Це відео не доступне.
Перепрошуємо.
Using Facemasks (vid
Вставка
- Опубліковано 17 сер 2024
- Hi Everyone. Facemasks took on a whole new level of importance when I started spraying in the workshop, and in this video I discuss the ones I use, and the one I recommend going forwards. Enjoy!
Note that the Trend Air Stealth mask comes with P3 dust filters as standard, and whilst these give a high level of protection for woodworking they are not intended for use when spraying. The Trend ‘Organic filter set’ offers a higher APF20 level of filtration which I understand is suitable for use in water-based mists e.g. spraying water-based paints. If you are working in gases and vapours e.g. spraying solvent-based paints, you will need a higher level of RPE protection e.g. ABE1P3 that the 3M 4277 mask offers.
If you have any doubt about the suitability of of RPE for the task at hand, please visit www.hse.gov.uk for more information.
Please use the ‘Like’ button if you liked this video.
Please subscribe if you think you’d like to see more.
Support me directly on Patreon - / 10minuteworkshop
Full list of ‘Stuff I use’ at www.10minutewor...
Connect with me on twitter @10minuteshop
Connect with me on Instagram - 10minuteworkshop
As an Amazon Associate, I earn from qualifying purchases made through these links:-
Used/featured in this video:-
Trend Air Stealth Facemask - amzn.to/2zah0P6
3M 4277 - amzn.to/2MOe9x8
Air quality monitor - Air quality monitor - goo.gl/CxNAaE
Graco Ultramax - amzn.to/2LHjVQv (US: amzn.to/2Mjq9ah)
Festool TS55 Tracksaw - amzn.to/2pGvzDS (US: amzn.to/2oOgGhw)
Festool PDC 18/4 - amzn.to/2s3J0eq (US: amzn.to/2tWUHEL)
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Hot glue gun - amzn.to/2u2CF8s (US: amzn.to/2u2cgYc)
Silicone brush set - amzn.to/2guo6Sm (US: amzn.to/2yEWbZI)
Silicone brush (single) - amzn.to/2l5rNTD (US: amzn.to/2zqFaQl)
Polyvine PolyTen PVA - amzn.to/2svT03N (US: amzn.to/2rmHYL3)
Lets 'Face' it, it's a brilliant UA-cam channel. Thanks for sharing your expert knowledge Peter.
Thanks! 👍👍
Another excellent video, I too did a bit of spraying and alot of sanding without a mask sometimes, like you said I have the bigger 3m mask but way to big and bulky and hence didn't wear it when I should have, now I have a disease known as COPD and it's know that I have ordered my trend mask. Should have done it years ago. Cheers for the info, always good to get a little reassurance from someone else who has made the purchase and is totally satisfied with it.
Hi Peter, useful video for anyone working with wood and paints etc. I do face fit testing as part of my job and the 3M stuff is good, as is the JSP push to test model. We have a lot of clients that standardized on the Sundstrom platform of SR100 silicone half mask. It's a very good mask that has a range of sizes s/m, m/l, l/XL, and is made from silicone, just like baking stuff, so doesn't rot over time in your toolbox and unlike rubber won't potentially cause a latex allergy. It can load 2 filters at once and a pre-filter to block larger particles and extend the filter life. Has 2 separate replaceable exhalation valves. A hard storage box, anti-septic wipes, pre-filter and other spares and accessories are available. Arco carry them at £29.99 + VAT currently. For folding facepiece type masks, I use 3M 9332+ Aura FFP3 when other masks don't fit people properly. The only way to know that your mask is working is to have either a qualitative rpe face fit test or a more accurate expensive quantative face fit test.
Thanks David - that’s really good info. What you’re really telling me is that my ‘does it fog my specs or not’ test isn’t good enough, right?? 😂👍😷
Peter Millard Not really, fogged goggles means it's leaking badly, not fogged is not a guarantee. On the Sundstrom SR100 hand over filter opening gives you a check as when you breathe in it should suck into your face if not and you can feel or hear the leak don't use. Your nose is usually the point of leaks and a range of sizes can help you with a comfortable and affective fit. The block inlet technique works on most masks, can be problematic for folding facepiece type masks and moulded paper valved types due to the nrd shape.
