👍 I do you have any idea of the pressure on this clutch disk? It must quite huge for not let it slip regarding that crazy torque. Do you use a pop filter?
How many starts is the current clutch good for? Can teams replace the pads between races? I remember back in the 80's the clutch was good for about 2 starts since there wasn't any pitstops back then.
@@TrippyRexTech he elaborated upon the joke and made a different one... You failed hard enough using referring to reddit in a yt comment section like a 12 year old but then to also not even make sense... Embarrassing...
The smaller a clutch is the harder it grips. Bigger ones grip more softly its easier to use. As well as it has multiple plates that give it more torque.
Thank you for taking the editing advice from the comment section of your last video. This is so much better. Easy to follow, and no hectic cuts, and a lot of screentime of this beautiful piece of engineering. Great stuff!
It's because the engine is connected to the larger plates(which are connected to the basket). So inside the clutch, the larger plates are driving the smaller ones(which are connected to the inside hub that goes to the gearbox). Hence large plate = driver, small plate = driven
I know that these videos are older, but I’m finding them now. As a newer to the trade mechanic these videos are helping me to understand what I’m working on. Granted there is a lot of difference between a daily driver Street car and a race car. But there’s also a lot of similarities to. My boss isn’t the type who cares why something works. He just cares that it does. I want to understand how something works so I know why it’s broken. Not just because it’s broken. These brake downs really help. I never went to school for mechanics and I wasn’t raised around it. So my school is UA-cam and and your channel is a big part.
One of those just beautifully crafted pieces that we rarely get to see because its under the engine cover. Titanium is a real bear to work with and these bits are just beautiful. Great video. Subscribed!
Thanks, great video that explains F1 clutches very well. Amazing how small these clutches are for the incredible amount of power/torque they transfer and modulate.
The same principle as my old '57 Chevy 283. What transformation! Had you not slowly explained, I would have believed the pressure plate/disc system gone with the dinosaurs.
As a mechanical engineering student that watches F1 and hopes to some day work in motorsport, this video is the best video that could've gotten recommended to me. Instant sub! Keep up the amazing work! :)
William Hendrix sorry, not from my experience, I passed on a 600 bandit, wet clutch, and I’ve personally only owned sports/super sports bikes, all wet clutches
I’ve got to say this is such a solid channel, excellent content, concise with excellent presentation. And that clutch....damnit I just love me some beautiful trick racing parts, titanium....sweet sweet titanium.
This might sound weird, but you said in the video that F1 car don't use clutch when they switch gear, how does that work? Im looking forward to learn more about it. Great video!
It is very similar to a motorcycle multiplate clutch. Except F1 is a dry clutch and a motorcycle is bathed in engine oil. Older Ducatis used a dry clutch but the have a couple downsides when used often, ( I .e. Chatter, can heat up and slip rather quickly and are jumpy or harder to modulate).... The spring is different too but on the lines of a KTM Belleville washer type. Instead of on large diameter pressure and 1 friction plate in most autos that still have manual transmissions motorcycles and F1 use multiplated smaller ones stacked.together to transfer the torque thru friction and pressure. Very simple but genius.
I don't know who you are, where you take these parts from, and how you meet such people.... but I subscribed instantly :D more of this stuff please! more!
Crazy how its just like an automatic trans clutch pack, i thought it would be very high tech but its the same theory and looks almost exactly like the clutch packs Ive replaced in my trans. Awesome channel love the videos
these shims are quite interesting! The know it's going to wear out, so they have shims of various thicknesses to be able to keep using the same stack for a while. When it's comepletely shot, replace it, and go back to the think shims. Thats really cool!
04:17 Oh, I always thought the Pressure Plate Diaphragm Springs, or "fingers" as you call them, are pushed by the Thrust Bearing. Well, you learn something new every day.
This clutch is used only when the car is starting from a stop and is controlled by the driver, not a computer. Once the clutch is engaged and vehicle reaches the next shift point the driver pulls the paddle the computer senses the paddle and at that point fires valves that essentially shift the transmission with no release of the clutch at all. The shift motor is a cylinder that is supplied air pressure at around 180 psi when commanded to shift. This pressure forces the internal components to shift from one gear to the next in a fraction of a second. You hear the engine rpm respond as the gearbox is slammed into the next gear. This happens much faster than human hands could ever acheive, that is why there is no grinding.
