . Could you please check if initially the relay is off ? or if you can send me the code I can check
@@hashincludeelectronics I could not send my link in here, and I tried many times to comment but it's always gone. I contacted you on Instagram. I hope you could check it out. Thank you!
@@kanna7013 sure . I am checking it
@@hashincludeelectronics hi, we're having troubles again and I can't reach you in your Instagram, can you please help us out? Thank you
@@kanna7013 sure what issue are you facing ?
I am doing a School project So i can't plug it anywhere so is there any type of battery i can use?
Use 5 v battery only
@@hashincludeelectronics ok thanks
Can I connect the ground to a 5v charger and to lithium ion battery
You need to provide exactly 5v power 👍🏻👏🏻
can you explain in more detail about connecting jumper wires? I don't understand
Please check video slowly and carefully . Also take a closer look at the circuit diagram for more details 👏🏻👍🏻
that water pump is it call white horizontal
Yeah it’s just 5v water pump . It’s white as well .
Bro when I switch on my circuit ilmy DC motor turning on simultaneously why this happens acording to this it should give when I put my hand right please help me bro pls @hash include electronics
Did you check the IR sensor if it’s led glow when you bring your hand near it ? If there no hand then the led should be off . Also which relay is this ? Is it low level triggered or high level triggered ?
@@hashincludeelectronics bro that glowing led is not at all glowing only the power led Is glowing in the ir sensor .I don't know about that level bro
@@MoniKa-he5qs ok adjust the knob on that IR sensor .
@@hashincludeelectronics I did that too bro
Hello once again! My teacher ask me how does it word like electricity to ir sensor to water pump but I don't really know the whole function, components by components, If ever you have a time .. can you tell me the function from flowing the electricity to dispense sanitizer??? I really need it☺️☺️☺️
It is clearly explained in the video 👏🏻👍🏻
Can you please give a link of that wire like connector ?!.
It should be in the description of the video 👍🏻
Yes I have check that in description but it's not mention their
sir can u explain connections with clarity in description....i had completed the whole process for project , but the ir sensor is not working & the sanitizer is being dispensed when power gets ON
You need to calibrate the IR sensor . If you bring hand near sensor then the sensor LED should be turned on . When there is no hand then Sensor LED should be off. There is knob on sensor and you need to adjust it.
keren banget bang🎉🎉🎉🎉
Thank you very much 👍🏻
Where you connected adaptor
Please check the video for this step 👍🏻👏🏻
Can i use DC POWER TO POWER
Yes you can use . Use 5v dc supply .
Thank you now time to take out a proximity sensor out of my pocket-
👍🏻
2:38 Can you give me the link to buy it? because I have google 'adapter socket' but still I can't find it Thanks
That’s just a connector and I believe it comes with ac dc power adapter .
@@hashincludeelectronics Help I already shopped it but It isn't included 😭
@@hashincludeelectronics can u give me the link to buy 😭
@@Komui5555 then May be just cut the wires and use those . It’s just a power supply and you can connect wires normally . Like red and black wires .
@@Komui5555 that connector is not compulsory. You can simply connect wires from power supply to circuit .
Can you explain connection of adaptor
You can refer the connections diagram for this 👍🏻👏🏻
Hello everything is fine? Is there any way to make the code available?
There is no coding in this project 👍🏻👏🏻
Do we need any transistor in it or not?
No . Please follow the video 👍🏻👏🏻
@@hashincludeelectronics ok thank you bro
can you send the cm of the foam board
Not sure if this is what you are asking the thickness of the board was around 4-5 mm . 👍🏻👏🏻
is it the specific components list of this project is :
-5v relay 1 way (blue)
-ir sensor
-red and green leds with 220 ohm resister
-5v dc motor pump white horizontal
-5v ac/dc adapter 2a
-rocket switch 3 pin
-jumper wiyer 10 or 20cm
-plastic container
-tube
-foam board
-glue gun
Yup . Looks like the same list which I have provided in the description. 👍🏻
Can I buy it ??
Thanks for checking out video and showing interest in buying this device 🙂 . However I am not selling any products right now . It’s easy to make and you can do that by watching the video . I am sure , It will be fun 👌🏻👍🏻
i can't understand your pronouncation please list the ingredients🙏🙏
Don’t worry . All the details are in the video . Also check the description of the video where I have provided links and more details . 👍🏻
There is code for this project sir?
No code required for this project .
Hi is coding required?
No , coding is not required in this project 👏🏻👍🏻
Thanks 😊
Thanks for replying we are doing it for science exhibition 😊
Bayya send me the program
Thanks for checking out the video👍🏻There is no code as it is made without using Arduino. You just have to make connections as per circuit diagram (link in the description) and it should work . 👍🏻
Ok
I cant understand your digram sir
It’s very simple diagram. Take a closer look carefully 👍🏻👏🏻
@@hashincludeelectronics thank you sir i made it and worked
@@ashvikkharbanda2668 good job and well done 👏🏻
password nya detik berapa ya?🙏