I have some severe respiratory problems which are impacted on with some very unusual nerve damage. The combination of these makes me very aware of my sell by date and I’m not making plans for my retirement. I always wear a face mask, but I can only wear them for short periods or the masks themselves can cause dysfunctional breathing which is a problem of mine due to the pain breathing causes. The Trend mask looks very good and I think I’ll be investing in one. Thank you very much Peter, too few people discuss or review masks.
Peter, I got into the habit of washing off the waterproof parts of the mask several times a day especially before I bagged it. And when I remembered I would wash out the bag too. A good, light, comfortable and flexible mask is essential if you expect to wear it for long periods of time. I will pay whatever I need to get those qualities in a mask. Usually it's a 3M, just not your model 3M.
Thanks George! Great idea about washing the mask down - I’ve been giving it a wipe over 👍👍
Very informative, bonus point for the transparency about trend, keep up with the great work
Thanks! 👍👍
Thank you, Peter. I really enjoy comparisons and even though I do a lot outside I've been looking at a mask when I'm sawing and doing other things that require a mask.
Cheers Steve. I know it’s tempting to think you’re OK when working outdoors, but we often get our faces uncomfortably close to the action when sawing & sanding, so always worth having a mask handy, I think. 👍👍
Thanks for the video, I've used the 3M masks for a while and two things came to mind:
1) You can get overspray covers to help them last longer in spray painting environments (on Amazon as 3M™ Overspray Guard, 400)
2) Had the same problem with the elastic like you showed at the end of the video. Eventually figured out you had to pass it through that friction fitting/clamp, and then through the eye which is further along the elastic. That keeps it in place so the friction clamp can do it's job.
Thanks James! 👍👍
Just got one last week - very pleased with it too.
Yeah, nice masks. 👍👍
I use the JSP Force 8 mask from Screwfix. I find it very comfortable and effective. And for some reason I don't get that funny metallic taste that I would get with disposable filter masks and the 3M respirator if I wore them for long periods.
I don't know if there are any about but, it would be good if a manufacturer could incorporate a directional exhale valve so that you can still blow dust out of the way. Used to have a respirator years ago that had the valve just at the right place and angle that allows me to do that. But it fell to bits and couldn't get the same again.
Keep up the good work.
Thanks John. That’s a great idea with the directional exhale valve, though I hate to think what it would add to the cost 🤔😆👍
My experience with dust:
I used to work in a chipboard plant (21 years) and used lots of different face masks form disposable to full face and powered, not really relevant but also trained with breathing apparatus as used by fire departments. Without a doubt full face is the best, but the tight seal around the face can be uncomfortable over a long period, next are powered units. I used the 3m airstream and they are really good. Having slowly increased my woodworking tools I found a real problem with dust, mainly sore eyes. So i bought googles the best seal I could find, these were no help. Next a cheap extractor which works well as a chip collector, but alas did not help the eyes. So bought a trend airstream and its great no sore eyes today. Heavier than the 3m but a lot cheaper, I am also thinking of upgrading my dust extracto to 1200 cfm and filter to a pleated one.
Good info, thanks! 👍
As ever Peter a very informative video thankyou
Cheers Andrew 👍👍
That just leaves the question of whether the Trend filter cartridges are more or less expensive than the 3M ones.
In the end I tend to find myself using a particle and organic solvent combination filter, because it's just more convenient than switching filters every time I want to apply wax to something. My preferred wax is turpentine based.
As for the expiration date, especially with organics filters, abide by them. By the time you can smell that the filter is no good anymore it's already way too late. Filters are cheap, lungs are not.
As I say, the 3M one I’ve mostly used is disposable, so no replacement filters at all. The Trend ones are about £10/pair here, I think. 👍
Filters are cheap to make, not to buy though. A pair is currently £9.37 on Trends website (plus shipping of £3.36) or a shade under £12 on Amazon (delivered).
Talk about a rip off. Conrad sells the 3M filters for €52, delivered per 10 pairs. And the masks are €20 a piece or €45 for a box of 4, including a pair of filters for each mask.
I use a Axminster Tools Evolution. Apf 10 for virtually all work (metal, wood, paint etc). Protects lungs, eyes, face etc and copes with beards and all sizes of face. Along with dust extractor snd Jet air filter box, it seems to prevent inhalation and irritation to eyes etc by very fine airborne dust (which is hardly visible to the human eye.