That's why with a little bit of modification and some serious springs you can put 500 horsepower through a motorcycle clutch. Multiple plates, tight tolerances and precision machining
So it requires pressure on the clutch spring to disengage it and be in neutral, and requires no pressure to engage the clutch and drive the gearbox? That does make sense from an overall efficiency standpoint since you should be driving more than you’re in neutral... but then, how do you start such a car? independently powered hydraulics?
Another interesting fact is that the driver actuates the clutch through 2 levers behind the wheel (similar to how he shifts gears) and its 2 levers for the same clutch because that way he can regulate it fast, easier. When only 1 of them is pulled, it translates into "50%" of a clutch pedal being pressed, so at the start of race he just releases one and it goes from 100% to 50% in a split second, then after good rpm he releases the second one
Martin Brundle always says when commentating that these clutches were the size of a fist. He wasn't wrong, the first time I've seen one. thanks for sharing and great explanation
The videos you do are cracking. Loved F1 for years, since moving out from mum and dads i enjoy the pre race and post race just as much as the race itself. something to do with the misses watching reality tv this is my get away at a weekend! Something that i feel has changed as the sport has become better followed over recent years. One question i do have i drive a highly modified car with a multi paddle clutch. Why do F1 cars use a a multi plated clutch and what does it give as a benefit? kind regards sir and keep up the cracking work :) love the insights
Same as a Motorcycle clutch, more expense, absorb more power perhaps but fundamental the same. Interestingly a motorcycle has used sequential gear change for years and many, including my own a quick shifters that disengages the engines ignition momentarily so that gear changes are seamless..hence the very distinctive sound of the Bikes exhaust note when one is in use..
So basically compared to normal manual transmission car, this has much smaller diameter discs, much stronger springs, uses titanium instead of steel everywhere and friction material is fully made out of carbon. And because the springs are so hard, the hydraulic system is run by the engine, instead of simple pedal connection as in normal cars. And most normal cars have just one friction disc and this has three. But other than that, it's exactly like the clutch in a Ford Mondeo with manual transmission.
We could really use a refresher course in Brake Bias and how to adjust for understeer and oversteer. If Brake Bias affects these reactions in cars, which I think they do? While we are on that subject discuss front and rear wings too. How to make sense out of all of these settings in the garage overwhelms me and I just freeze up (F3 - iRacing).
Ok, so improved materials, but it works very much the same as most car and bike clutches. I was expecting something special. Pity for me ;) Feels like I just spend way too much time on "how a clutch works", this I already knew. Thanks anyway for the nice footage.
With the power F1 cars have I expected a much larger clutch. But I guess it comes down to surface area and having multiple plates is a great way to keep a large surface area while having a small diameter and smaller moment of inertia so you can rev quicker.
normally, im annoyed when i'm told/asked to subscribe in the middle of a video. different story today - this was so well presented and explained, interesting and easy to follow that you bet your ass i clicked that button when you reminded me! awesome stuff mate! :)
Very nice explanation, thanks for posting! One thing I wonder is why do they put the clutch lever on the steering wheel instead of on a foot pedal? It seems the left foot is free and the hands have enough to do?
The weight of the clutch compared to a mondeo was good to know. What I would like to know is how the total vehicle weights compare. Both kerb weights and the rotational inertia of each. I think that it will be massively different.
They are designed to be used only a few times during a race, its not something they use costantly. Remember the Toyota retirement a couple of years ago during le mans? it was because of a clutch failure, the driver basically used it like he was driving a normal road car (not for his fault, there was some multiple misunderstandings), so the clutch heated up a lot and then broke.
Basically a multi-plate clutch. Kind of an interesting dilemma that they definitely need a clutch to start and stop but during the race they never need it except for in a spin situation, so it's all just ballast.
Looks almost like a motocross bikes clutch, my old race bike had a henson clutch with a billet basket. Pretty much works the exact same way. And look very similar
Clutch is what we always use but most people have no idea how it works. Thanks for bring up this topic! TBH I'm more of a bike person so F1 feels more like a golf to me (a sport that feels more exclusive for rich people). But your explanation on technical side of things makes me interested in F1 technologies and started to appreciate the sport and it's athlete.
