Bitspower Titan One 2.0 PC Build - Time Lapse!

Поділитися
Вставка
  • Опубліковано 1 жов 2024
  • ⭐ Gaming PC WATER COOLING KIT perfect for BEGINNERS! ⭐
    Newegg.com links:
    - Bitspower Titan One 2.0: bit.ly/3E6bBbE
    - Bitspower Titan One 2.0 (combo kit that includes leak detector, 24-pin bypass connector, coolant and fill bottle): bit.ly/3fwfhJc
    - HIGHLY RECOMMENDED if you dont buy the combo kit. This is the 24-pin bypass connector to power your PSU and the pump to cycle the coolant: bit.ly/3Ck1Q8o
    Microcenter link:
    - Bitspower Titan One 2.0: bit.ly/3rhovvx
    Bitspower website:
    Bitspower Titan One 2.0: www.bitspower....
    Other PC Parts:
    Case: Lian Li O11D (Included in the Bitspower Titan One 2.0 kit)
    See above for links to the PC Water Cooling Kit
    CPU: Ryzen 9 5950x
    Amazon US: amzn.to/3TPGZQl
    Amazon UK: amzn.to/3z3VSX4
    Motherboard: ASUS X570E- Gaming
    Amazon US: amzn.to/3simdwG
    Amazon UK: amzn.to/3SrrnRJ
    RAM: G.Skill 32gb 3600MHz CL 16
    Amazon US: amzn.to/3gussLl
    Amazon UK:
    PSU: Corsair 750w
    Amazon US: amzn.to/3TMMAH6
    Amazon UK: amzn.to/3Tpamcc
    GPU: ASUS ROG Strix 3070ti
    Amazon US: amzn.to/3TploOT
    Amazon UK: amzn.to/3MXoXZT
    Fans: Bitspower Njord Dual Fin
    Newegg: bit.ly/3sizDZB
    PSU cables: Mainframe customs
    Website: mainframecusto...
    IG: / mainframe_customs
    Tikok: / mainframe_customs
    NVMe/SSD/HDD: Corsair MP400 NMVe
    Amazon US: amzn.to/3TsZrOJ
    Amazon UK: amzn.to/3sD3aO9
    Check out my Setup and PC on my Amazon Store: www.amazon.com...
    *Links are our Amazon or Newegg Affiliate links that support the channel at no extra cost to you.
    ► TikTok: / pcbattlestations
    ► Instagram: / pc.battlestation.setups
    ► Twitter: / pbattlestations
    ► Website: www.pcbattlest...
    ► Facebook: / pcbattlestations1
    ► Reddit: / pc_battlestations
    ► Twitch: / pc_battlestations
    #BeginnerPCWaterCooling #PCBuild #PCBattlestations

КОМЕНТАРІ • 14

  • @PCBattlestations
    @PCBattlestations  Рік тому

    How many times did you catch my face in the distro plate/front panel reflection? Free internet points will be rewarded to the correct answers...

  • @dark___matter_
    @dark___matter_ 6 місяців тому

    There’s just something about a cpu-water-cooled-only build with an air cooled gpu. The aesthetic is great

  • @garethsmith6611
    @garethsmith6611 Рік тому

    Hi PC Battlestations. I love your content and it inspired me to go buy a 3k custom pc. I have a Gigabite RTX 3080TI OC Vision but would like some expert help please. I find the card too noisy under load when gaming on battlefield and other titles. I have MSI afterburner but cannot for the love of me find a setting to really lower temps and noise. Any tips would be appreciated.

    • @PCBattlestations
      @PCBattlestations  Рік тому

      A 3080ti should be able to handle battlefield and other titles with ease. My guess is you may have to look at your pc cooling in general. Maybe you dont have good airflow and your pc’s running hot ramping up your gpu under load. Where did you get the pc and what case is it?

  • @勇翔翁
    @勇翔翁 Рік тому

    Can the GPU stand upright? Thanks

  • @brandonb8705
    @brandonb8705 Рік тому

    Can a GPU be added t this loop? And how would you add a 2nd radiator since a 360 wouldn't be enough for both?

    • @PCBattlestations
      @PCBattlestations  Рік тому +1

      Yup! There are inlet/outlets on the distro for a gpu. You could add another 360 rad on the bottom or side

    • @brandonbee9
      @brandonbee9 Рік тому

      @@PCBattlestations Would it be tough for a beginner?

    • @PCBattlestations
      @PCBattlestations  Рік тому +1

      @@brandonbee9 Its really not that difficult imo. If you have to add a water block to an air cooled GPU, that would be the hardest part but if you can follow instructions if your waterblock has one, its not that bad. Adding a radiator isnt hard either but then you're going to have to buy extra fittings for the gpu, distro and radiator. Also need to add PETG tubes and bend them so there is some extra costs for the tools and parts. But worth it imo if you wanna dive into it. Once you do it, its fun, cools your PC very well and looks awesome. I know it can be stressful first starting out. I can do some social media posts or YT shorts...even a full YT video of how to watercool (full YT vid could take a while though) but it needs to be done to help people out. Would this help you?

  • @OscarKr13
    @OscarKr13 Рік тому

    Beautiful build mate! Lovely vid! 0:25 ;)

  • @KingLaKek03
    @KingLaKek03 Рік тому

    First

  • @jacobrice3242
    @jacobrice3242 Рік тому

    Why cpu only loop?

    • @PCBattlestations
      @PCBattlestations  Рік тому

      This is a watercooling kit, Bitspower Titan One 2.0. Just wanted to do the default kit that doesnt have a gpu block since it depends on your gpu. You can still add a watercooled gpu since it does have the inlet/outlets on the distro for the gpu