Thanks Peter. Looks like an excellent solution for prolonged work in hostile conditions, and as you say, works with beards too 👍
A big thank you Peter. I just bought myself that same trend mask after watching this video and they work 😆. I got Blepharitis on my eye lids from the saw dust having no eye protection as I have often had to choose the lesser of two evils to keep the mask and loose the eye protection because with the foggy glasses I could not see a thing out of any dust mask I used with the glasses. 👍
Cheers Kevin - glad it’s not just me that they fit 😂👍👍
I went for the M/L as advised lol my head looks a tad bigger than yours but you can never really tell from a video. 😅
😂👍👍👌
Hi Peter, tape over your track saw blade change window will improve your dust collection. Forces most of the saw dust towards the hose end.
Thanks Kevin. I have some taped up and some not - I’ve never found it to make a scrap of difference tbh, but appreciate you taking the time 👍👍
I havent started to spray as yet got the bits and bobs will have to look into buying s mask forgot about that part Thanks for the tips Peter
Cheers Bert! Yes, I completely forgot about the mask first time I was spraying - got caught up in the moment, lol! 😆👍
My favourite 3M disposable in the middle of the thumbnail and the first one you showed.
Yep, good mask
Hi Peter. Thanks for the tips in this video. I have been using cheap, disposable masks, which all fog up my safety glasses. I'll be trying the Trend one now. Cheers, Mark.
Hi Mark and thanks! Yes, these are a significant step up from the paper masks. Well worth the ££ 👍👍
The 3M mask usually comes with plastic zip bag which your post to place the mask in after you finish praying because of the carbon filters keep filtering after you've finished working... they are an expensive disposable mask I do quite a bit of DIY body work and pick diesel for around about £16 each
Fantastic timing Peter, I’m in the market for a face mask and wasn’t sure what to buy, thank you.
Cheers Julian 👍👍
Thanks Peter - I was just considering getting something better than the cheap 'fabric' types since I'm doing a lot of paint sanding at the moment. Timing couldn't be better for me. I've got Trend products already and have always been happy with them. The price is excellent !
Cheers Norman. Been very happy with the Trend mask 👍👍
I've just ordered one...
Thanks Peter, enjoyed the video. I liked your comment that you focus on dust collection at the tools. My hazy recollection of OHSA principles is that personal protective equipment, like the face mask are your last choice preceded by engineering solutions (dust extraction) and if possible elimination or redesign of the job.
Thank Bob! Yep, always best capture as much at the tool as possible 👍👍
whitedoggarage that's right, hierarchy of control, elimination 1st, substitution, engineering controls, and then absolutely last resort PPE. Trouble is most people go straight to PPE as it's cheaper and then your just playing the odds, can end badly and very frequently does. Check out www.hse.gov.uk for more information.
Thanks Peter. The Trend looks goo,d in both function and initial price, but it's another case of the "lets rip you off once you've bought one" philosophy with a singe set of replacement filters that probably cost pennies to manufacturer selling for over £9 on Trends website and almost £12 on Amazon (inc delivery).
It makes 5 dust bags for my Festool CT26 seem cheap at less that £27 and I never thought I would say that!
Cheers Steve. To be fair, that’s around the same price as other mask makers charge for their replacement filters, and cheaper than buying a whole new mask. But yes, it’s the razor blade / computer printer/ink business model all over. And Festool vac bags seeming cheap?? I think the heat’s getting to you, time for a refreshing beverage 😆👍👍
MDF dust and paint spray particulates in that little workshop - too bloody right you need protection. Glad to see you have suitable protection and a very worthwhile piece of equipment to boot! Thanks for the heads up. Being outdoors and very DIY I only use the bog standard 'white-cupped' little disposible masks, however, it was nice to hear corroboration of the 'steamy spectacles' scenario. That trend mask actually has me interested - cheers
Cheers Keith. Yes, any of these face masks are a step-up from the fold-flat disposable masks, but I particularly like the small-profile of the Trend 👍
just bought one with a hard cover for £34 from FFX. Good value and thank you for the recommendation.
Good mask 👍👍
Oof! You’ve got me again Peter! Nearly forgot about the mask to go with the Sprayer! Ordered and will be here in time for Mrs Make It to Boss me around, (read supervise!) this weekend! Regards, Andrew!