It's cool seeing this stuff because there's no magic to it really. It's just a regular multi-plate clutch but made of high performance materials and manufactured with extreme precision. Same as the gearbox and brakes. They're the same as on your car, just better
Would have been interesting to know exactly what the clutch plate material/make up is, it looked some sort of 'lattice' ! also the diaphram, must be some trick material to keep it's spring, in such a hot enviroment.
Good video! Would you happen to know where i can find the rules in regards to an F1 Clutch and all of its components? We build some of the trickest gadgets for slipping clutches. Built specifically for drag racing were we are controlling 200-800 hp motorcycles. One class specifically is Real Street. We are limited to a completely hand operated stock clutch now. In the past before all of the rules / restrictions we developed extremely clever devices that even today would give an advantage to and f1 driver on the start. Or if rules don't allow such devises training on one of the 400hp Real Street bikes might help. We train lots of motorcycle road racers just for the start procedure.
Yeah this is proper, I believe if you have a better understanding of how the car works Eg, If you can understand the clutch more you will have a better start, You can understand the limits more, So yeah this is a good idea, Will be watching more of these coz I do believe when you understand how something works you can use that something to your advantage, I am starting to learn the set ups on ACC, Again, When you understand aerodynamics you can get more handling, Few months ago I was 2500 on a special event on ACC, Now I am in the 400s, Hoping to get in the top 50s tho, Any videos on how to stop the rage quit lol, I've had days where I am like a learner driver in a first lesson lol, But I am getting better, Trying to save up for a PC but never can so stuck with console, It's too limited, Just 2 sim games good enough an that's assetto corsa, Consoles needs too include all titles you can get on a PC, Far too much greed in the industry as far as I'm concerned tho, Again class video, I will be watching all the others that's for sure, Just putting some sim racing practice in, I really wants to have a go at racing in a league, But needs to be good first, Not going to be that person who destroys everyone else's race coz I can't drive properly or don't know the track, I am fed up of people in lobbies find it fun to think it's wreckfest, An destroy your race for the sake of it, I blame the parents myself, lol.... Class video tho, Cheers for putting em together, It's always good too learn new things....
Anyone else get the box from hellraiser vibe when he's taking apart the F1 clutch. Serious just waiting for pinhead to say it was your hands that called us.
Nice one I did watch your brake video and I subbed after this one I'm excited to see your next one. Maybe reach out to your connections and get some motogp tech if possible
so its basically a normal clutch thats made into multiple layers but smaller diameter. so at higher RPMs theres less stress on the outer edge on the disc
How beautiful is this clutch?
➤ Subscribe for more F1 engineering videos: goo.gl/AbD2f9
I love this series. but how do you get the parts you make video of.
👍 I do you have any idea of the pressure on this clutch disk?
It must quite huge for not let it slip regarding that crazy torque.
Do you use a pop filter?
Excellent explanation. Impressive evolution isn’t it? Incredible that such a small unit can absorb so much pressure and heat energy.
How many starts is the current clutch good for? Can teams replace the pads between races? I remember back in the 80's the clutch was good for about 2 starts since there wasn't any pitstops back then.
I was thinking the same thing, work of art.
The first line of the vid was so casual.
"I've got an F1 clutch here"
Ah yes no biggie, just another F1 clutch
I know right. Like he has a bunch of f1 clutch sitting down casually in his drawer
I mean.... it isn't.... it's just a piece some manufacturer threw away, it's not the rocket engine of Apollo 2
Exact same though hahah
Like that one guy that ordered a BMW clutch off amazon and received an F1 clutch instead.
@@outremer91 :))
At the end of the series:
"How to put an F1 car back together"
No, the parts you see in these video series are the parts that are left over after he reassembled the F1 car...
@@bjofuruh r/wooosh
@@TrippyRexTech he elaborated upon the joke and made a different one... You failed hard enough using referring to reddit in a yt comment section like a 12 year old but then to also not even make sense... Embarrassing...
Trippy Rex r/IhaveReddit r/ThereWasAnAttempt
Oh now that would be amazing to watch.