Another very helpful video Peter 👍 👍 👍 For spraying paint I use JSP Force 8 and find it great both for fit and effectiveness - especially the smell/vapour (probably due to the way it seals so well around the face). I do like the look of the Trend though 😎
Thanks Nick! The JSP’s a popular choice, good mask & filters, but still pretty bulky. Good to hear it works for you though. 👍👍
Im using a 3M 7500 I bought in the US yrs ago (recommended by the Woodwhisperer). There it came with P100 particle filters. Here in Europe I have replaced them with P3 filters for particles and ABEK1 for paint, etc. As I understand P100 in the US = P3 in Europe. Works great (even w my beard). A little flimsy straps, but absolutely no glass fogging.
Thanks. You can get the 7500 series here too, if course. My understanding is the ABE etc... classification is for solvent-based paints, vapours and gases, whereas P3R (AFP20) is OK with water-based paints. 👍👍
You're right. However, I use the ABE with all kinds of paints and mdf/other sheet with glue. I have asthma and was severely sick for 3-4 yrs after I exposed myself to lots of mdf dust.
Anyways, if you get the chance it would be interesting and useful to thoroughly test (even semi-scientific) the different masks on the market. I haven't seen any YT video of it yet.
Thanks! Yeah, no harm in over-speccing when it comes to your lungs - I’m asthmatic too - then you can have one solution for everything👍 WRT a more in-depth comparison of masks, I’m not sure how I’d manage that, visually, tbh - but worth thinking about 👍👍
Peter, I was looking to buy a 3M face mask here in Dublin. They where coming in at the €50 mark. Took a gamble with fleebay & got the same one for €10. I've did spray painting, insulation & other attic thing's & it worked. Comfortable. Doesn't fog up my glasses, breathing is fine after it.
Bargain! 😆👍👍
Hi Peter. A great video as always and it's always interesting to hear perspectives on PPE topics as we all have different sized heads, faces, hands ears etc. and getting a good fit might mean a completely different product rather than a change in size. Anyway my M/L Trend mask has got lost in the house move but I really liked it. It beats everything else I've tried (so far) and it needs to be good as I have an allergy to wood dust (oh the irony) so the Trend gets a double thumbs-up from me. 👍👍stuck with an RZ mask for now.
Cheers Karl! Bummer about losing you mask in the move! How are you finding the RZ mask? Never tried them but I know a few you tubers rave about them - maybe they were given them, lol! 👍👍
Mate, good honest and fair review. 👌
I'm really liking the profile of the new Trend mask. 👍
Might have to look into these, as I also have the dreaded fogging glasses caper to deal with.
Cheers Bill! Yeah, considering something like 60-odd% of adults wear glasses, it amazes me that more thought isn’t given to specs-wearers. 👍👍
I find a good ffp3 mask useful if you leave it ready to use next too the loo roll in the throne room ....... lol good video mate.
😂 - though more detail than we really needed 😱👍
Great video and thanks for the tip. I’m thinking of buying a Star Wars Stormtrooper outfit before it becomes compulsory to wear all over the body protection. On a serious note we are only given one set of lungs so best look after them. Thanks for posting.
Excellent choice - may I call you Darth?? 😂👍Thanks Mike 😎
Hi Peter I to use the 3M face mask which I like because of the low profile. The larger masks get in my line of vision . That trend look's very interesting thanks for sharing. Some time back I mentioned to you about a product called metal Lux wood filler it's a two part system with colours suitable for hardwood I wonder if you'd had any luck in finding and using it it can be obtained from a place called brewers they are paint suppliers once again thanks for sharing best regards Shaun 😀 p. S. As a rule of thumb if you can taste the product you are spraying it is time to replace your mask or filters.
Hi Shaun, and thanks! I remember you telling me about the metal Lux filler, but I haven't had a lot of time lately to chase these things up. I don't have a brewers particularly local to me, but I'll definitely take a look, thanks! And I think if you can taste what you're spraying, it's already too late... 🤔😬👍
Alot of woodturners recommend the Trend Airshield Pro, covers the whole head and is powered via a lithium ion battery.
Yes, they're huge though - and to be fair, woodturning is a particularly difficult operation to have dust collection at the tool, lol! 👍
The Trend mask is also ideal for Darth Vader impressions apparently 😃
It was sooo, sooo tempting 😆😂👍
On a more serious note it looks like a mask I'd actually wear, so thanks for the vid, I'll be getting one.
Just in time - my wife was just going on about getting one!