It's crazy that simple friction plates can transfer so much power without slipping, even for road cars it's amazing.
wow I never expected an f1 clutch to be so small, it's so cute.
adorable , even...
I want to have one in my room
A dog is cute. A clutch is awesome. (:
The smaller a clutch is the harder it grips. Bigger ones grip more softly its easier to use. As well as it has multiple plates that give it more torque.
Yes it the most cute adorable more expensive than a nasa computer ever
Thank you for taking the editing advice from the comment section of your last video. This is so much better. Easy to follow, and no hectic cuts, and a lot of screentime of this beautiful piece of engineering.
Great stuff!
scott acquires one piece bit by bit to one day secretly assemble a whole F1 car ☝🏼🧐
Likely end up with the Johnny Cash replica,one piece at a time. Front end is all Lotus 49 bolted to the rear of a Merc W11.
@@howardosborne8647 Imagine if someone made this in Assetto Corsa or AMS
@@howardosborne8647 ahhh, no you beat me to it. 🤣
Seb
How'd he get on
It's now 2021 June
Has he got the free self build💥
3:07 "I'll explain why we have the names for these plates ... a little bit later."
Narrator: But "a little bit later" never came.
It's because the engine is connected to the larger plates(which are connected to the basket). So inside the clutch, the larger plates are driving the smaller ones(which are connected to the inside hub that goes to the gearbox). Hence large plate = driver, small plate = driven
Friction plate drive plate
Optimus prime called, he wants his knee joint back.
but its for a f1 tho-
@@skmuchina no shit sherlock
I know that these videos are older, but I’m finding them now. As a newer to the trade mechanic these videos are helping me to understand what I’m working on. Granted there is a lot of difference between a daily driver Street car and a race car. But there’s also a lot of similarities to. My boss isn’t the type who cares why something works. He just cares that it does. I want to understand how something works so I know why it’s broken. Not just because it’s broken. These brake downs really help. I never went to school for mechanics and I wasn’t raised around it. So my school is UA-cam and and your channel is a big part.
One of those just beautifully crafted pieces that we rarely get to see because its under the engine cover. Titanium is a real bear to work with and these bits are just beautiful. Great video. Subscribed!
Ok, I think I got it. Now, can you do one on the science behind adjusting the time on dash clocks?
Thank you for this knowledge. I really admire your work and profesionalism on your channel.
Hats off!
Excellent video. Guy explaining the bite point in modern cars also does a fantastic job.
Thanks, great video that explains F1 clutches very well. Amazing how small these clutches are for the incredible amount of power/torque they transfer and modulate.
Another top video from Driver61. Love the way he explains everything since it is accessible yet comprehensive 👍🏻
Its amazing that something that size can handle the torque and power that it transfers to the gearbox. Seriously amazing material development.
The same principle as my old '57 Chevy 283. What transformation! Had you not slowly explained, I would have believed the pressure plate/disc system gone with the dinosaurs.
As a mechanical engineering student that watches F1 and hopes to some day work in motorsport, this video is the best video that could've gotten recommended to me. Instant sub! Keep up the amazing work! :)
Man I love these videos that explain the technical side of F1
same as a motorcyle dry clutch!
that costs as much as a motorcycle
Apart from motorbike clutches are wet 🤷🏻♂️ or at least the bikes I’ve ridden have wet clutches
Faith n’ Fitness plenty of dry clutches on racing bikes and ducatis
William Hendrix sorry, not from my experience, I passed on a 600 bandit, wet clutch, and I’ve personally only owned sports/super sports bikes, all wet clutches
Not even in the same league. Think again.
Auch a good Video! I had no clue about the differences between a normal clutch and F1 car clutch but you really made it clear and easy to understand!
I’ve got to say this is such a solid channel, excellent content, concise with excellent presentation. And that clutch....damnit I just love me some beautiful trick racing parts, titanium....sweet sweet titanium.
Brilliant construction and simple explanation...
This might sound weird, but you said in the video that F1 car don't use clutch when they switch gear, how does that work? Im looking forward to learn more about it. Great video!
At about the 2:13 mark, I marvel at the beauty of each piece. Each piece is a work of art, really.