Excellent - and well worth it 👍
Interesting. I use the 3M currently but this may be a consideration after I run out of my supply of replacement filters. I wonder how effective it is on a bearded wonder like myself. I also notice on Amazon that it is a UK product but they will ship to the USA. Thanks Peter for the info.
Thanks Mark! Yes, it’s a bit weird - I either couldn’t find it on Amazon.com, or it was priced crazy high. Don’t know why they won’t ship abroad the pond. 👍👍
So, when will Trend be coming out with a mask & microphone combination unit? :) Or, using a cricket box with the straps behind your ears could transport you directly to the ball action at Lord's! (What a ghastly thought, sorry.) Good info, thanks and cheers, David.
😂👍👍
Not quite the same field but in the car spraying trade we refer to those 3M masks as the "fly masks" due to their appearance . They have a widespread use in my trade for the reasons you state, comfortable, easily adjusted for a great fit and relatively cheap (compared to a new set of lungs 🤣). Your niggle about the elastic straps might be cured by sliding the locking tabs into place (they weren't in that shot).
Personally I use an air fed mask due to the prolonged exposure to the nasty chemicals in automotive paint, but that's way outside the scope of this video. A dedicated compressor sending fresh air through multiple layers of filtration to an air hose attached to your mask would be OTT and not very convenient for woodworking! Makes you look like an astronaut though 😂
Cheers Andy! Yes, if I was spraying anything other than water-based paints, I’d definitely be looking at something like an air-fed system, especially if it was anything more than the odd half-hour mow and then. But the astronaut thing sounds pretty cool though 😂👍👍😎
A cricket box as a face mask!
😂
Interesting video Peter. I'm always on the look out for a decent mas. - beards are not usually mask friendly though!
Thanks! And no, I’m told beards can be a problem - one day I’ll be old enough to grow one... but not today 😂👍
The mask needs to create a seal with your skin to work. Beards and stubble prevent this. You cannot be face fit tested with beards and/or stubble. This was a major issue for testers discussed at the British Safety Council's Northern exhibition in Manchester last year. Everybody wants to be trendy, but your mask will give no protection. You really need a powered hood instead approximately £400-£5000.
Or start shaving, of course... 🤔😂👍
Peter Millard that's the main problem in h&s at the moment. It's a great hr nightmare for companies, who are liable for non-compliance, fees for intervention/improvement or prohibition notice potentially.
David you're correct, it also amazes me the number of people you will see spraying with a mask that is not rated to the product that they are spraying. It's not the particulate that is always the issue but the chemical composition as well, and this is where the weekend worrier often gets it wrong. A Peter mentioned, the need of additional filter materials depending on what is being sprayed if often missed.
I used to use the A1 version of the 3M mask and I really found it comfortable to use. Being a home gamer I of course completely ignored the life expectancy on it. After a (very very) long time I noticed I was feeling out of breath at the end of even short uses. The mask was filthy and clogged, a new mask fixed that right up. I also tried the paint/dust filter cover things at but I found them to make no difference whatsoever and were a complete waste of time.
Recently however I swapped to the JSP Force 8 mask with replaceable filters, currently P3. Initially I just had the medium one screwfix sell but found it too small so got the large version from Axeminster. Most comfortable mask I own now but it's certainly more than a little bulky so I may well look into the trend one and keep the JSP for A/B filters.
As a side note as a fellow glasses wearer I'd like to know what you do about eye protection. I've tried a number of goggles but so far they are either horrible and uncomfortable or don't fit over the glasses properly despite what the manufacturer says. This is an even bigger issue if I am also wearing my respirator.
Thanks Christopher. Yes, it amazes me that us spectacle-wearers (60-odd % of the adult population ffs) are so ignored! I’m looking into some prescription safety glasses but need to get my eyes tested first!
It really is silly, there seems to be a huge push for people to wear proper PPE but a huge %age of us just aren't catered for. I am just considering a full face mask but then it becomes a bulk issue like with the face masks. Maybe it's time to moan at some of the manufacturers!
Very interesting. I shot a similar video the other week about what I use. I have the added problem of a beard to deal with.
Hi Matt. Sorry, I didn’t realise - I’ll take a look! And beards - always a problem 🤔😆👍
Dont apologise. I have not published yet. I might get it up on Sunday as I look at different products to you.
Cool, always good to take a look at different products. I’m shutting you a quick email btw... 🤔😃
I saw a video were someone cobble together the mouthpiece from a snorkel and parts from a dust mask to make a custom... "respiratory filter" (technically not a mask). Seemed like a good idea paired with a nose clip. Downside being the condensation is so bad the thing needs a spit resovoir (gross I know) which creates a new set of problems.
Peter - Please tell us more about the air quality monitor that you use.
I need to do a quick video about it, but it’s just a cheap one I bought off eBay - bit.ly/Air_monitor - there are links to most things ‘used and featured in this video’ in the description of each video btw 👍👍
Good video Pete,I'd have thought the Trend would be more expensive and wouldn't have even looked at them. Do they have different filters for paint and dust available?
I bet the American viewers will be asking why you keep crickets in a box?
Cheers Graham. Right now they just do a P3 dust filter and an organic filter, though the organics are hard to come by - I’m still waiting for some. I think it’s a pretty new mask, so I’m sure the situation will improve 👍👍
I use the jsp force 8, it is bulky but at time it’s selling point was the press to check to prove masked sealed properly. Seems ok so far but always concerned removing filters will damage mask itself as soft rubber.
Interesting - don’t know that mask, I’ll take a look. 👍👍
MyTerryw s
Sorry gentlemans my keyboard has its own life..... nothing of intelligence to add or to say....
I use different types of dust masks depending upon the severity of the dust. Lots are uncomfortable and the ones for heavier use, I find are too big (get in the way of my safety goggles) for my small face.
Thanks Deanne. That’s exactly why I was interested in the Trend - pretty much one mask does everything (for me) in a compact unit with replaceable/ changeable filters. 👍👍
Thanks Peter, I will have to give the Trend mask a try. Your advice is invaluable. Thank you.
I'd not seen that Trend mask, thanks for the overview. I've started using a JSP Force8 mask recently and like it, the filters are large but point backwards giving a fairly flush front and the press-to-check function is great for checking the fit! I wonder whether the filters have different capacities - will those smaller Trend ones require changing more frequently?
Thanks! Yeah, very good point about the longevity of the larger filters, though in all honesty I'm far more likely to be throwing them away after 28 days than I am because they're clogged. But something to keep an eye on, certainly 👍
The maintenance free type masks are essentially disposable and are there for companies to manage their PPE without major COSHH records, maintenance, repair and cleaning, filter replacement issues. If you have 20, 50 or 100+ wearers that's a major task. With the 28 day buy, use at 28 days (or sooner depending on usage) throw away. Big cost and compliance saver. But follow the instructions though. Makes sense for a lot of people and companies when you do the maths and if your h&s management system can cope. That one you have in the video belongs in the bin. Good subject for video from the user's point of view nicely done. All information about RPE at www.hse.gov.uk along with all relevant information on legislation. Also check out the HSL (Health and Safety Laboratory) website, I did the face fit testing training and certification at Buxton.
Just to clarify David when you say ‘the one you have in the video belongs in the bin...’ you’re talking about the 3M one right? And the bin is where it is, along with all the other old bits masks I dredged up for the thumbnail. And thank you - excellent point about disposable masks being a way of achieving regulatory compliance without the record-keeping and paperwork 👍👍
Yes Peter, the green one that was originally blue. Most mask will give good protection if you have the correct fit. The problem I find is people that fall foul of the statistical bell curve and just fall outside the quartiles the manufacturer has designed around. Face too thin/fat, dental issues, etc. Straps are a pain, many a good mask won't fit properly because you can't adjust the straps enough or more frequently - at all. Tying knots in the straps causes other problems. Sadly it isn't a case of just buy a mask and wear it. It's a complicated affair sometimes. A few years ago, I was involved with a hardwood nasal cancer case of a woodworker who started in the 1960's and had the best masks available all throughout, but worked at home in shed with mahogany, oak etc, but only oak at work. Where did he get it? I met leading Professor in country who said most masks from back then were ineffective. The law asks has he got the industrial disease? Does he work in the industry? If both answers yes then firm liable.
MDF is suspected to turnout to be the new asbestos, so good fitted mask, H class extractor good idea.