It is very similar to a motorcycle multiplate clutch. Except F1 is a dry clutch and a motorcycle is bathed in engine oil. Older Ducatis used a dry clutch but the have a couple downsides when used often, ( I .e. Chatter, can heat up and slip rather quickly and are jumpy or harder to modulate).... The spring is different too but on the lines of a KTM Belleville washer type. Instead of on large diameter pressure and 1 friction plate in most autos that still have manual transmissions motorcycles and F1 use multiplated smaller ones stacked.together to transfer the torque thru friction and pressure. Very simple but genius.
This videos are always very interesting. What fascinates me the most is the simplicity to achive top performance. Take care.
Your explanation is more interesting than any F1 race since 1999.
I'm sold. Subscribed... Super well done and very easy to understand
How am I only just learning about this channel 🤷♂️😔this channel is one of best channels for f1 and motorsport fans 💯
I don't know who you are, where you take these parts from, and how you meet such people.... but I subscribed instantly :D more of this stuff please! more!
if i remember right he was a boss gp driver a series that uses ex f1 cars so I guess from that
Crazy how its just like an automatic trans clutch pack, i thought it would be very high tech but its the same theory and looks almost exactly like the clutch packs Ive replaced in my trans. Awesome channel love the videos
Perhaps more emphasis could have been made on its the diaphram spring pressure that locks the engine flywheel and the trans input shaft together.
these shims are quite interesting! The know it's going to wear out, so they have shims of various thicknesses to be able to keep using the same stack for a while. When it's comepletely shot, replace it, and go back to the think shims. Thats really cool!
Cool desk trinket. Much smaller than I expected.
I want to try this clutch! 🙃 Thank you for very interesting video!
Wow!! Love these videos. Thanks, Dan from Limerick- Ireland. (Racer and big F1 fan)
04:17 Oh, I always thought the Pressure Plate Diaphragm Springs, or "fingers" as you call them, are pushed by the Thrust Bearing. Well, you learn something new every day.
For what it’s worth, the ring that as attached to the slave cylinder is the throwout bearing.
Your channel is the channel I dreamed since I was a kid, congrats
This clutch is used only when the car is starting from a stop and is controlled by the driver, not a computer. Once the clutch is engaged and vehicle reaches the next shift point the driver pulls the paddle the computer senses the paddle and at that point fires valves that essentially shift the transmission with no release of the clutch at all. The shift motor is a cylinder that is supplied air pressure at around 180 psi when commanded to shift. This pressure forces the internal components to shift from one gear to the next in a fraction of a second. You hear the engine rpm respond as the gearbox is slammed into the next gear. This happens much faster than human hands could ever acheive, that is why there is no grinding.
I do love your explanations and your accent driver61 🥰
Great insight into a complex and awesome piece of engineering!!
Thank you so much! I have always wondered what an F1 clutch looked like. Thanks for disassembling it that looks amazing.
Thanks for the info, I always wondered about how they worked. I’m subscribing.
That's why with a little bit of modification and some serious springs you can put 500 horsepower through a motorcycle clutch. Multiple plates, tight tolerances and precision machining
So it requires pressure on the clutch spring to disengage it and be in neutral, and requires no pressure to engage the clutch and drive the gearbox?
That does make sense from an overall efficiency standpoint since you should be driving more than you’re in neutral... but then, how do you start such a car? independently powered hydraulics?
Amazing Video! I always knew an F1 clutch was small....but OMG! Didn't know they were tiny!.... great channel and content!!....😁
Basically a motorbike dry clutch assebly. With a couple of extra fancy bits. It's a very reliable system.
pretty amazing. i thought it would be this huge big complicated thing but it's tiny and simplified
Another interesting fact is that the driver actuates the clutch through 2 levers behind the wheel (similar to how he shifts gears) and its 2 levers for the same clutch because that way he can regulate it fast, easier. When only 1 of them is pulled, it translates into "50%" of a clutch pedal being pressed, so at the start of race he just releases one and it goes from 100% to 50% in a split second, then after good rpm he releases the second one
Actually that was banned a few years ago.
@@Driver61 Didnt know it was banned, but then what did Craig mean that Bottas went back to twin paddles last year?