Thanks David. 👍
Are any of these any good for a 10 year old kid, my brother has just got into wood working with me and I want to get him a mask so he isn't making the same mistake as me and going with out one for the longest time
No idea I’m sorry; the Trend one does come in a small size, might be worth a try? Great point though - we want to get kids involved at an early age, but need to be health & safety conscious at all levels. 👍👍
was your iron broke lol sorry could not miss the shirt
I believe you’re comparing apples and pears. P filters protect against dust particles. A,B,E and K protect against different vapours/gasses. Your new mask is only P3 while the 3M mask is ABE1P3. Can you make an update and clarify the difference between dust and vapours? People might believe a P3 mask will protect against paint thinners and such while it doesn’t.
Thanks. As I say in the video, this mask comes with P3 filters as standard, but higher-spec organic filters are available if you need that level of protection. My understanding is that the organic filters are APF20 which (in addition with P3) makes them suitable for working in ‘fine water-based mists’ which is what I get with the water-based paints I use, not gases or vapours that the ABE filtration spec refers to. But I’ll check with Trend and do a follow-up, certainly. 👍
hi i wondered if you have looked at the pop up spray tents peter
Hi Fred. I have, thanks - they tend to be a bit on the small side generally, or far too tall for benchtop use if they are big enough. 👍👍
Finally saw a facemask I like in the Trend. Unfortunately I just went to Amazon here in the US and it's a few pennies short of 90dollars!!!! Too bad.
Yes, I don’t know why they’re priced like that - I didn’t bother putting an Amazon.com link in ‘cos the prices were so crazy. May be available from other sellers, of course. 👍👍
I have a 3M half mask respirator. This may sound weird, but after my second time wearing it I noticed I was getting some pimples/acne around where the face seal meets my face. It happened on 2 different occasions. Now I use alcohol wipes to clean the rubber seal after or before I use it the next time. I wonder if this happens to anyone else.
Hi David. No, never happened with me; be interested to hear about anyone else having a reaction to it though 👍
Where did you buy it from for £22? It's 70p more expensive than the 3m one in your amazon links :-)
And worth every one of those 70 pennies *and* you’d be supporting the channel as well 😆 I think it was FFX doing hem for £21.95 - but only if you’re already ordering from them of course as the shipping would wipe put any savings 👍👍
Hi Peter, love all your videos👍 just a question on the trend air stealth face mask, I bought it after watching your video on it. Just I noticed it makes noise when breathe in and out, is this normal?
Hiya. Yes, it’s the valves doing their thing - making sure you only breathe in through the filters at the sides, and out through the exhaust valve at the base. I don’t get the full-on Darth Vadar thing, but it is noticeable 👍👍
Hi Peter, A lot of USA you tubers are using RZ masks and giving very good comments on them, have you tried one of them?
Hi John. I haven’t no; I had a quick look at the specs and being American they don’t seem to state the effective filtration in our terms eg P2, P3 etc... It’s possible I just need to dig a little deeper, of course, and I’d be very interested in trying them out in terms of fit, convenience etc... So one for a future video, maybe 🤔👍
Bought the Trend mask but had to return it - it makes a strange sound - like a cow farting in your face all day!
Weird - mine doesn't?? 🤷♂️
@@10MinuteWorkshop Maybe a faulty one - think someone else mentioned a Darth Vader sound which may be more apt!
Janky straps, pass ha ha ha, like the trend one though.
Apart from the straps it’s actually a really nice mask, but the Trend’s much neater. 👍👍
I wear glasses myself and have always struggled with air escaping and fogging them up, but the trend ones seem decent enough from your demo.
Do you think the small would fit a child?
Teenager maybe, but I think they’d be big on say a 10 year old. 🤷♂️👍
@@10MinuteWorkshop cheers mate, looking for something for 6 & 9 year olds
Ten minutes packed with useful stuff. Watch and learn youtube heros. You can say a lot in ten minutes or waste 30 minutes with speedy footage and no info.
Thanks! 👍👍
Dear Peter, I am sure for the professional or those doing cutting and spraying on a daily basis your video was of value. But to be honest as a hobbyist who does no spraying at all and does the cutting out in the open air it was of no interest. Nicely presented though.
Thanks Charles. Like the BBC, I try to inform, educate and entertain in my videos. All wood dust is hazardous; when I started out woodworking I also did all my cutting out in the open air. I wasn’t asthmatic then - I am now. I’m sure you can join the dots as well as I can. You only have one set of lungs - my advice is to wear a mask. 👍😷