Adjusting the clutch stack thickness is a big part of adjusting clutch feel for drag racing.
Martin Brundle always says when commentating that these clutches were the size of a fist. He wasn't wrong, the first time I've seen one. thanks for sharing and great explanation
this really is a sensational channel
Amazing that it can work that well, while being THAT small.
These F1 videos are interesting. Subscribed!
Best UA-cam engineering channel!
If you want to learn to drive fast on a track, this is the channel.
Engineering Explained channel is better for "how cars work".
Fantastic video full of great content. Thanks Driver61!
Another great video! Really enjoying your channel mate. Keep it up!
Size wise that could well be a motorcycle clutch. Works exactly the same way too. Crazy that this is sufficient for a F1 car
The videos you do are cracking. Loved F1 for years, since moving out from mum and dads i enjoy the pre race and post race just as much as the race itself. something to do with the misses watching reality tv this is my get away at a weekend! Something that i feel has changed as the sport has become better followed over recent years. One question i do have i drive a highly modified car with a multi paddle clutch. Why do F1 cars use a a multi plated clutch and what does it give as a benefit? kind regards sir and keep up the cracking work :) love the insights
Same as a Motorcycle clutch, more expense, absorb more power perhaps but fundamental the same. Interestingly a motorcycle has used sequential gear change for years and many, including my own a quick shifters that disengages the engines ignition momentarily so that gear changes are seamless..hence the very distinctive sound of the Bikes exhaust note when one is in use..
So basically compared to normal manual transmission car, this has much smaller diameter discs, much stronger springs, uses titanium instead of steel everywhere and friction material is fully made out of carbon. And because the springs are so hard, the hydraulic system is run by the engine, instead of simple pedal connection as in normal cars. And most normal cars have just one friction disc and this has three. But other than that, it's exactly like the clutch in a Ford Mondeo with manual transmission.
We could really use a refresher course in Brake Bias and how to adjust for understeer and oversteer. If Brake Bias affects these reactions in cars, which I think they do? While we are on that subject discuss front and rear wings too. How to make sense out of all of these settings in the garage overwhelms me and I just freeze up (F3 - iRacing).
Ok, so improved materials, but it works very much the same as most car and bike clutches. I was expecting something special. Pity for me ;) Feels like I just spend way too much time on "how a clutch works", this I already knew.
Thanks anyway for the nice footage.
With the power F1 cars have I expected a much larger clutch. But I guess it comes down to surface area and having multiple plates is a great way to keep a large surface area while having a small diameter and smaller moment of inertia so you can rev quicker.
Awesome vid! I now know what a clutch is!
normally, im annoyed when i'm told/asked to subscribe in the middle of a video. different story today - this was so well presented and explained, interesting and easy to follow that you bet your ass i clicked that button when you reminded me! awesome stuff mate! :)
Very nice explanation, thanks for posting! One thing I wonder is why do they put the clutch lever on the steering wheel instead of on a foot pedal? It seems the left foot is free and the hands have enough to do?
Really interesting video! Love both your irl and sim racing content!!👌
All that horsepower transmitted through 10 small bolts holding the cage to the flywheel!
Amazing...
The weight of the clutch compared to a mondeo was good to know. What I would like to know is how the total vehicle weights compare. Both kerb weights and the rotational inertia of each. I think that it will be massively different.
My Yamaha R6 probably has a clutch this size.
Cannot imagine how this thing survive 1000+HP.
My first thought is if I could make this work on my kawasaki hah.
Bet your R6 clutch weights more :D. This looks smaller than my 80bhp Suzuki.
@@jordan9339 so true this thing is amazing
They don't use clutch much that's how.
They are designed to be used only a few times during a race, its not something they use costantly. Remember the Toyota retirement a couple of years ago during le mans? it was because of a clutch failure, the driver basically used it like he was driving a normal road car (not for his fault, there was some multiple misunderstandings), so the clutch heated up a lot and then broke.
Brilliant stuff man.
Looks incredibly similar to any motorcycle clutch. Funny, you can also make clutchless gear changes (both up and down the box) on any motorcycle.
I did not know titanium was that color. Cool video!! It looks like a motorcycle clutch but a nicer color and costs more than my bike 😅
It is not ;-) the gold color is almost certainly anodizing.
Basically a multi-plate clutch. Kind of an interesting dilemma that they definitely need a clutch to start and stop but during the race they never need it except for in a spin situation, so it's all just ballast.
Looks almost like a motocross bikes clutch, my old race bike had a henson clutch with a billet basket. Pretty much works the exact same way. And look very similar
Very similar to a motorcycle multi plate clutch. A very interesting video and I'm sure that's a very expensive bit of kit....
having fun with the " nomenclature " differences . however , "basket" sounds weird, it is as accurate as any other term . rock on
Can you do a video talkin about the driving tecnique for the 911, especialy the old versions
Clutch is what we always use but most people have no idea how it works. Thanks for bring up this topic!
TBH I'm more of a bike person so F1 feels more like a golf to me (a sport that feels more exclusive for rich people). But your explanation on technical side of things makes me interested in F1 technologies and started to appreciate the sport and it's athlete.
I don't know why you don't have 10 million subs
It's cool seeing this stuff because there's no magic to it really. It's just a regular multi-plate clutch but made of high performance materials and manufactured with extreme precision. Same as the gearbox and brakes. They're the same as on your car, just better
Great video. Are you sure American manufacture Tilton isn’t making F1 clutches anymore?
Great content we always hear how much everything costs it’s great to see the various parts and how they work tanks and keep it coming
Never thought it would be using such old technology for the clutch, basically an updated version of a motorbike clutch
Would have been interesting to know exactly what the clutch plate material/make up is, it looked some sort of 'lattice' ! also the diaphram, must be some trick material to keep it's spring, in such a hot enviroment.
Oh wow!! the clutch paddle is much like a motorcycle clutch lever
Good video! Would you happen to know where i can find the rules in regards to an F1 Clutch and all of its components? We build some of the trickest gadgets for slipping clutches. Built specifically for drag racing were we are controlling 200-800 hp motorcycles. One class specifically is Real Street. We are limited to a completely hand operated stock clutch now. In the past before all of the rules / restrictions we developed extremely clever devices that even today would give an advantage to and f1 driver on the start. Or if rules don't allow such devises training on one of the 400hp Real Street bikes might help. We train lots of motorcycle road racers just for the start procedure.
That was very informative.. Learned something new today... Thanks. 🙏
Good explanation
Yeah this is proper, I believe if you have a better understanding of how the car works Eg, If you can understand the clutch more you will have a better start, You can understand the limits more, So yeah this is a good idea, Will be watching more of these coz I do believe when you understand how something works you can use that something to your advantage, I am starting to learn the set ups on ACC, Again, When you understand aerodynamics you can get more handling, Few months ago I was 2500 on a special event on ACC, Now I am in the 400s, Hoping to get in the top 50s tho, Any videos on how to stop the rage quit lol, I've had days where I am like a learner driver in a first lesson lol, But I am getting better, Trying to save up for a PC but never can so stuck with console, It's too limited, Just 2 sim games good enough an that's assetto corsa, Consoles needs too include all titles you can get on a PC, Far too much greed in the industry as far as I'm concerned tho, Again class video, I will be watching all the others that's for sure, Just putting some sim racing practice in, I really wants to have a go at racing in a league, But needs to be good first, Not going to be that person who destroys everyone else's race coz I can't drive properly or don't know the track, I am fed up of people in lobbies find it fun to think it's wreckfest, An destroy your race for the sake of it, I blame the parents myself, lol....
Class video tho, Cheers for putting em together, It's always good too learn new things....
Anyone else get the box from hellraiser vibe when he's taking apart the F1 clutch.
Serious just waiting for pinhead to say it was your hands that called us.
Nice one I did watch your brake video and I subbed after this one I'm excited to see your next one. Maybe reach out to your connections and get some motogp tech if possible
so its basically a normal clutch thats made into multiple layers but smaller diameter. so at higher RPMs theres less stress on the outer edge on the disc
You had me at "I have an F1 clutch here". Color me green with envy.
Absolutely stunning - great vid
Pretty similar to a clutch on motorcycles where you have a basket, clutch plates and shims/spacers.